Having problems with your Pressure Washers ?

No heating scout 135 northstar the sprayer works fine punps diesel through lines no fire what should i check first i could not find a reset button


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No heating scout 135 northstar the sprayer works fine punps diesel through lines no fire what should i check first i could not find a reset button


... Pressure Washers

I have a new Hotpoint Dishwasher HDA2000T00WW. Ran it once. Now it seems to have no power. Nothing starts. Disconnect switch is on and line voltage observed at connections to dishwasher. Does this have a reset button on motor which may have been tripped? Any other possible things I could check?


... Dishwashers

My Frigidaire FDB956RBC0 has been having trouble resetting on the control panel for a new load. At first I could push several buttons or wait a little bit for it to reset then I could push start. Now I have to open the front panel & pull out a yellow & white plug, then plug it back in to reset the buttons for a new load.


... Frigidaire FDB956RB Built-in Dishwasher

Hi our nemo dishwasher starts a cycle and fills but does not start cleaning cycle. Light under start button flashes. If start button is held on it resets and pumps out. We live in an area with high clacium in water. At first the machine only pumped out and did not start filling. I have cleaned the level sensor ( membrane switch filled with calcium) and it at least stopped pumping and started to fill. It does not proceed from here. I checked the level switch it seems to be working OK (NO and NC c


Hi.You need to move the appliance and check the height of the drain hose. If there is water in the tub you may have a syphoning problem (water refluxing in the tub) because of incorrect height of the drain hose elbow.The led t ... Fisher and Paykel Dishwashers

Dishwasher will not turn on. We think the start button is the problem, having checked everything else we could think of. We cannot find the manual. The light on "clean" keeps b;inking as well, but there is no button for this.


Hi,This is a common problem.Read :-http://servicematters.com/clean_led/8178496.pdfYou need to have an Acrobat Reader to view this file.Take a look at the Video :-http://servicema ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Smeg diswasher model numbe4r DF612SDX. Just coming up for two years old, various codes re error messages. E2, E5, E8. We have taken off the front panel where the buttons are - nothing obvious. We have taken the bottom off and tried to locate a reset button, but can't find one. We have cleared all the filters inside and checked the water intake and the filter there. Out of ideas, can anybody else suggest what we can try?


Any signs or sounds on the machine you here when the problem occur? ... Dishwashers

Water stays in the top draw filter area, have checked hoses found good connection and no kinks in the lines , could this be a pump motor problem. I have had a problem the first month with this unit and the tech. replaced a lot of parts including the computer for the top draw . i am now out of warr. time not by much and am starting to get upset that this problem is happening after such a short time.


... Fisher and Paykel DS605I Built-in Dishwasher

No Power to the front display. Just went out in the middle of a cycle. Have 120V going to the dishwasher. Could not find a reset button on the motor. All connections dry & look good. (no discoloration) My thought was the control pannel??


Hi\015\012\015\012Thanks for using FixYa. The issue seems to be with\015\012the electronic control going bad and should be replaced however, before\015\012replacing it take it apart and blow so ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a neff s9151f dishwasher (integrated) last night it was working this morning it will not turn on. I have checked socket, plug and fuse all working? Is there a reset button or can you suggest what could be wrong?


... Neff Dishwashers

The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find


... Whirlpool DU912 Dishwasher

I have a Frigidaire dishwasher. Model FDB520RHS0, Serial TH92539147. The drum fills with water but will not drain. I purchased the unit about 2 years ago. It has been used sparingly and mostly on light wash. I removed the basket and could find nothing blocking the drain. Is there a fix? Can I replace the drain pump? The unit is making a noise as if it is trying to drain but nothing is happening. I have checked the drain line for clogs and it is clear and the terminal end is conn


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

Kenmore 16604 In the middle of washing it stopped. No lights will come on and it appears to have no power. I checked the breaker, it's OK. All other appliances and circuits are working in the kitchen. Is there a reset button I can't find? Help!!


No reset button. Most likely, the thermal fuse went out. This happens if the water inside gets too hot. The thermal fuse is clipped to the electronic board behind the console. The heater thermostat is underneath the tub on the right side. The parts s ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

We have a Maytag Quiet Series 300 dishwasher (#MDBTT 60AWB) that is in a house we recently bought. A few days ago it worked, but now it won't turn on. We checked the plug that goes into the outlet and it is plugged in. Yesterday we did have a plumber come out and unjam the garbage disposal. I don't know if that could be the source. Is there a reset button on the dishwasher? Basically there is no power going to the dishwasher. Any suggestions?


... Maytag Dishwashers

My Whirlpool DP1040XTXQ portable dishwasher will not turn on. I've checked the plug, outlet, breaker, etc... I know there is a way to reset the keypad by holding down a couple of buttons at the same time, but I cant remember the right combination or how I learned it in the first place. It's not in the user's manual.


