Having problems with your Pressure Washers ?

As above. turned three pieces m/steel rod 100mm not using tailstock,turned to 25.44 tail end, head stock end 25.20, using auto feed, any ideas what i should do to eliminate the run out? any help apreciated.


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

As above. turned three pieces m/steel rod 100mm not using tailstock,turned to 25.44 tail end, head stock end 25.20, using auto feed, any ideas what i should do to eliminate the run out? any help apreciated.


... Pressure Washers

My dishwasher is SHU 3000 series and over 10 years old. The problem is SUDS that will not go away. I have used on-line methods such as vinegar. I have gone through 6 bottles of "Dishwasher Magic" and have put it through cycles not using soap over 30 times and am still getting suds even at the end of the rinse cycle. I have called a local repairman and he says he cannot help me..that I should continue running the dishwasher time after time till the water is w/o suds. Any help for me?


... Bosch Dishwashers

In recent weeks the dishwasher has been leaving residue at the end of the cycle. We use 65 degrees cycle. We use finish and have recently used finish cleaning to help situation with no success


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

Hi. I'm scratch building a pressure washer using a Comet BXD2831G pump. If I don't plan on using any type of detergent, is it OK (or manditory) to plug the detergent intake to keep it from sucking air? I would use a short piece of hose over the intake with a screw in the opposite end. Also, is it possible to set the pressure by ear? If so, what should I listen for? Thanks for your help!


No need to plug the injector because under pressure (internal force/pressure) keeps valve shut. It only opens when large nozzle (black tip) is used lowering internal pressure causing siphon effect. Some chemical injectors have a thumbwheel ... Comet GXD2527G Pressure Washer Pump

Gritty dishes My dishes are coming out of the wash gritty. It is as if food has been dried on them. As if the rinse water has particles in it and then they are left on every dish. I have used a dishwasher cleaner several times and I also use the rinse agent in the machine. Nothing is helping. It is getting worse.The inside of the dishwasher. mostly on the top, usually has food residue all over it at the end of every wash. Even the machine is dirty. I'm hand washing everything right now. Any


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Maytag dishwasher #33323190JG Many of the dishes come out with a white-ish coating. I usually end up using an SOS pad to scrub it off. Three weeks ago a repair man replaced the heating element due to the recall but that didn't help it. He suggested trying "Dishwasher Magic." I've used Dishwasher Magic a couple of times within the last two weeks but the problem remains


Hi,\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... \012Bought new spray arms online and installed them in minut ... Maytag Dishwashers

Got a new Kenmore dish washer in mid January. Worked fine for a couple of weeks then so-called "clean" dishes were covered with a residue from, I assume, was the dishwasher soap. I tried cascade action pacs, then cascade powder and finally, cascade gel. Nothing helped. I ended up having to use SOS pads to get the "crud" off of the dishes and silverware, and use regular dish soap to hand clean each dish and saucer and bowl...as well as each knive, spoon and fork! I have finally stopped u


Hi \015\012 \015\012Add some vinegar to each load along with the detergent you are using, also stop heat drying your dishes. Never use liquid or gel detergent .Dishwashers have some delicate parts a ... Dishwashers

I have a pressure washer with a faip 3 piston pump. the other day i was using it and it stopped unloading. i cleaned the unloader and it didn't help. I bought a new one and it still won't work. I e-mailed Ryobi and they will not respond. There were no instructions on installing and adjusting the unloader. Could you give me an idea how to install and set up the new unloader. Any help would be most appreciated.


I think your main problem is that the unloader valve needs to be lubricated. Use the very best water resistant bearing grease you can find. If you can e-mail me a pic of your unloader assembly I can try to explain how to set it up. [email protected] ... Honda Pressure Washers

My Bosch SHU9925UC dishwasher will not stop cycling and come to an end. I also noticed that a couple of weeks ago it stopped beeping to signal the end of the wash. Can anyone help me please? Thanks for any ideas.


Go check this link it will help you http://www.applianceaid.com/boschDW.html#run\015\012\015\012Hope that helps......... ... Dishwashers

I have a maytag dishwasher (model # dwu491oaax - not sure if the 4th lettr from end is a "zero" or letter). It has never been a problem before, but hadn't been used in awhile. The light in the front is not on, and when I close the door and turn the knob, it makes the same "clicking" noise it used to, but the machine does not come on. Any ideas? is there a reset button somewhere?


... Maytag Dishwashers

I borrowed my neighbor's Karcher Model G 2650 OH (it's several years old). It had the yellow tip already on, but after awhile, I took the tip off to use a different tip,and pulled down the brass coupling at the end of the wand to insert the new tip. The problem is that the brass coupling at the end of the wand won't snap into place around the tip -- so I tried another, and another. No luck. And now the original tip that was on the wand won't snap back into place. HELP! I need to get my neighbor


... Karcher Pressure Washers

Draining problem Water left in dishwasher after end of cycle. Have a disposer, don't have a drain air gap that I can see. Tried to do a cancel/drain, showed 2 minutes ended and water still there. Disposal works fine. What is really interesting is that there is only two of us and at most we've only used the dishwasher thirty times since we had it. Of course- service plan ran out last year (July 07) Please help me. My name is Donna


