Having problems with your Pressure Washers ?

Model: 1578201D PSI 4000 3.5 GPM The machine is only 2-3 years old and has always worked fantastically (with very limited usage). The inlet fitting got broken and we replaced it with a new inlet filter (part number 35169) and now it has low pressure. Is there something else we should check or replace?


Answers :

Hi there,

A "chattering" pressure washer pump can be caused by many things. You could have a bent or damaged inlet line, or the water supply might be too low. Fixing these is simple, but checking on the water supply is critical. Never let the water supply run low for any extended period of time. Other causes of a chattering pump include water that is too hot, you may have air in the pump system or a stuck float valve. A power washer pump that is vibrating, but not chattering could be the result of air in the system or debris stuck in the valves. Catching these pressure washer problems early and knowing what causes them will save you a trip to the repair shop, especially when it comes to the low-water issue.

good luck
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model: 1578201D PSI 4000 3.5 GPM The machine is only 2-3 years old and has always worked fantastically (with very limited usage). The inlet fitting got broken and we replaced it with a new inlet filter (part number 35169) and now it has low pressure. Is there something else we should check or replace?


Hi there,A "chattering" pressure washer pump can be caused by many things. You could have a bent or damaged inlet line, or the water supply might be too low. Fixing these is simple, but checking on the water supply is critical. Never let ... Pressure Washers

I have a LDF9810ST that I'm trying to replace a broken drain line. The old part number is AEM39700301 and the new part number is AEM69493803. The new part is made with a plastic u-shape plastic piece with a black hose that comes off the top of the u-shape plastic. Where does the black hose go?


Hey Glenn. Did you ever figure it out? I am about to replace my mother's hose since it cracked and I am looking at the service manual -but am I little stumped. I don't have the dishwasher in front of me with the part so I can't explore the options. ... LG LDF9810ST Built-in Dishwasher

I have a siemens GV630 control pannel inside my Bosch Aquasensor Dishwasher Model number SGS5302AU/07 it has a blown electronic componet on the main electronic control pannel. There are four of these identical semi conductor components on this pannel one of them has exploded. The part number off the component is Z9MY748 this part needs to be replaced where can I purchase this part (I live in Acukland New Zealand) Yours Sincerely, Casper Vissers.


... Dishwashers

I am working on a d8 dishwasher and found the cycle timer (49 sec/ 11 sec) faulty. Ordered a replacement timer from russell food equipment. The new timer is different mounting and timer motor specs. Can you tell me if this timer is the proper replacement. New part number cpn14480


... Dishwashers

Need new detergent cup dispenser for Model KUDI220T4. The detergent cup dispenser (Part number AP3042989) has been discontinued. Need to find the replacement part and directions on how to remove existing detergent cup dispenser and install new detergent cup dispenser.


... Kitchen and Much More Dishwashers

I've a Kenmore - Whirlpool dishwasher purchased in 7/2002(665.17574200), which seems clogged. T The ''Accumulator Assembly'' (8268429) filter is clean, and I've stripped the unit down to the plastic components. This has happened once before, and the repair person cleaned some kind of secondary filter, but I can't locate that filter on the parts diagram. I'm guessing it's below the ''Protector inlet'' (8268390). Either I buy a new dishwasher, which seems a waste, or I find out how to clear the


... Kenmore 24 in. 17572 Built-in Dishwasher

I have a McCulloch model number FHH18A/FHH20C. The brass fitting that comes out of the pump has broken. It's brass and plastic. McCulloch claims there is no replacement part, except to purchase a new pump and motor. Is there any after-market check valves that would replace this fitting/valve?


... Pressure Washers

How do i put the lower spray arm back together? I had to replace the top screw part and it seems to stand up to high. I have a small white plastic ring, a larger white split ring and the arm itself. I have tried every configuration to put this back together but it is not right - the new "screw" part number is the same as the original.


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Replacing filter gasket assembly part # WD22X10043 with new unit. Can you tell me how to uninstall the lower spray arm and Filter assembly without damage?