... Whirlpool DP1040XTX Portable Dishwasher

I have a GE Max,mod # GSD6610G00SB....it worked fine a few days ago,today theres no power to it,Any suggestions?I've already tried holding in the reset button and checked the breaker with no luck and can't find the papers!


... GE Nautilus 24" Built-in Dishwasher

The water is pumped out after the rinse cycle then it continues to run and make an unusual noise but nothing happens. The noise is almost a grinding sound. There is also a smell like some part may be hot or the wiring may be hot. I can reset the dishwasher and re-run the cycle up until that same point and it does the same thing again. I have had a repairman out twice in the last six months. The first time he could find nothing wrong because the problem was intermittent and he couldn't see anythi


Timer \015\012\015\012or\015\012\015\012 ... Bosch Dishwashers

GE Potscrubber 1200h tempertature sensor The push buttons will not set (work) except for the Reset button...it goes in a cycle in about 30 seconds. Normal wash, etc will not set. They go a little over half way in but do not connect. When it first started we had to reset the GFI breaker.


Hi\015\012\015\012The issue seems to be with the control not working fine, it\015\012can also be due a bad control board. You can take it apart and check the\015\012control board, blow air with hair dryer on the control if bad replace it. ... Dishwashers

I have a Kenmore dishwasher Mod. #665 17729000. When I opened it there was a plastic tube laying on toip of the contents of the bottom basket: it looks like it could be the feed tube of water to the top basket, but I could find no way of reattaching it. I have not been able to find a detailed drawing of the machine on line. Help please.


W have herebelow the link of your model with all parts layout which we believe will helpyou see how everything is put together and also you can order any part thatmight need to be replaced. Don't thing we need to describe a ... Kenmore Dishwashers

I have a Kenmore Quietguard dishwasher, only a few years old, and it won't drain. I pulled it out and checked the drain hose, could not find a clog. I took the basket and sprayer out, couldn't find any clogs there. It seems to be making a little bit of a different noise but does still clean the dishes. Does the motor pump the water out and could that be the problem?


I have a Kenmore Quietguard portable that won't stay connected to my kitchen sink faucet. Checked all I can and continues to spray the wall and me without staying attached securely to the faucet adapter. Help!! Any ideas? ... Kenmore 24 in. 15162 Built-in Dishwasher

Where is the reset button on a ge dishwasher ? GE dishwasher won't start up no power is getting to the machine..checked breaker and plug in all ok is there a reset button located anywhere ?


... GE 24 in. GSD2000Z Built-in Dishwasher

Our bosch dishwasher runs but no water is spraying on the inside. Is there a water filter clean out or is there a water pump that might be broken? I checked the line coming in and it isn't plugged. I made sure where the stainless line goes into the electric valve that it wasn't plugged to that point. I could see anywhere else to check if it was plugged. I figure there has to be a water pump, but I guess I'm not sure of that either. Thanks for any help..


Hi, welcome to Fixya. \015\012 \015\012By the description you've provided, it sound's like the wash motor is either seized or just stuck, let's hope it's the later. \015\012 \015\012Bosch had issued a service tip about this ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

For my Kudi01dl model dishwasher, the rinse light is on, but the unit will not respond to any buttons being pressed and won't turn on. When I press any buttons, two horizontal lines show in the front, but go off as soon as I let go of the button. Is there a ways to reset the unit? Everything was functioning fine the last time I used it. I use it about once a day. The problem started when I heard sounds coming from the unit, very loud motor sounds. The door was closed but I had not turned


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

After the last wash I noticed the bottom of my dishwasher (Whirlpool quiet partner 2) was filled with water. After unloading the dishes I closed the dishwasher and pushed the Cancel/Drain button but the button didn't work. None of the buttons work. It's as if the dishwasher became unplugged. I looked at the nearest outlet beneath the sink, but did not find anything unplugged. I wasn't able to drag the dishwasher out of its area beneath the counter by myself and figured I better ask first be


1.Check the drain filter for clogging. 2. Check the drain hose. Remove carefully to avoid water spill.3. Check whether flows freely from the hose.4. Check the drain valve if possible for you. ... Dishwashers

Bosch Exxcel Dishwasher (Enr SMS53E12GB/01 FD 9002) bought in July 2010. Error code 15 and "Check Water Supply" light on at same time. Have checked in-line filter in tap connection and all clear, water pressure OK, no kinks/twists in supply hose. Any help would be greatly appreciated - I'll have to call Customer Service in the end as it's outside of my problem-solving ability, but would like to check whether there's a known reset or fix I can try before I call.


... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

Whirlpool adp 5550 Dishwasher wont complete a cycle. The light in the start button flashes four times in a continuous pattern. Have pressed the start button for 3 -5 seconds to reset after which the machine seems to operate ok then it stops and the start button returns to flashing. Have cleaned the filter and checked the sullage pipe for blockages What do I do next?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1316 seconds