Having problems with your Dishwashers ?

Need to know how to re-set the anti-flood device

\015 Hi, We have a AEG OKO Favorit 6040 dishwasher. We had a small blockage in our kitchen sink this week. The drain pipe for the dishwasher is connected to this drainage system. I think the dishwasher Anti-flood device has kicked in which is good as we have n't suffered any flooding. We have cleared the blockage but I am not sure how to reset the floater switch. Unfortunately I am living in rural France so I need to resolve the problem myself.Many Thanks for your assistance.Steve\015

Answers :

I managed to clean the filter inside the dishwasher and drain a little residual water. I then re-plugged in the appliance and the anti-flood device seemed to reset and I have n't had any problems since.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to know how to re-set the anti-flood device


I managed to clean the filter inside the dishwasher and drain a little residual water. I then re-plugged in the appliance and the anti-flood device seemed to reset and I have n't had any problems since. ... Dishwashers

Hi, I have Dishlex DX 301 and it comes up with fault code 30 several seconds after starting. The manual says The anti flood device operates and to contact Customer care centre. I know something needs cleaning somewhere but where? I am handy with tools!


Hi,\015\012 \015\012Error code 30 means flood switch in base has activated due to water on lower tray. Find out where the water is leaking from, repair the leak. Dry off the lower tray & fault code will ... Dishwashers

I have a John Lewis dishwasher (JLBIDW901). Today it would not begin wash cycle and displayed the fault code i30. The manual states that this means the Anti-flood device is activated. I know the sup


... Dishwashers

Correct connection of anti flood device on John Lewis washer dryer


... Dishwashers

Anti flood device needing reset - Zanussi Dishwashers


Worked! Thanks so much. Had a small leak in waste pipe at base. When leaned machine forward a load of dirty water came out. Now working fine but will have to get pipe replaced asap I guess? Cheers for all the help. ... Zanussi Dishwashers

Reset anti flood device


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Resetting Zanussi Anti Flood Device without removing built-in dishwasher


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Hi can you help me please I have a Zanussi DX6453 dishwasher which has stopped working. Having used the diagnostic facility it has come up with anti flood device, I have done the usual rocking the machine back and forth no sign of water. I have taken the machine apart and looked at the anti flood switch and this is bone dry and by lifting the float you can hear the switch clicking on and off. When I reassemble the fault is still there I'm begining to think the switch is faulty but not sure, do


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

I have an old Bauknecht dishwasher GSF 3160 S that a friend gave us 10 years ago. It was stored for that time, and now if I try to use it, it leaks out through the bottom and floods the kitchen. I would like to know 1) is it worth fixing from the point of view of how energy/water efficient (or inefficient) an old dishwasher is - if you know the specs for this particular machine, and 2) what needs to be changed if it is worthwhile fixing. I don't know what else might not work, because I only pu


... Bauknecht Dishwashers

Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.


Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activ ... Dishwashers

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in

Anti flood device is activated


... Electrolux Dishwashers

I have a zanussi ZSF2440 dishwasher, when it turned on by the power button on the front you can choose a cycle and start it, Once the cycle is started it fills up with water but doesn't stop until it over flows setting off the flood protection, which cuts the power, so all the lights on the display go off and stops the water flow and drains the dishwasher and keeps draining the dish washer while the flood protection is on. It seems as if the dishwasher doesn't know when its reached its correct


... Zanussi Dishwashers

Have ge model 268/760 need to know the right settings to set it on


The right settings depend on the capacity of your softener and the hardness of your water before softening. If you know these, then you can program your softener with the right values. If you do not have a manual for the 268/760 you can download one ... House Brand Aqua-Pure AP102T Whole House Water Filter System

Hi i have a technik dishwasher it has flooded the kitchen, i managed to get all of the water out of the machine but now the pump seems to be running all of the time, someone has told me there is a flood switch on the wachine that will need re-setting but i can not find it can you please help me please either email me or ring me on 07875666327 uk number. many thanks chris


Drain pump is running all time because there is water in bottom tray. tilt machine back to 45deg and water will flow out. otherwise, take front panel off and mop water out. alll that is required to reset flood switch is to get rid of the water ... Tecnik Dishwashers

Blanco BFDW6 dishwasher drains and sounds like it is going to start but stops after 2-3 seconds. Yesterday it was playing up and made a fairly small puddle on the floor. Electrics seem to have been a problem from early on as after a few months it would let me open it during the beginning of the cycle to add items without needing to restart program. I am not sure if problem is electric (may need a reset?) or due to anti-flood feature.


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Reset anti flood device in dishwasher Beko DWD 4310 S


**** the water out of the pan below the dishwasher, there is a float in the pan if you have a leak and the pan fills with water ... Dishwashers

I need to know how to set the Bosch SGS43E02ZA dishwasher on it shortest cycle


... Dishwashers

I have a Bosch dishwasher (SHE46C06UC/46) and this is the third time it has plugged up and flooded my floor. I don't clean the dishes before putting them into the washer, but I don't load it up with big garbage either. I need to know how to figure out where the clog is and fix it. I can't easily remove the washer from the cabinet.


... Bosch Dishwashers

Purchased a Bosch SMU50E15AU dishwasher and think the water hose may be too short as the washer needs to be installed in the corner rather than directly next to the sink - read that due to the anti flooding valve may not be possible to extend.. Any other solution?? Please help/advice Rgards


You will have to add drain hose to this type install . do not use a smaller size. 5/8 in ok and no sharp bends . ribed drain hose is good . whirlpool ext hose kit is a good one to use . this should not cause any problems. mm ... Dishwashers

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

I need english instructions for my spanish bosch dishwasher SGS44E28EU/05 to know how to add salt and how to set the water hardness on the dishwasher. The product number I have selected from the website isnt the right one, but I assume they will all work in a similar way?


There is a site that is call thermador .com you can get bosch, thermador, gaggenau parts here . it is the same company. let me know if this works by sending me a 4thumbs up post. thanks ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Aeg 40860 dishwasher Anti-flood device is activated.


... Electrolux Dishwashers

Cycles Can't find manual, need to know what the normal cycle does, both racks, pots & pans. What is the best setting for full load.


Normal cycle is the best load for normal loads you should be able to go to frigigdaire.com and print a manual ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

I need to Know how to re-set my dishwasher? I have a Beko Easycare D3422FW


Hello antheafrankl, I am not familiar with this model of dishwasher, but did you try unplugging it for 10 seconds? On some models one can press and hold the on/off switch, press and hold the program select button. or somtimes there is a combination o ... Beko 24 in. D3421F Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0686 seconds