Having problems with your Pressure Washers ?
Laking below sprayer large rubber piece covers area that is leaking
\015 Honda 340 gx 11 hp pressure washer leaking about 4 inches below sprayer has rubber piece covering area that is leaking\015
Sounds like your thermal relief has popped and is not reseting. These are an easy replacement. Usually availble as a "thermal relief valve" in sizes 3/8npt or 1/4"npt ..national pipe thread. Might also mean that your pump is overheating. Check and replace the pump oil. Make sure you do not allow this sprayer to sit and run without triggering the gun every couple of minutes.
Repair Help & Product Troubleshooting for Pressure Washers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Laking below sprayer large rubber piece covers area that is leaking
Sounds like your thermal relief has popped and is not reseting. These are an easy replacement. Usually availble as a "thermal relief valve" in sizes 3/8npt or 1/4"npt ..national pipe thread. Might also mean that your pump is overheating. Check and r ... Pressure Washers
Hi, We have a Frigidaire dishwasher machine 1500 series with fully electronic control. It is a new unit, has been installed nearly 4 months ago. The other day, when I went to take the dishes out of it, I notice that the rubber gasket that seals the door had come off somehow. Along with it I saw, sitting on the bottom, two pieces that looked like part of the seal, but I didn't know where they came from. I put the rubber gasket back on, but now the pieces and now the dishwasher will leak when runn
... Frigidaire Dishwashers
Large rubber band? And missing "main wash" cover
... Whirlpool Dishwashers
Honda 340 gx pressure washer leaking about 4 inches below sprayer
... Honda Pressure Washer PSI 3000
My dishwasher is leaking-2 small rubber pieces were found in the bottom of the dishwasher. Where do they go?
... Whirlpool Dishwashers
My dishwasher won't drain. It's a ge triton. Last time this happened I took off the covering to the drain and found a small piece of glasss. This time i find no obstruction but the water will not totally drain. The small area that the water collects in is full of crud making me think it hasn't drained totally in a long time.
... GE 24 in. Profile PDW7800 Built-in Dishwasher
We have a leak around the door. It looks like it is around the bottom of the door. We can not find any reason for this. We have checked seals and everything else we can think off at no avaiel. Model 15919. We have found pieces of black stuff on the floor like maybe a protective cover that is deteriorateing . Other then that, everything else is fine. Thanks Dan
... Kenmore 15919 Built-in Dishwasher
A piece of rubber is torn off the front load washing machine how do you keep the water from leaking
... Kenmore 17252 Free-standing Dishwasher
We have had an LG 7810 dishwasher since 2007. There is a film always left in the bottom of the dishwasher (large area, covers most of the bottom, not just near the drain) and a moldy sludge that builds at the bottom where the door seals. We can clean it out manually, but I don't think you should have to wash the inside of your dishwasher.
When you are done doing your dishes are they hot? do you see steam comeing out the dishwasher?\015\012if no you have a bad heater\015\012try heated dry are they dry at the end? not including plastic they never dry and the tops of cups. ... Dishwashers
Leaking input to the top of the dishwasher. Pollypro pipe comes up the back and into the top centre of the machine.... This is squirting out water when on wash cycle. Have undone large plastic nut on iside.. that has rubber washer on it... but the input pipe does not seem to have a washer between this and the steel body of the machine... this seems to be causing the water to squirt out... please let me know whether the washer has disintergrated or whether I need to use some bedding compound t
\015\012By reading Your problem most probably due to disintegration of washer only. Try with new Washer \015\012\015\0121. First try to adhere some wax or gumming material where washer is distingrated...if it solves u r probl ... Dishwashers
I have a GE dishwasher (GSD4020Y70BB) new in 1996. I replaced the whole motor assembly in 2007, seal was leaking. My dishes are not getting clean now, dried food left on plates, coffee stains in cups not being cleaned. I removed main spray arm, found nothing, turned washer on and plenty of water gushing out. I took the cover off sump all clean. I removed the filter screen in the back, there appears to be a valve with some soft rubber around it. Water gushes out of this, does stop during the cyc
Have you checked the drain pump impeller and drain hose? I am curious if there is a back siphon from the drain hose or the waste outlet at the garbage disposal might be blocked or plugged with food debris.\015\012I wou ... Dishwashers
Hello I am trying to connect my GE GSD680 dishwasher to the drain hose but there seems to be 2 drain outlets. 1 large and 1 small. The small outlet seems to open when I depress the plunger. The larger outlet is capped with a rubber cover. Which one do I use? Thanks!
