Having problems with your Dishwashers ?

I have a GE Monagram dishwasher 1999 /- model ZBD 5900/5700 It is stuck on Heated Dry cycle. Would not drain for along time, than it finally drained but still stuck on Heated Dry. Turned breaker off and on several times did not help. Still stuck on Heated Dry no other buttons work


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a GE Monagram dishwasher 1999 /- model ZBD 5900/5700 It is stuck on Heated Dry cycle. Would not drain for along time, than it finally drained but still stuck on Heated Dry. Turned breaker off and on several times did not help. Still stuck on Heated Dry no other buttons work


... Dishwashers

We have a whirlpool quiet partner iii. It was working fine and was opened mid cycle. Then it wouldnt drain. Then all the lights started blinking. At some point it drained the water out. We flipped the breaker and now just the normal cycle light is flashing. Flipped breaker again that didnt work. Tried the reset code hi temp wash and heated dry. Normal light still blinking. Help please?


See this causes and fix it. God bles you\012 \012 \012 \012 \012 Check Fault Codes\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Dishwashers

I have a Frigidaire Ultra Quiet II dishwasher that gets stuck in the 6:00 position (between light wash and drying) during the cycle. It also gets stuck right before the drying cycle. It will proceed with the cycle if I manually move the dial. The heated drying feature is also not working as well. Do you have any suggestions? Thank you for you time, for it is appreciated. Best Regards, Scott G.


... Dishwashers

Kenmore Ultra Wash Model 665 - 158* Front panel not working properly. Pressing Normal does not light that option. The only option that lights is "Quick Rinse", pressing this lights that option and also the "No Heat Dry" light. After a few seconds the lock light comes on. Looks to me that the "No Dry Heat" button is stuck on, which causes all the other things to happen Is there a way to fix this?


... Dishwashers

Pdw 9200 jo3ww dishwasher- The start button doesn't work. The arrow keys work and the heated dry button works. I tried turning the power off for 30 seconds and it still doesn't work any ideas?


... GE PDW9200N Built-in Dishwasher

I have a Whirlpool DU1048 that started out with a blinking clean light. I reset the dishwasher by pressing the heated dry and normal buttons twice. That worked the clean light stopped blinking. The problem now is the dishwasher seem to be stuck in the wash cycle. I finally have to turn it off after over an hour washing. Is this possibly a heating element problem? is that user replaceable?


... Dishwashers

The 3 sec light is on and the other buttons wont work. Tried turning the breaker off. Didnt work. Still stuck...


Hold 3sec button and pressdrain off several times ... Maytag MDB7100AWB Dishwasher

Replaced circuit board on my kenmore 665.13742k603 dishwasher,still all wash buttons,and start button will do nothing.ran test using sani rinse and heated dry buttons all lights come on but washing light does not,all lights remain on after test,unplugged,plugged back in,,still no wash buttons or start buttons work,can you help?


... Dishwashers

I have a 2 year old Electrolux ESL 63010 dishwasher, and it worked perfect until a few days ago, when it did not wash cleanly and the dishes came out cold. I read a few forums and it seemed to indicate the heating element. So I ordered one a fitted it, but still the water is not getting hot, or drying the dishes after the complete cycle. I have done a visual check of the PCB board, which looks clean and good. No error sounds, and it completes all programs, but with cold water and no drying. W


... Electrolux Dishwashers

I have a GE dishwasher with front control panel and at first the wash and dry lights stayed on and it was beeping every 30 sec. when I turned the breaker off for the required 30 sec. the lights started flashing and it is still beeping. The control panel seems to be frozen as it is not working and wont do anything.. everything was working fine before this. I bought it at Home Depot on 3/14/07 and had it installed by a licened electricion. Help


Call ge @ 800-386-1215 for service ... Dishwashers

Whirlpool gu2400xtpt3 Green light flashes, doesn't run, how can I repair this myself? "Normal" light keeps blinking; tripping breaker didn't work; all the "sequencing" suggestions (hi temp, heated dry, etc) didn't work. I'm at my wits end. Any ideas? I have a Whirlpool GU258xtpq3


... Whirlpool GU2400XTP Built-in Dishwasher

Lock wont turn off . i hold the heated dry button for more than 3 seconds and it still wont turn off. tried resetting with breaker swicth No luck


I would be more likely to believe that it is the locking solenoid.You say the light is faint, which leads me to believe that there is a high amperage draw from this locking mechanism. Remember, the locking solenoid should definitely affte ... Dishwashers

I opened the door before the drying cycle finished. I pressed the cancel button, then I pressed "normal wash" and the "start" button and it didn;t start. Then did "cancel" again . I pressed the "heat" button for five seconds to lock the door so I wouldn;t make the same mistake again. It still won't start. Now the "cancel" button won't work and the start button flashes. What do I do now?


