Having problems with your Dishwashers ?

Gateway Timeout The following error occurred: [code=DNS_TIMEOUT] A DNS lookup error occurred because the request timed out during the lookup. -------------------------------------------------------------------------------- Please contact the administrator.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway Timeout The following error occurred: [code=DNS_TIMEOUT] A DNS lookup error occurred because the request timed out during the lookup. -------------------------------------------------------------------------------- Please contact the administrator.


... Dishwashers

Please help We turn the machine on and error #304 pops up. The units almost up toTemperature but doesn't quite make it. A day or two before this washappening error #203 had popped up a couple times. The operationsmanual states the reasons for some other errors but not these.


Hi, you dont state the make and model of your machine. ... Dishwashers

Hi Again, It is us with the dishwasher that we were going to do the test on on Sunday. We have made a mistake in trying to reject another person and accidently it seems rejected you instead. Please contact us again at [email protected] or on here. Please...we are so sorry, it is our first time on here so we did not know how things worked


Hello again,\015\012\015\012I understand.\015\012\015\012 I actually could see the issue was unresolved however, the way it works on here (I think ?) I was `locked`out when my suggestion was rejected I guess ? I am fairly new ... Dishwashers

I have a prima lpr600 fully integrated appliance. it appears to start - emptying machine to begin with, then starting to pump in water - but then starts to beep continuously! the display light flashes 11 times before a pause, but i cannot seem to find what this error code means. please help!


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My samsung Dish washer DMS300TRS is giving the F5 message error for the second time in 2 days. Can you help please?


I have this same model and there is a warning\015\012DMS300TRS ... Dishwashers

I have just installed a ADP5000WH and it successfully completed 2 washing actions. Now when I try to do a third load it comes up with Error 1 which according the manual means longer inlet time and the cause is the faucets are not opened. Nothing has been changed since the first two loads. Can you please advise.


... Whirlpool 24 in. DU920PW Built-In Dishwasher

Hi, I have an aeg 60870 dishwasher showing error code 30 and the pump is going all the time, even when you open the door, any suggestions of things i could try please?


Sounds like the Anti-Flood system activated (polystireen float at base of machiene coupled to a micro switch) the purpose of this system is to put the drain pump on and stops any other function on the machiene. The anti lood system activates when any ... AEG 24 in. Favorit 60870M Free-standing Dishwasher

Kenwood kdw12st3a does not drain. Flashed e4. Emptied, cleaned filters and poured through boiling water. Not improved. Still water in bottom although did complete cycle without flashing error code that time. What parts could be faulty please? Am prepared to have a go at replacing if not too difficult. I note that I can purchase most parts from Kenwood etc. Many thanks!


... Kenwood Dishwashers

Im receiving an OE error code on my LG Dishwasher Model LDF7811st. The machine runs for a little bit and then it dings a few times with the "OE" code and stops running. HELP please


The LG error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

My fagor lf 65it dishwasher won't turn stop running. The error bleeps four times indicating overflow but there is no problem here and it won't reset. Any ideas please?????


... Fagor LFA-65 IT Dishwasher

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks. My dishwasher showed the error code either OE or E1, I think it was more OE. I stuck my hand in the filter in the bottom of the machine and then it was okay but the next time it was used it leake


What sort of soap powder do you use\015\012some soap powders foam a lot in machine causing dishwasher to leak through seals\015\012also check that the machine is square that is the door is closing parallel with cabinet\015\012do no ... Dishwashers

MDB9750AWB, maytag legacy quiet series 300. only runs in short cycle. error code 2 on digital display. Please advise on possible options for D-I-Y repair. Thankyou for your time and assistance. Do not have access to a manual.


... Maytag 24 in. MDB9750AW Dishwasher

Samsung dishwasher (DMS300TR) keeps throwing an F5 error every time. Can you please help?


