Having problems with your Pressure Washers ?
Pres. washer will not power wash, h2o flows thru but ?
\015 I have no pressure? what could be my problem with my Troy Built 2200psi washer (020245-01/model #)?\015\012Thanks\015
Repair Help & Product Troubleshooting for Pressure Washers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Pres. washer will not power wash, h2o flows thru but ?
... Pressure Washers
I have a frigidaire quiet clean I.Water will flow in the washer and it will pump it out at the end of the cycle.It doesn't circulate the water thru the spinner assemblies to wash the dishes.The soap will be lying under the dispenser,as it isn't circulating water.Any information would be greatly appreciated.Ron .Have any ideas what may be wrong?
The spray arm may be blocked see when door is open that it can spin and is any thing blocking the spray arm ,check if any food particles is in spray arm or tower check these areas out first write back if this dosnt work out.thanks ... Frigidaire Dishwashers
Did not clear cleaning solution from Craftsman power washer #580.752190 when last used. Connected water supply but water will not flow thru unit. Removed several plugs to find clog, but no luck. please help. Thanks
You need to replace parts 37 thru 41 on the pump breakdown.\015\012\015\012Click this link for the breakdown. ... Pressure Washers
I have a washer model 1805 (1800 PSI). Everything works but there is always leaking of water (sprays) when I use it. The leak is not from where the water hose connects to the washer, but where the black piece attached to the hose is connected to the body of the washer. I can still do a decent job of power washing, but am wondering if the leaking of water is reducing the power of the washer.
Yes, leaking water will reduce the pressure. Sounds like you need to replace the O-Ring inside the connections on the pump. This is where the pressure hose connects to the pump. If you look carefully inside that connection you will see an O-Ring. Use ... Campbell Hausfeld PW1805 1800 PSI 15 GPM Pressure Washer
My kenmore dishwasher will run part way thru the wash cycle, stop and the hi temp and heat dry lights will flash back and forth and not do anything else. When you open the washer it will have water in it that has not pumper out. It seems that the light wash cycle will work after trying the regular or heavy wash. The washer is 1 1/2 years old. model # 587.15259402
First cut power for ten minutes by unplugging power cord or tripping circuit breaker.If that does not work try the following reset.Press in succession:High temp-air dry-high temp-air dry - High temp-air dry-high te ... Dishwashers
Power washer has low flow why ..? - Karcher K2.26 Electric Power Washer
... Karcher K2.26 Electric Power Washer
I have a Husky pressure washer with a Honda 2600psi engine. Problem is, no water will come from the pressure hose. I connected the water w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help.
Check the quick disconnect to the wand these are spring operated and can get stuck ... Pressure Washers
I have a zanussi ZSF2440 dishwasher, when it turned on by the power button on the front you can choose a cycle and start it, Once the cycle is started it fills up with water but doesn't stop until it over flows setting off the flood protection, which cuts the power, so all the lights on the display go off and stops the water flow and drains the dishwasher and keeps draining the dish washer while the flood protection is on. It seems as if the dishwasher doesn't know when its reached its correct
... Zanussi Dishwashers
AFTER RUNNING MY DISH WASHER I OPENED THE DOOR THERE WAS ST HALF IN OF WATER IN THE BOTTOM SO I WAS GOING TO WASH AGAIN BUT HAD NO LIGHTS ON CONTROL PANEL HAD POWER TO THE DISH WASHER BUT NOTHING WOULD LIGHT UP? DONT HAVE 10 WASHES WITH THIS UNIT .? MODEL #655-13443K900
Hi Bennie, Try http://www.manualowl.com for free PDF for troubleshooting the issue you are having. I hope this helps. ... Kenmore Dishwashers
Whirlpool dishwasher part #3385181. Machine had gone thru wash cycle and was starting to dry. Smelled electrical burning smell, opened washer door and washer was filled with smoke. Turned everything off, cleared smoke, and the washer water dispenser is very hard to turn. Washer has symptoms of burnt up motor that turns water dispenser. Machine is 12 years old. With cost of replacement motor and possible part (pump?) that might have clogged and caused motor freeze up, is it worth fixing or junk
Bosch Dishwasher (model SHU43C05UC17/17) will not power power on after stopping in the middle of a wash cycle. AC power is present at input and water supply is connected and supplying water.
