Having problems with your Pressure Washers ?

I need to check the unloader valve on my Karcher 3000psi pressure washer. I was directed to your site for help. I just need to know what to unbolt to get to the valve.


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to check the unloader valve on my Karcher 3000psi pressure washer. I was directed to your site for help. I just need to know what to unbolt to get to the valve.


... Pressure Washers

Not getting enough water flow into the dishwasher, suspect that a filter is clogged due to recent work on the waterline in the kitchen sink. Need to know where the filter might be located (on the dishwasher or on the intake valve before the connection to the dishwasher hose)? Also would I need to disconnect the water supply to pull out the dishwasher for access to such a filter.


You didn't specify a brand but most dishwashers don't have a water "filter." They may have an inlet screen at the water valve, which is typically located under the dishwasher. Generally, the lower front panel will have to be removed and you should ... Dishwashers

Where can i get a sceamatic for my kenmore ultra wash deluxe dishwasher model #665.13832k, we need to know the oms reading that should come up when we test the fill valve. thank you for your help on this.


... Kenmore 16764 Dishwasher

Operations manual Need to know where i can get a manual for my dishwasher as when we bought the house, one wasnt provided. Dont know what the cycles are all i know is how to turn it on and do a full cycle..dont know what the other buttons are for and I LOVE buttons...but...need to know what they are for


Get the model number from the dishwasher. Most brands have websites where you can find owners manuals and print them off. ... Dishwashers

Hello I have a Maytag Quiet Series 300 dishwasher model #MDBH955AWW that is making a lot of noise. I saw an exchange on this site where the expert suggested filling the washer to just above the heating element, running it, and seeing if that solved the problem. I tried that and it solved the problem. I believe the expert said this indicates the fill valve needs to be replaced. Can you tell me which valve I need and advise me on how to change the valve? The manuals I have (Use & Care Guide and In


Http://sites.google.com/site/cwyffimsbffoe/maytag-dishwasher-parts-manual- ... Maytag Dishwashers

It won't start. It has to be in the handle. What needs to be replaced or repaired? I know its getting electricity. Is there are relay switch that might need replacing. I know it is in the handle area.


Their is a lever switch, that can fail, please rate/vote this response ... Maytag 24 in. MDB3700 Built-in Dishwasher

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

I NEED TO get information on 2 of your older dishwashers. DU945PWKTo and DU945PWKTo. The information I'd like is: which one is quieter, how old are they? I am in need of a trmporary dishwasher while I am doing a remodel and either of these is available for me now. I just need to know something about each one so I can make a choice. Thank you. Ande


Hi\015\012\015\012Great that you require the information however, as both\015\012models are same so please post back with the serial no for both of them\015\012respectively for further assistance.\015\012\015\012Daniel ... Whirlpool Dishwashers

Hello, I have a Kitchen Aid dishwasher, model KUDS30IVWH3. The dishes have not been getting as clean lately, the bottom is decent but the top rack is not getting very clean. Also, when I open the door after the cycle is done, there's a bunch of detergent at the bottom of the door and on the floor of the dishwasher, like it isn't getting sprayed all over or something. Don't know if I have to check the water intake valve or if maybe the sprayers could be partially clogged.


... KitchenAid Dishwashers

Need help removing my GE Potscrubber 1130 dishwasher. This is an old unit, I have removed the front base board and disconnected the wiring but need to know how to get to the water line to disconnect that. Do I need to do it before I pull the unit out?


... GE Dishwashers

I need a new dishwasher What do you recommend between Kenmore Elite. Quietguard Ultra. Model no. 665.77962K703 versus LG model LDF7920 I get conflicting information- a repairman we know says LG is the better make, needing far fewer repairs than Kenmore in general ( this washer I am thinking of buying was made by whirpool, I was told at the Sears store) But online reports claim LGs need the most repairs. HELP OR... do you have something else to recommend?


... LG Dishwashers

Need to know how the valves go in pumphead


Check out page 10 on this link.\015\012 ... Karcher 2500 PSI Pressure Washer

I have dd603 single draw fisher/paykel dishwasher that i determined has a bad water valve. I just need to know how to take the draw facing off to replace valve


Hi,To replace the part, unplug the unit and turn the water off. Pull the \015\012bottom drawer out and push in on the two plastic clips just behind the \015\012front panel on the left and right side at the bottom. This will allow \015\0 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I'm having a problem with my Miele dishwasher G 879 SCVi I asked for assistance on 2/12/10 and paid $6.00. I have yet to get a response. Please let me know when I will as I need the problem addressed before Christmas Day. The problem again is that all the lights on the diswasher panel are all flashing at the same time when switched on. It may need to be reset somehow, as the power went off, which may have caused the problem. Your urgent assistance is required. Thank you


... Dishwashers

I'm Just Not Getting Any Pressure, There Is A Plastic Type Valve That Needs To Be Replaced And I Need The Correct Name Of The Part, Any Assistance In This Regard Would Be Greatly Appreciated.