... Dishwashers

AEG Diswasher Model / Favorit 44080IM PNC 911925601/01 (located in UK) Wash cycle finish light flashes 5 times in sequence then starts again - please advise the meaning of this error signal ? History Machine started running immediately door was closed before any programme selected filled with water and main was motor runs and circulates water Water is not heated and detergent door has not opened Machine will continue to circuluate water until turned off If reset used then


1 blink is machine is having major power supply problem.the power supply board needs replacement.\015\012-----------\015\0122 blink is CCU error.that control board problem.\015\012-----------------\015\0123 blink is the CT error.that is ... Dishwashers

This is the 2nd time I've had problems with my dish drawer. After I cleaned the filter and replaced it, I had standing water on the bottom of the drawer. The last time this happened, I had someone come to repair it - ended up it was me. I didn't put it together properly. This time I did the same thing I was told to do. I still have the standing water. What should I do. By the way, the coils are not kinked in the back either. Can you please give me some advice? Please respond to me at F


Unfortunately I have to respond to you through this post per policy of fixya.com. This s to ensure we have a visibility on the quality of the solution and also allow other consultants to help if necessary.\015\012\015\012Water standing a ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishwasher FDB4315LFC0 Error code ER uo Second time it has happened. First time, a repairman came and said I needed a new "vent assembly", but I asked if he could "un stick it," so he took it apart and fiddled with it, and it worked for about a month. Now the error code is back, and he warned that if it came back, I should have it replaced. I've only had this NEW machine 10 months -- this shouldn't happen, right? Any suggestions? Thanks.


Who's to say what should or shouldn't happen?Sounds like you need a new vent assembly. ... Frigidaire Dishwashers

Error 03 -"Wash pump not operating" and sometimes Error 12 "drain valve is running when it should be off". About one third of time runs normally. Other times only E03 or E 12 after E03 and restart attempts(pwr off/on). Pwr off 1 min before restart attemps. Last 45 uses eventually does run to finish. Local tech unable to replicate problem in one $100 service call.


... Electrolux Dishwashers

Dolphin Dishwasher DW 3210 --How to adjust the Rinse Aid timing ( 6 -- 13 ) secs . Step by step please. I know how to adjust the detergent timing but not the Rinse Aid, please help.


I have a korean user manual for that model.\015\012do you want me to give you the link? ... Dishwashers

I have the E3 error on my Smeg DWI614 dishwasher which would indicate a heater error, however it is heating the water in the bottom of the machine but it seems to time out. The main issue seems to be that the recirc. pump is not running during the heating phase. I have taken the pump out, checked the connections etc. twice now and everything seems fine (the motor runs when tested). When I have done this (both times) the dishwasher has started again and run for 20+ cycles fine, then the issue com


... Smeg DWI614 Built-in Dishwasher

No pressure,but some times have hi pressure, but just for a few seconds. The person before me had the machine without been used for long time now has this problem. only had pressure for 2 times than nothing again help me please. Thank's Astro


First if you have a filter where the water is coming into machine and if you have not already cleaned the filter clean it,but i'm sure you have already thought of that after that the pump may have a problem, most of the time it is cheaper to buy ano ... Honda Karcher G2400HH-R Pressure Washer

I have dishwasher kudko1ilbs6 and it will not start. I know there is a code to restart it because i've had this problem one other time. Will you please,please,please help me


Hello. Here is the code. Write it down and save it for future reference\015\012\015\012Thanks for using FixYa. To resolve this you will have to reset the console, press these buttons in sequen ... KitchenAid S-Series 24" Tall Tub Built-In Dishwasher - Stainless-Steel

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers

My dishwasher is brand new Model FDB1502RGS0. I used it for the first time today. It seemed to be cleaning for a very long time. It was up to 2 hours and I had to leave so I turned it off. How long should it take. That seems like an awfully long time. I kept waiting for the drying mode to start and it sounded like it kept filling up and emptying. Does this sound right? Please advise asap.


Most DW today take a minimum of 90 minutes. Run the hot water from the\015\012sink until it gets hot, then start the DW, this will shorted the first\015\012wash cycle. It is not uncommon for the DW to run 2hrs or more based\015\012upon the water temp ... Dishwashers

F4 error fisher & paykel nautilus dishwasher sometimes this error comes up and it seems to occur about 10 minutes from the end of the cycle. it doesn't happen all the time. the user guide does not specifically address this error code.


F4 is a heating error- dishwasher has not reached temperature in allocated time. If intermittent fault, problem is usually with electronic board, which has temperature sensor attached. Sometimes the wiring to the control board burns out and can give ... Fisher Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0968 seconds