Having problems with your Dishwashers ?

Kenmore 74362 My model# is 665.74362400 this unit is only just over one year old. My problem is it shut down and the quick rinse light started blinking. I have tried some of the button-reset procedures that were on some other responses but to no avell I even left it unplugged for a while. Any impute would be appreciated. I have a Kenmore Dishwasher Model #74362. After we run a cycle for a normal wash and heated dry the dishes are all very dirty and greasy. It is as if they were never washed. Th


Answers :

I had the same issue and you will never beleive the solution.
\015\012Steps to follow:
\015\0121) run one full cycle with no dishes or soap
\015\0122) run one full cycle with a dishwasher cleaner like Jetdry
\015\0123) run one full cycle with a gallon of white vinager
\015\0124) never put soap in the extra in and only fill the main soap bin half way.
\015\012
\015\012should work fine from here on out, but never fill main bin more then half way when you do dishes. also run the hot water in the sink until the water is very hot before starting the dish washer.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore 74362 My model# is 665.74362400 this unit is only just over one year old. My problem is it shut down and the quick rinse light started blinking. I have tried some of the button-reset procedures that were on some other responses but to no avell I even left it unplugged for a while. Any impute would be appreciated. I have a Kenmore Dishwasher Model #74362. After we run a cycle for a normal wash and heated dry the dishes are all very dirty and greasy. It is as if they were never washed. Th


I had the same issue and you will never beleive the solution.\015\012Steps to follow:\015\0121) run one full cycle with no dishes or soap\015\0122) run one full cycle with a dishwasher cleaner like Jetdry\015\0123) run one ful ... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

My dishwasher so my dishwasher seemed to have quitworking during a cycle. like breaker triped or something. i checked the breaker and thats fine. it seams like its hard wired in though. Would that be right? and is there a fuse or something that could/would blow during a wash? I dont know what model it is or anything it was in the house when i got it. The dishwasher is built in and it seems decently old its a kenmore ultra wash and it has like 10 buttons for the differend cycles on the left and a


Sounds like the fuse on the control blew. you can replace the fuse for\015\012around $20 or you can cut and splice the wires for free. If that doesnt\015\012work then you may have a loose conection in your junction box under the\015\012dishwasher. ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a not quite 2 year old Kenmore dishwasher model #665.1322.(I believe built by Whirlpool) The motor has burnt out. That seems ridiculous to me when there is just my husband & I using it and I've had dishwashers in the past that have lasted 10 - 15 years. Anyways - we have no warranty so we thought we would try to replace th motor - but I can't find anything online. We live in south western Ontario - any suggestions of where we could find a replacement motor?


I have recently had the same problem with the same model. Do you think there's a connection? I'm going to report this to Consumer Reports. ... Kenmore Dishwashers

I have a one year old Kenmore Dishwasher model # 587.15100981 that will not spin, water will fill and empty but will not cycle or spin the arms. I cannot find any obstruction in tube, or anything in the arms, they both will spin easily. I have ran the dishwasher with nothing in it, and it does the exact same thing, would I be better off financially buying a new one, or repairing the pump?


... Kenmore 24 in. 17483 Built-in Dishwasher

I have a Kenmore dishwasher, model 665.16039. Over the past month (we were on vacation 8 days over Xmas, but I assume it would have happened then, too) it has required rebooting using the Normal Wash - Heated Dry reset about 4-6 times. It would then do a couple loads okay, then need resetting. Now, however, it's refusing to reset to a point at which the Start buton will work. When I reset it, it flashes all the lights (incl. Start), and it fills, sprays, empties, etc. just as though it works


Make sure there is no water damage. ... Kenmore 24 in. 16039 Built-in Dishwasher

Just purchased a kenmore dishwasher model 665 13152K701, Serial # FU 5002219. There is water in the bottom of the dishwasher at the end of athe cycle. What would cause this and how do I correct it?


... Kenmore 24 in. 15689 Built-in Dishwasher

Dishwasher Model Kenmore # 665 16829000 Dishwasher "Quick Rinse" was blinking and no other buttons would work. Received FixYa solution below: "Check out the console assembly. take off the inside cover and the plastic over the electronics, just remove the two screws holding down the circuit board, pull it to the side, then blow plenty of air through the two holes on either side. The holes that you need to blow air into are not on the circuit board, but on the plastic underneath the circuit boar


Hi\015\012If the control board detects that a key is stuck in the depressed position, the dishwasher operation will be suspended and the control will flash the light for that key until the condition corrected. If a key without a light is ... Dishwashers

All of a sudden, my Kenmore dishwasher (Model 363.1411691) will not cycle. When I lock it shut and try to set it to wash, all I hear is a click--no motor running, no water sounds. As I advance the timer knob, I just get clicks where each cycle should begin. There is standing water in the bottom of the dishwasher which does not drain out. Any advice would be much appreciated, for sure.


