Having problems with your Pressure Washers ?

After warm up pressure washer sputters and backfires...

\015 I need ot find out what the valve settings should be to determine whether it is the valves or the carbuerator. I do not have an operations manual or any other information on this model. \015\012\015\012Campbell Hausfeld Professional Model DK377114AV\015\012PW222000LE 2200 psi 3.0 gpm 150 bar\015\012\015\012Serial Number DK415616AJ\015\012\015\012Miscellaneous numbers on machine - 3153489 N071698\015\012\015\012Thanks for your help!!!\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

After warm up pressure washer sputters and backfires...


... Pressure Washers

I HAVE A BRAND NEW TROY-BUILT 2600PSI pressure washer. I have used it twice for about 1/2 hour each time. It worked perfectly. I tried to use it today with everything hooked up perfectly. The Honda engine started perfectly; how ever when I squeezed the wand trigger, the engine instantley died. I let the engine warm up and slowley pushed the choke in. I let it warm up for plenty of time; but everry time I squeezed the trigger it instantly quit- it even backfired once before dying. I changed the g


Sounds like the governor is stuck. My pressure washer speeds up when it has to pump. Don't know if yours uses vacuum to trigger governor or direct linkage. Good Luck. ... Psi Blue Max 2200 High Pressure Gas Power Washer

Pressure washer backfiring - Pressure Washers


... Pressure Washers

Not getting pressure I was washing my car with warm water from my house. I shut off the pressure washer to soap up my car when I restarted it I got very little pressure.


... Dewalt 3800 PSI Pressure Washer

Pressure washer sputters and stalls when trigger is engaged


Hi k2times01It is a always a good idea to clean out the gas tank and use new fuel, however, this sounds like an RPM problem. Try adjusting the RPM up a tad and see if it runs better when you load it. If the RPM isn't the problem, you may have ... Pressure Washers

My pressure washer works 4 a while then starts to sputter & dies?


I am going to suggest a tune of of the engine. Change the oil and oil filter. Check the air filter is clean and replace it if it isn't. A new spark plug. ... Karcher 2500 PSI Pressure Washer

Homelite pressure washer won't start after warmed up


... Homelite 308451006 Pressure Washer Wheel 12 X 2 "

Pressure washer backfires an kinda misses


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Excell pressure washer 2600 5hp honda runs bad when it gets warmed up then just cuts out


... Pressure Washers

MSV3024 pressure washer backfired after 2 hours of continuous use, then died. i was able to restart it but pulling the trigger kills the engine. i was able to pull the trigger rapidly and keep it running but holding the trigger down killed it again. now it won't restart. can it overheat? it has a full tank of gas.


... Simpson Pressure Washers

My Honda GCV160 Pressure washer runs rough and backfires


... Honda Pressure Washers

Gas motor runs but very little pressure comes out of nozzle. The 2200psi washer has only about 10 hrs running.I keep it in a warm garage all winter..thanks..rick


... Campbell Hausfeld PW2102 Gas Pressure Washer

Landa 3500 wont run. backfires. - Honda Landa PG 3500 PSI Pressure Washer


... Honda Landa PG 3500 PSI Pressure Washer

I have a union power pressure washer it runs for 10 minutes and then cuts off and wont work again, it still needs the choke on when the engine is warm and only runs for a few seconds


"it still needs the choke on when the engine is warm and only runs for a few seconds"This sounds like a fuel problem such as the carb needs cleaning ... Pressure Washers

The pressure washer i rented won't start after having used it for a couple of hours and filled it once with new fuel and then running it again for 30 minutes. i refilled it and now it won't stay going. it will start, and then it sputters and stops


If its a rented washer get the guy to come out and fix it,,,iv had rented things before and found out that some preson before me has put dirty fule into the thing,,, it sounds like a blocked card to me,,, try cleaning all the jets out ... Honda 8 HP Engine

My Honda GCV160 Pressure washer runs rough and backfires


... Pressure Washers

Engine keeps sputtering then dies - Honda Black Max 2600 PSI Pressure Washer


... Honda Black Max 2600 PSI Pressure Washer

My pressure washer is bogging out and shutting off. It will run fine for a bit then it starts sputtering and shuts off. I changed the oil right before this started happening and yesterday i changed the sparkplug and it seemed to be working fine until I used it today on the driveway.


SOUND LIKE FLOAT IS STICKING ... Dewalt 3800 PSI Pressure Washer

Pressure washer will run fine for about 2 minutes then backfire and shut down. I'll wait 5 minutes and get another 2 minutes of use. The oil and gas are both full.


... Dewalt DPH3100 Gas Pressure Washer

Karcher 3600 gx390 backfires - Honda Karcher G2400HH-R Pressure Washer


Usually this (back-fire/after-fire) happens because of a dirty carburetor, or bad gas. Gas can go bad with age or it can be bad because of water from condensate. I'm not familiar with this particular engine, but if it more than 1 spark plug, a foul ... Honda Karcher G2400HH-R Pressure Washer

Pressure washer(2600 pressure)won't start


To try and start it, take air cleaner off, and spray a little WD-40\015\012into carburetor, and then try it. Has this thing been sitting and not\015\012running for quite a while? Take a good look in fuel tank with a flashlight and see if you can see ... Karcher 2500 PSI Pressure Washer

Pressure washer stalls


Pressure washers work under very dirty conditions, no wonder they encounter engine problems. Here are a few pointers from a former pressure pump tech. The unloader is a source of engine overloading however this can easily be checked with a pressure g ... Honda Pressure Washer PSI 3000

Have a Husky Pressure Washer 2200 psi, HU80931. I don't have an owner manual. It has set for about a year. When I started the washer there was very little pressure. Did some cleaning and it was a little better, but now there is no pressure and I am having trouble keeping it started. Can you help? The washer was purchased at Home Depot and it has Briggs and Stratton the the washer too. Thank You, RJ


Look at eReplacementParts.com and the parts diagrams ... Briggs & Stratton Pressure Washers

Unable to start gas engine on a NorthStar pressure washer


Disassemble and clean the carb. If it ran briefly with the starer fluid then gasoline is not coming through the carb. ... Northstar Pressure Washers

Hi, I have a Dewalt pressure washer 3100 psi. I want to know why the pressure washer works okay for 1 hour then it stop working completely. the oil is fine, the spark plugs are okay, and when I tried to start it again it does not work. Can you please tell me what could be the problem? This pressure washer is almost brand new I have used it for only like 30 hours for 2 years that I have it. I used it couple times lately but same problem it works for 1 hour then it does not work any. I will


There are two common issues that will cause what you are describing. What you need to do is run the machine until it dies as you are describing. Then pull the spark plug and check for spark. If you do not have spark you have a failing stater. It is v ... Dewalt DPH3100 Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0927 seconds