... Bosch 24 in. SHU5305UC Built-in Dishwasher
Why cant i get h2o to come out of my honda pressure washer? i disconnected hose, and no flow..was just workin fine other day
... Troy-Bilt 020528 Gas Pressure Washer
GE Quiet Power II (12 y.o.) dishwasher not rinsing dishes. Water flows into unit but when wash cycle begins, water drains out immediately.
... General Electric Dishwashers
Dish washer has no power, plug socket ok, power going in, appeares that it lost power just B4 the end of a washing cycle, water still in the base
Sounds like a kichenaid\015\012take the screws out of around the door \015\012t15 torques usually \015\012on your control board is either a white fuse or a round black bimetal \015\012what is your model number \015\012ch ... Dishwashers
Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?
You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers
My KDI-21A Kitchenaid/Hobart dishwasher does not wash the top rack, but does fine on the bottom. It appears that water is not flowing to the top wash bar. Is is possible for only the top bar inlet to clog somehow? I've pulled the bar assembly itself and the main tube from the wall of the washer to the top wash bar is clear .
The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find
... Whirlpool DU912 Dishwasher
Kenmore elite dishwasher model 665.13153k701 At end of wash cycle, water does not drain completely. Intemediate drains during wash do drain completely. rinse and hold drains completely. watching water at end of wash thru disposal, water flow cuts off like valve closed. other drains taper off
... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
My Kitchenaid dishwasher KUDIO1FLSS1 stopped during the wash cycle. No lights and no power. I checked the power to the washer and the fuse inside the door panel. Both fine.
... KitchenAid Dishwashers
I have a maytag portable dishwasher that I paid over 500.00 that I would not give 10.00 for another just like it. We have had it a little over a year and I don't use it. It has never thrown all the water out after each cycle and then it over flows. I can't leave it washing and go about my other chores because I can't trust it,so I wash my dishes by hand. I am 58 yrs. old and I am having to go on disability due to an illness and I need my appliances to work.I have a Maytag washer and I like it ju
Call whirlpool at 800-874-4698 have your model and serial handy, tell them what is going on would not mention the 10.00 thing, be nice as you can and ask for some help with this issue and they may help you As dad says it caint hurt to ask\015\0 ... Dishwashers
Husky HU80722 model Water flows thru the washer. Have disconnected all hoses, checked filter screen it is clear. Reconnected hoses, Engine runs fine home water pressure fows through washer. Still not producing any pressure.
... Northstar Pressure Washer 3000 PSI
Kenmore Model Ultra Wash Model 665- 45955 Problem: Dish washer leaks at bottom intitially during sudding cycle only...first 5-10 min... then no leaks/drips thereafter thru balance of clean/rise cycle. Whats up....Thought possible seak around washer door is bad but no leaks at bottom or elsewhere after the sudding cycle is completed. Please provide complete resolution reply if possible Tx
Hi\015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If you have water leaks around the base of your dishwasher,\015\012you may be using a detergent that is causing too much suds. Cut ... Kenmore Dishwashers
Bosch SHX33A: lights come on properly in response to buttons, it has power. Close door, it makes the normal startup sounds, then water flows in. Normally, at this point washer starts into normal cycle. Instead, it just sits there and nothing happens. Forever. Not a matter of patience: we've left it in that state all night long. Have flipped power circuit and started over, everything else I can think of to kick-start it, no change.
Hi\015\012\015\012The issue seems to be with the motor or the door latch\015\012assembly going bad and should be replaced. The washer won't start the cycle if\015\012motor is not working, as its filling with water so I believe that the do ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher
SERIAL # NEX725476 CRAIG N DOUGLAS 63 14TH AVENUE TAURANGA I bought my new model double dish drawer DD60 model thru Noel Leeming on the 29.07.2009 (inv 104174599 Cust # 5321218) I have already written a strong complaint about this useless dishdrawer some months ago. I was asked to provide the serial number, which I have done as above. I am still totaly unhappy with this dishwasher. Where does it say in the manual that you have to buy expensive dish tabs, with power balls, & wash every wash
... Fisher and Paykel Dishwashers
Bosch SHX 46L Our dishwasher would complete a cycle everything good. Sometime after, it would spray and wet the dishes leaving water in the bottem of the washer. Now, the pump runs constantly when the washer is powered on and it will not start a wash cycle. Any ideas?
Http://www.computercrowd.com/Itm250480379703_60270_Bosch_Dishwasher_Service_Repair_Manual.aspx\015\012\015\01 ... Dishwashers