HI. The unit will need to be reset. This is achieved by unplugging the unit for five minutes. If unplugging is not an option, simply,shut down the appropriate circuit breaker for five minutes. This action will, essentially, reset the logic sector. On ... Dishwashers

Maytag MDBH985AWS...control panel button to turn on the washer does not work...wash cycle and delay lights will light when pushed but washer will not come on. Have tried pushing normal wash and heated dry in sequence, flipped circuit breaker, open and close door, pushed buttons while door is closed


... Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher

I have a Frigidaire FDBB944CSO, It was working fine but one day the power went off and when the power came back on it just started flashing Hi Temp Wash and Dry Heat Off. I tried resetting it but still the same thing.


... Frigidaire 24 in. FDBB944C Built-in Dishwasher

Hello my Kenmore Elite dishwasher has both the "add a dish" and "drying" red lights stuck on at all times. The machine still works but I want to get these lights to go off!


... Dishwashers

Sometimes I can run the dishwasher with no problems. Sometimes i will run it and leave the house and come back 5/6 hours later and it is still running on the wash cycle but it is only putting out heat and no water. So its drying up the soap on the dishes and not really washing anything, and it get stuck on that cycle


... Magic Chef 24 in. DU4500 Built-in Dishwasher

My kitchenaid dishwasher model kudpo2frsso built in lights are flashing normal and cancel I shut off the breaker for 20 minutes pressed Normal heat dry X2 Then cancel x2 but to no avail. Any suggestions its the day before Thanksgiving HelpI T The Normal and Cancel lights are flashing simutanuously and the dishwasher is not working at all


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Heated drying does not work;after rinse cycledishes are still cold.


Hi.There are parts that must be tested.Check heating element for continuity. Same on high limit thermostat located near to the element. Test fan by energizing.Test the dryness sensor by jumping it.The tests a ... LG 24 in. LDS 5811 Built-in Dishwasher

My son opened the washer before it completed the full washing cycle. Now it won't start at all. We checked the switches, gfi, circuit breakers. Is there a reset button somewhere? I pushed and held the Heated Dry Button for 4 seconds. Nothing works.


HI- You didn't give a model # but it is possible that the fuse on the control board burnt out. This shuts the unit down if it gets blown. Yours may not have this fuse, can't tell without a model number but if you are sure it is getting power I'd h ... Kenmore Dishwashers

I have a Maytag MDB5601AWB dishwasher. all the switches except the heated dry switch are not working. I did the unlock thing and still nothing . Do I need to replace the switch panel or is there something I should try? I tested for power and have 120 volts coming into the circut board and through the door switch Comments: Aug 22, 2009 - I tested the door swich and I have power on both poles when it is closed. there is 2 switches on the latch but the one with power to it powers up the circ


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a Maytag MDB5601AWB dishwasher. all the switches except the heated dry switch are not working. I did the unlock thing and still nothing . Do I need to replace the switch panel or is there something I should try? I tested for power and have 120 volts coming into the circut board and through the door switch


Possible switch panel. When you press it does it feel like a click as the the other buttons? If so you probably have a bad circuit on the inside, if it doesn't click the heated button switch is more then likely the cause. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have the sears 665.17772. It is stuck at Lock On. I followed the manual to unlock, holding the No Heat Dry for 4 seconds. It will not unlock. tried to unplug and plug in and no change, still locked. can you help?


... Kenmore Dishwashers

My kitchenaid dishwasher quit working, the hi temp scrub and heat dry buttons light up but nothing else does. The dishwasher makes no sounds and doesn't even try to turn on so I tried bypassing the thermal fuse, safety latch, and replaced the motherboard so to speak and still nothing so PLEASE HELP!?!


... Dishwashers

Hi, we have a GE dishwasher model GLD4260l00ss. The heated dry light stays on, and the panel will not respond. I have tried to reset by turning off the breaker, but that doesn't work. Any suggestions? Thanks!


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1460 seconds