Hi.The clicks are simply the relays in the timer board that try switching on. The control module is likely working.The cycle does not start because of a different problem.If no light is coming on, then ensure that wall socket ... Dishwashers

We have a Model 587.1440*, 587.1441* Kenmore dishwasher. I had turned the water off to the whole house when we left for vacation and openned one faucet so the water pressure would be off the house while we were gone. Upon our return, I turned the water back on but the dishwasher gets no water. ?? What happened? It was working fine when we left, now no water. ?/


First, have you run it long enough to purge the air from the dishwasher line?\015\012\015\012Secondly, the solenoid valve for the water inlet may be stuck due to no pressure on it while you were gone. Tapping it with something light like ... Dishwashers

What's your problMy portable Kenmore dishwasher (model # 665.17742K010) will not stay attached to the faucet. The pressure of the water (even when turned on slowly) will pop it off. Any help would


... Kenmore 24" Portable Dishwasher 1774

I have a Kenmore dishwasher that seems to leave a bit of water inside. Model 3631435598. Is this normal finish mode? Seem the water would get stale. I have no manual can anyone help with either ?


Hi Doc! You know? If I had to postulate an educated guess, I'd wager that your dishwasher's (DW) drain hose isn't hooked up properly under the sink. When it's not hooked up right, water from the sink will siphon down into the DW making yo ... Kenmore 15762 Dishwasher

I have a Kenmore dishwasher model #665.13842K601. The problem that it has is that it does not seem to be pumping the water around the tub after it fills. It will fill and drain fine but will not wash. I have removed the spray arms and checked all the parts that I can get to from the inside but fear that it may be a pump or jammed impeller. it does make a faint buzzing sound when it should be operating. Any input would be great. Thanks, Matt


It sounds like you have a circulation problem which means that the circulation pump has gone bad. \015\012Circulation pump - http://www.appl ... Kenmore Dishwashers

I have a Kenmore Ultra Wash Dishwasher model 665.1312 and it suddenly stopped draining. After cleaning out the 2 filters, I noticed that there are some drainage but it still has a good inch of water at the bottom. What would be the next step? The hose do not have any kinks in it.


... Kenmore Dishwashers

I have a kenmore dishwasher model 66516382300 it would stay on wash cycle and not come off, appliance parts told me to put a new electronic controller on it, I did and the little green light comes on it will blink seven times and hesitate and do this over and over. What can I do.


... Kenmore Dishwashers

My Kenmore Ultra Wash Dishwasher model 17731 stopped working mid wash I checked the power cord and it is fine but the unit doesn't seem to be getting power. Is there a fuse in this thing? Any advice would be welcome.


... Kenmore Dishwashers

We just bought a house that has a Kenmore diswasher model# 587.15173400. I started a load of dishes and the dishwasher ran for 1 1/2 hours. It stayed on the wash cycle and the sensing light would come on occasionally. I am not sure what is going on. Any suggestions?


... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

Our kenmore dishwasher... 8yrs old.least expensive model stopped draining. Husband tried fixing it and couldnt. Before we paid a repair man 75.00 dollars just to look at it...I shopped on craigslist. A lady was selling a ''6yr old kitchenaid'', that she said she paid 800.00 for and would sell to me for 100.00. She was just ''upgrading all her appliances''. Anyway...I bought it...thought Id rather put 100.00 into an 800.00 dollar kitchenaid as oppose to mine. I ran it last night for the first tim


Only if you choose to think so. I have seen old equipment in better shape that much younger vintage stuff! It depends on how much use it has had and if it has been run to the max with heavy loads to the point of making the machine beat itself up pre ... Dishwashers

I have a Kenmore Type 575-0 Dishwasher, model number 665.16033401, Style 16033. It runs trough the cycle, once the cycle is complete the clean mode light is on but most dishes are still dirty. I had someone here to repair this about a year ago. All he did was press alternating two buttons, which I have tried, it resets and lets you start a new cycle. However, the problem remains. Last time there was only button pressing involved, no need to replace anything. So, I would hate to have to pay ag


You need an electronic control and heating element ... Dishwashers

I would like to get a Whirlpool repair manual for my Kenmore (Whirlpool) dishwasher model: 665.13742K601


... Kenmore Dishwashers

I have a Kenmore Ultra wash dishwasher model # 665.13692K600. It was working fine one day then all of a sudden I have nothing. No lights no nothing. I have tried shutting the breaker off and it didn't work. It is only two years old, if you have any idea that would be great. Thanks!!


You probably blew your thermal fuse that is attache to the main circut board, you can buy the thermal fuse seperatly. it is located in the console. ... Dishwashers

I have a kenmore elite ultra wash he (model 665.1315) dishwasher - one year old. No problems until recently. It just started leaving a substantial film on the dishes, cutlery and racks in the past 10 days. Rinse aid is full and have changed detergents to see if this would make a difference. Filming is just getting worse.


... Kenmore Dishwashers

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at ... Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

I have a kenmore dishwasher model # 665.13722k601. I am leaving this resident for the winter and would like to know how to winterize it. I get down to about 10 to 18 degrees in the winter


... Kenmore 24 in. 15689 Built-in Dishwasher

My kenmore dishwasher model 587.1521 has been stalling more often. It will not start any cycle at all. After messing around with it for a few minutes I have gotten it to work but I would like to avoid this problem completely.


... Kenmore 15872 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2102 seconds