There is a flapper in the drain hose just where the hose attaches to the pump assembly it has been know to get dislodged and cause a partial drain. With towels underneath hose remove drain hose and stick you finger in and see if it is free moving. ... Kenmore 24 in. 16539 Built-in Dishwasher

I can not get the water to drain during a normal wash cyclr. When I press the start/restart button twice it makes noise but no water comes out the end of the drain hose. I have put a shop vac on the end of the hose and can get water out that way but it appears not to be pumping. The washer sits for up to 6 months at a time without being used. Thanks for any help Ted Berry Placencia, Belize Central America


Teddy,\015\012\015\012Buy a new one...then go fishin!\015\012\015\012Richard Vantine (ret'd Colonel...USAF) \015\012Bingelrade, The Netherlands ... GE GSD5310D Dishwasher

My 450 pro Viking dishwasher (only a couple of months in use!)has both lights of normal wash and light china on, as well as the power light on. I cannot cancel program or start. It goes nowhere. Can someone please help me? I have 5 young kids at home and this is my idea of a nightmare! HELP!!!! Thank you VERY much Alma


\015\012Ok so your dishwasher won't do anything... it justs sits there and "Hums" you can't make it respond to any controls, and the ONLY way to Stop it. is to unplug the unit, replugging back in it simply "Hums" again and will do nothing. ... Viking Dishwashers

I have a new GE Tall Tube built in - CleanSteel dishwasher, I have tried to turn it on and water ends up on the floor, I have taken off the panel and found a black hose thats causing the problem. I have no idea were the lose end connects up to an I know its a pressure hose...Help Please ?


... GE 24" Tall Tub Built-In Dishwasher - Stainless-Steel

I have a Bosch Logixx Auto Option diswasher, about 5 years old, we have no user manual as we inherited it. It completes a cycle - nearly - it stays on '1 minute remaining' without turning off. I reset it using the indicated buttons on the panel but now it is confused when I select a progam and the remaining time sticks and/or jumps around. Is this fixable, or is it near the end of it's useful life?


... Dishwashers

I have a DPH3800 Dewalt pressure washer and the soaper isn't working properly. Right tip is being used but when trigger is not pressed it puts water into the bucket. When trigger is pressed it does **** some solution into the hose but very little and very slow. The valve is opened all the way. I know my former partner used bleach in the system which I read in the manual is a no no but it did work at the end of last season. Any ideas?


How is the pump connected on a john deere 3800 psi. i took out the 4 bolts and drained the oil. pump is stuck to cam. how does it come off? ... Dewalt 3800 PSI Pressure Washer

The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!


If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers

New - 3 months 665.1389 Kenmore dishwasher worked fine until today. end of cycle - water in bottom no directions in use guide how to clean drain or ?? No large items have been allowed on the dishes. don't have any helps in the guide about repair


... Dishwashers

The dishwasher is not washing. There is grainy residue on everything...even the wine glasses which had no food residue when they were put in the dishwasher, but are filthy at the end of the cycle. There is a bit of soap powder left in the soap powder container. I use Cascade powder detergent and Jet Dry . Thanks for your help.


Either it is not filling up enough or the wash pump is not working. ... Dishwashers

Dishes in the upper rack no longer get cleaned. I've been using this dishwasher since 2004 (purchased new), and have not changed the way I loaded the dishes or the detergent. I called the Kitchen Aid help line, and the rep simply read the owner's manual to me (e.g., stand a glass of vinegar in the dishwasher and run a cycle), which did not address the problem. Any idea what I need to do? Thank you!


It may be full of crud under screen. Remove lower spray arm, tower up to top, covers and you will see where the entrance to the impeller is full of stuff. ... KitchenAid Dishwashers

MyWhirlpool model number DU920PFGG2, serial number FJ3453664 is leaving a white chalky film on my dishes. The rinse cycle sounds like it should be working but it isn't rinsing well. We are also using jet dry but that isn't helping. Any ideas? Thanks


... Dishwashers

Re: Bosch Dishwasher Model SHX46B06UC/14 (year 2003) Good afternoon, I have water dripping into my dishwasher when it is not in use, approximately up to 1/2 inch over a few hours. The water collects at the bottom inside the dishwasher. I have to shut off the dishwasher water supply so that it does not overflow. Other than that, the dishwasher works perfect! Any idea as to what has to be replaced? Can I do it myself or do I have to call a technician. Thanks very much for your help.


HI. This type of issue will be the result of mechanical failure. This failure will be within the inlet assembly. Debris may be keeping the solenoid valve from closing correctly, thus, producing the steady drip a ... Dishwashers

I use tablet detergent for the dishwasher for last 4-5 yrs. with no problem. Today, 3 times in a row, at the end of the cycle, I opened the dishwasher and note that the tablet is only half dissolved? why? Please help. Thanks.


... Bosch Dishwashers

I have a HD 2701 DR pressure washer that starts and runs fine and usually works fine the "first" time but if you let go of the trigger and then try to use it again you just get a trickle out of the end of the wand. Usually if you hold the thing open for a while it will kick in (sometimes it takes forever...). Any ideas? It sounds like some of the "unloader valve" problems are similar but I do not see an "unloader valve" in the parts lists for the 2701...


... Karcher G 3050 OHR Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0780 seconds