Having problems with your Pressure Washers ?

High pressure hose connection blew up. Fix? or buy new?

\015 Got a Black&Decker PW1600 13 amp electric power washer. The high pressure hose connection blew up. Any way to fix it without buying a new hose?\015

Answers :

Yes take it to napa auto parts and they can cut and attach a new end which are for hydraulics. They are crimped on and meant to hold very very high pressure. I used to use a pressure washer everyday for a living and it was a tractor rental/repair shop and we used the hydraulic fitting machine on the power washer hose all the time so rest assured.
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

High pressure hose connection blew up. Fix? or buy new?


Yes take it to napa auto parts and they can cut and attach a new end which are for hydraulics. They are crimped on and meant to hold very very high pressure. I used to use a pressure washer everyday for a living and it was a tractor rental/repair sho ... Pressure Washers

I bought a new karcher model no. K3.690 Thurs. Apr. 8th 2010, I tried to start it today Sun. Apr. 11th, when connecting my high pressure hose, to the trigger assembly, it does not lock in, I followed the proper instructions as per the quick start.


... Alfred Karcher K 5.93 M Electric Pressure Washer

I have burred the outlet pipe thread so I cannot fit pressure hose. Can I buy a new connection?


... Pressure Washers

DuraBuilt 1404. Motor kicks in for two seconds, then quits. High pressure hose blew off and I could barely get it threaded back on. Quick coupler broke so I hooked garden hose up direct. Is lack of quick coupler maybe the problem? Could I be missing a part on high pressure hose that makes it so difficult to thread onto male fitting? Thanks! Bob


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have an Excell 2500 psi with Briggs & Stratton 6.5 HP engine that starts, builds pressure and maintains high pressure as long as the hose is not connected. But as as soon as I connect the hose, it loses all pressure. Is it the pump?


... Pressure Washers

Unable to connect high pressure hose to gun base on Karcher 3.99M


You probably need to slide the rubber sheath back a quarter inch or so so that the "C" clip slips between the rubber and the wide part of the brass connector. That is what I had to do. ... Karcher Pressure Washers

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

Hi, I have a Karcher 3.75 jubilee powerwasher, there is water coming out from where the high pressure hose connects to the machine and the unit pulses when idling but works perfectly without drop in water pressure, when trigger on gun is pulled, on closer examination the metal connection on the hose turns, is this the problem or something else. thank you.


... Karcher Pressure Washers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

My Durabuilt power washer model #D81404 blew apart where the hose connects to the gun. I think I just need the copper fitting that connects the gun to pressure hose. Can you help me?


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Karcher k3.575 high pressure quick connect high pressure hose not locking


Clean out the dirt and check the hose support that likes to slides down to the end of the hose ... Karcher K3.68MR Electric Pressure Washer

I have a Coleman pressure washer model APW-VB-1400A, 1500psi and need a new high pressure hose. Where can I find one?


... Coleman Pressure Washers

I have burred thethread on the connection to the pressure hose of my pressure cleaner. Can I buy a replacement part?


... Pressure Washers

Soap feed The soap feed hose on my Karcher 2650 does not suck up the soap into the washer. I pulled off the connector piece that the hose is connected to. I can blow through the hose. There is a little metal finger thing that you can tell pushes up into place when the water pressure is high. It seems like it is supposed to drop down and allow some soap through when the water is running. I found a loose(attached to nothing) gasket, looks like a little donut. It was just free floating in t


I fixed mine works good too, watch my video step by step i put it on youtube ... Karcher G2650HHR Gas Pressure Washer

No pressure I have a husky 1750, With all connections clear of any obstructions the pressure washer turns on sounds normal, but when you pull the trigger there is no way near enough pressure to do anything..The gun and H/p hose is brand new..Any ideas?


It is probably air locked....Here's what you need to do. Connect the garden hose, and HP hose, but not the gun. Turn on the water, and let it run while you make sure that there are no high points in the garden hose that can trap air....Work the hos ... Pressure Washers

My Karcher high pressure cleaner K 2.180 is not working. When connected to power and water there is water coming out of the lance but it is similar to the pressure of a garden hose and there is NO noi


... Karcher Pressure Washers

I have a JD 3300 psi 1150 Briggs n Stratton pw. It is leaking from the oil cap/ dipstick seemingly from high pressure. The cap dipstick is about 10 inches long, so this is a real squirt goin on. There is no rubber oring or gasket in the cap. I bought it from a pawn shop new, or at least seemed new as the hose and tips were still factory wrapped. Any ideas?


Either there is compression from cylinder getting into crankcase pushing the oil out or the oil level is too high. ... Briggs & Stratton Pressure Washers

I have a hole in the water hose to my pressure washer. Can I fix it or do I have to buy a new pressure washer? Loraine


... Pressure Washers

I have a new GE Tall Tube built in - CleanSteel dishwasher, I have tried to turn it on and water ends up on the floor, I have taken off the panel and found a black hose thats causing the problem. I have no idea were the lose end connects up to an I know its a pressure hose...Help Please ?


... GE 24" Tall Tub Built-In Dishwasher - Stainless-Steel

I have a maytag portable dishwasher purchase it 14 months ago, the hose that attaches to the faucet leaks and wont stay connected, is it worth buying a new hose?


You need to replace the faucet adapter ... Maytag MDC4650AWB 24 in Builtin Dishwasher

I have a Husky pressure washer with a Honda 2600psi engine. Problem is, no water will come from the pressure hose. I connected the water w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help.


Check the quick disconnect to the wand these are spring operated and can get stuck ... Pressure Washers

High pressure hose. How do you get if off the karcher k 3.99


Hi, you have a little black clip in the gun hand where the hose pushes in, just pull it out and the the hose will pullout. ... Karcher K 5.85 M Electric Pressure Washer

Bad i bought the 1800 psi washer 2 years ago the head on the hose blew off you sent me a new hose it did the same thing. you sent me anouther hose and it blew off too. finaliy you sent me a hole new washer because of a recall. i didnt get to use the first one all year and now i was going to use the new one the other day 3-28-09 and it is the same washer i had and the head blew off so now i have two washers with no hose, that i can not use. so what do i do now ?


... McCulloch FHH18A Electric Pressure Washer

My high pressure 2400 psi hose blew out.


Hi cwsales:Sorry, the pressure will be too much for a your mend to work. You will just get wet. A professional hose repair shop is your best bet, or a new hose. ... Campbell Hausfeld Pressure Washers

Problems connecting the high pressure hose to wand


You need to pull back on the outer collar push into place then release the outer collor ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1137 seconds