... GE Dishwashers

Our GE GLD5900 dishwasher's coarse filter, the large filter on the bottom ,is warping up. this allows food and other particles into spray arms which then fail to circulate. I don't think the fact that it is warping up is good for the pump eitehr since harder particles are not going into the sump for grinding at end of each cycle but circulating though pump. Although this part is cheap, shipping is not, andi I replaced it last year. the new one warped up as well a few months later and is no lon


I found the fix! I have a GHD6711N10, with the same problem. I was in Lowes Edmonton and found a GLD6964R10 dishwasher (same parts,looks identicle,different option on panel) with a steel coarse screen and silicone seal on it, plus the sump intake wa ... GE GLD5900NWW / GLD5900NBB / GLD5900NCC Dishwasher

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

My Bosch shu 5315uc does not advance to rinse or dry. Machine just keeps running. Dishes are dirty and smelly. Manuel says to check if water line is closed or inlet filter blocked. Have no idea how to do these. It is out of warrantee. Should I bother to pay for repair and parts, or would you just invest in a new one. Please help!


The waste pipe may be blocked or partly blocke. Is this connected with another appliance under the sink?( T junction?.\015\012It may be blocked or partly blocked. ... Bosch SHU5315UC Dishwasher

I have an Asko DW 95.2 model 1706 dishwasher that keeps filling with water. Every morning and evening, the whole bottom of the dishwasher fills with water. What is the solution? Do I need to replace the water inlet valve? If so, what is the part number?


... Asko Dishwashers

Manual Poured mixed gas in there, it has been drained and flushed, we want to replace the gas line filter, just need the part number and size


... Simpson MSV3025-S - Megashot 3000 PSI Gas-Cold Water Pressure

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

How do you replace the air inlet part 8268937 common on many new dishwashers?


... KitchenAid Dishwashers

Is shy66c05uc/14 the same model number as shy66c0fuc ? If so I need a the filter that inserts under the big mesh plate in the bottom of the dishwashwasher- where is the best place to replace such a part? Mine seems to be literally coming apart at the seams!


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

We had a repairman come in because the dishwasher wasn't working. He said to replace part numbers WD21X10169 interlock switch and part # WD21X10215 module control. I have now replaced both parts and the dishwaher is making a high pitch sound and not working.


It could be something stuck in the pump/sump area.. sorry. ... Dishwashers

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

LG - LDF7811ST Dishwasher will not turn on at all. I have replaced the main PCB board and checked all wires for shorts. The PCB board does have 120Vac to the board. I have also checked the latch and it does close the switch when the dishwasher is closed. I think it may be the main switch/power button board but can't seem to find the part number or alternate part numbers that can be used.


Hi. The likely culprit will be the power switch. The part number for this switch is 5020ED3011A.NOTE_ Make sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for po ... Dishwashers

We have a 100% failure rate on multiple parts on two Maytag dishwasher units and no longer can get replacement parts from anyone. Any ideas of what to do? Here is the latest summary we sent to Maytag: Thank you for the help last fall. As a follow-up, we are still having very bad results with your product. You authorized replacement of the unit which was done. After one dishwashing, THE NEW UNIT SHOWED THE SAME PROBLEM (WOULD NOT TURN ON). I called in and you referred us to a senior te


Well iam sorry to here of you major problems.if the control board has been replaced several times and no luck fixing it there may be a problem with the main power supplied to the unit,as well as having a problem with the wiring harness.usually a manu ... Maytag 24 in. MDBH940AW Built-in Dishwasher

We have a Haier dishwasher and the capacitor burned out. The mahcines are sold at Argos and Comet but I can't source a replacment part which seems kind of crazy. It is out of Warranty and comet can't help. The capacitor is 5uv and has 2 pins. There are generic alternatives with 4 pins. Comets spare part place doesn't sell the capacitors separately and don't know if they come as part of a wider unit. Can anyone help I understand these parts cost about £6 and don't want the expense of a new


... Haier Dishwashers

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1261 seconds