... GE 24 in. GSD2120C Built-in Dishwasher
I have just bought a miele 5100 dishwasher, my husband connected it, but the inlet hose connection that goes to the water supply, which has a large plastic piece on it is leaking, you can click it open but it seems ok, not damaged in any way. any ideas or have i got a faulty part, thanks Helen
The big box on the tap end is called the aqua stop fitting. If it leaks around the tread make sure there is a washer in the big nut that screwas onto the tap. The tap might be old and not true on the fase. You could try some thread seal tape on the t ... Miele Dishwashers
I purchased a Bosch dishwasher SHU43C02uc/22 about 4 years ago. Recently during the last 2 washes, the machine has been giving off a smell like hot rubber during the wash cycle. It otherwise runs perfectly (dishes are clean, drains okay, etc). I have done just the routine maintenance like checking for large pieces of food but have found nothing so far. Any suggestions as to where I should look for where the smell might be coming from?
... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
I have two rubber pieces that fell off dishwasher door. is from door hinge and what might they be. pieces are black oval and about 1 inch long. the disherwasher door has little resistance when opening and closeing with out these rubber pieces.both black rubber pieces have split.
... Kenmore 24 in. 16039 Built-in Dishwasher
I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This
In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers
Leaks My dishwasher is only about 14 months old. Suddenly it has developed a severe leak. This leak appears to be coming from the area of the front left leg, and from the hinged area of the closed door. It has gotten alot worse now.
Duct tape...mine did the same thing, i tried hot glue, then daul compound high heat epoxy....finally i ripped the inside window off, covered it w/ tape, making sure i put the tape layered starting at the bottom so the water falls over (like roof shin ... Danby 22 in. DDW396 Free-standing Dishwasher
Leaking seals under the main sprayer arm
Remove front and rear panels, remove all internal attachments screws. If there are any wiring harnesses running through it, disconnect them, then drop and/or remove tray ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher
Karcher k3.68m leaks from the pump area. If I turn it on without holding the trigger down on the wand it will not blow pressurized water. If the motor is idle and the water is turned on then it leaks a lot from the pump area. What part should I replace?
... Karcher PSI Electric Pressure Washer
The door now drops hard when opening. In the past the door would drop slowly and was "not heavy" . I found a rubber piece on the floor just below the door. It looks like a rectangular washer . I am assuming the rubber piece helped slow down the drop of the door. Is this a correct assumption? Is this an easily repaired problem? Your help would be greatly appreciated
... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher
Removed rear toe-plate to detect leak. Leak caused by broken drain hose. Hose replaced. To do this the unit was tipped forward onto its front door to allow access to the base area. Water allowed to drain out the front base area. Unit re-assembled but now does not switch on. Water connected. Base-plate dry. No water was detected at upper-front control panel. Power is connected and reaching unit ( multi-meter test ). Tipping the unit forward seems to be the cause. Is there any fuse,
The micro switches are frequently replaced on the door handle and they don't need to ever get wet. A lot of amp draw burns those switches up while they are dry. If they were wet and power was applied then they got fried my friend. The good news is th ... Dishwashers
Leaking dishwasher I have replaced the rubber grommet around the soap dispenser latch and have double checked it for leaks.It is not leaking and I suspect that was never my problem.The water is coming from the lower right hinge area.I do not qualify for the maytag recall.I have never used the rinse aid dispenser but find it peculiar that there is no rubber washer in sight.Could I have a bad door seal? Maytag Model #DWU7402AAB
Hi there, dishwasher leaking might be due to either of these causes, check these:Main tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dishwasher, the foll ... Maytag 24 in. DWU7402 Built-in Dishwasher
I need to clear out broken glass from the gray pan underneath where the water drains to, but I need to take the twirling water sprayer off first to get to the next piece that looks like it is bolted down, and I cannot see how to remove the twirling sprayer part. The piece in the center of it does not appear to be a screw off part, so I am at a standstill.
Hold the twirling sprayer part and unscrew the big round nut part just above it, then you will see a 3/8 nut,remove it and sprayer arm will come off ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see
... GE 24 in. GLD6200L Built-in Dishwasher
Dishwasher leaking my GE Natulus dishwasher is leaking from the bottom seal, Is the two pieces that are at the very bottom that hold the motor where the seal is? I'm not seeing a seal. I'm not sure if that is where it is leaking. I've got the thing torn apart so it is difficult for me to say where it is leaking. I'm going to give it a whirl. Don't know if the repair is worth the trouble. The GE dishwasher is only 7 years old. What is the avg life of a dishwasher. I'm sure it's not top of the lin
There is a front door seal that may be the issue. It seals along the door sides/top and continues under the door to seal the bottom surface when closed. Mine pulled out of the seal channel under the open door where you can't see it without a small mi ... GE Nautilus 24" Built-in Dishwasher