... Kms Factory Reconditioned Power Boss 20344R 2500 PSI 23 GPM 160cc Honda GCV Gas Powered Pressure Washer With 25Foot Hose

Bosch SHU43C Dishwasher. Where to get parts - quick? Needs a new control-board / circuit board. All valves, switches, heater appear to work. Won't run open the water inlet valve. Won't run the self-check program. Has a burnt connection on the control 'mother-board'.


1-800-944-2904 That is Bosch Company. They will send out-- next day. ... Bosch 24 in. SHU43 Built-in Dishwasher

No Power I have a bosch shx33 dishwasher. I just replaced the water valve because of a leak and now I can't start the dishwasher. It's like there is no power to the unit. I know there is power because I get a shock if I touch the two wires that are connected to the water valve. Is there another trip switch or something somewhere?


First let me say that using parts of your body to test for mains electriciy is a VERY VERY bad idea. You are lucky you are not dead. Please do not touch live parts again, get a multimeter or a mains tester.\015\012\015\012If there is mains across the ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

My dishwasher works except is does not appear to be getting water. David psr responded: Most likely the water valve is defective or stopped up with calcium deposits. In either event, you probably need to replace the water fill valve. Not a terribly expensive nor difficult job on most dishwashers. Do I call a plumber, appliance store repair department or look for a local handy man?


I agree that the fill valve may be bad or clogged. You can fairly easily remove the valve yourself if you are somewhat handy and then take it apart and clean it. I doubt if the old valve is electrically shot but it is possible. Cleaning it out may ... GE Dishwashers

We need to get a stainless steel panel for our white Kenmore dishwasher model 13732 but don't know where to get it or what the part numbers are. We are trying to match our new stainless appliance.Our manuel is unavailable.


Check out this site sears parts direct.com. you can order these parts and look at images of your unit. if this helps please send me a 4 thunbs up post thanks ... Kenmore 13732 / 13734 / 13739 Dishwasher

I have a go kart with a honda power washer motor that I just purchased.It lacks power at start and stalls alot.Put new pull in,sprayed carb cleaner,adjusted carb,new air filter,need to know if it need a fuel pump and were to get one


Hondas are gravity feed no pump needed .You might need to clean the card though. ... Karcher 2500 PSI Pressure Washer

I have a tecnik tkd 795/2 i need to know the size of this dishwasher, need to get a new one


Tecnik tkd 795/2 Is 60cm in with ... Dishwashers

I would like to get a user manual for LG dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my toddler starting and stopping the dishwasher at her own whim! The front display has three buttons, 'power', LED display then 'Start/pause', & 'lock'. Thanks Shelley


Opps wrong make & model. Searched for fisher & Paykel and found what I needed! No longer need a solution. ... LG Dishwashers

I need to replace my Bosch dishwasher motor and pump assy, and need to get information on the procedure to do so. I know I have to pull it out, and turm it upside down or on it's side, but after that...I'm Lost..Can someone give me the procedure on this SHX46A05UC/14


Whats wrong with it? check out this link:\015\012http://www.squidoo.com/Bosch_Dishwasher_Drainage_Problem_Fixes ... Bosch 24 in. SHX46A05UC Built-In Dishwasher

My bosch dishwasher wont dry. The model number is she44c02uc/47. I don't know what codes i need to see to get it to heat. I've tried to hold the cancel drain buttons in to change the code. I get a C1. what does that mean. Thanks for your help. john


... Bosch Dishwashers

ASKO 1595 daer greendude, indeed your troubleshooting was right!!!! i pulled out the dishwasher and the base was full of water. once i got water out, the fault sign went away and it's ready to run its normal cycle. now i need to figure out where the leak comes from: either the fitting or the valve itself. just in case i have to replace the valve: any good source to get it from? i live in california. once again, thank you much!!! i'll keep you posted on the developments


I live in australia our part no is 8052120 ... Asko D1776 Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1338 seconds