Having problems with your Pressure Washers ?

Debris in the pump

\015 I have the model 020245-0 and had the same problem. The first time I found that a small pebble got in the pump mechanism somehow. Simply taking it apart, cleaning it and putting it back together fixed it. I am having the same problem now again. When I took the pump apart this time, I found that the seals are bad. I'm working on replacing them now in hopes that it will work now.\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The water is not draining from machine, although the pump is obviously trying. It doesn't sound quite right. Kind of a growling noise. It can pump water into tubs when experimenting with ideas, but can't pump hard enough to pump the water into the sink. This is all done with the hose removed so we could check for debris in the line. I've checked the filters and they are clean and clear. This is a used machine a friend gave me, and it's been working beautifully until now.


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bosch 24 in. SMU40 Built-in Dishwasher

My Bosch Dishwasher SHS6902GB fails to pump water both in & out. I'm now down to the pump rotor. The limited user manual talks of removing food debris but there doesn't appear to be any stopping it? How can I remove the pump to see if this the problem or recommendations? Thanks


... Bosch Dishwashers

Whirlpool dishwasher does not pump all the water out of the basin. How do I get to the pump to clean the debris out. It seems impossible to get to the pump from inside the tub.


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...Dishwasher Problems - Water will not drain out ... Dishwashers

Dishwasher model: se6 tie1 Fitted under kitchen work-top. Problem: After setting a program & switching on & closing door ? there is a normal sound from within but if door is opened there is no evidence of water being pumped in. I previously cleared food debris from the drainage pump area (including under the pump cover), checked the spray arms and checked the water supply was getting as far as the long in-take pipe. As it seems problematic to remove the (screwed in) dishwasher, I have not che


... Dishwashers

Bosch shu9925 At the start of the cycle, the washer is in pump mode. It remains that way. No water flows into the washer.. It just continues to pump. We checked the drain, some debris and checked to see how the pump was working, it is fine. Any suggestions?


Take bottom front panel off to expose the bottom tray. you will find there is water in it. mop water out and appliance will operate ok. turn off at mains first.\015\012\015\012if fault reoccurs, you have a leak which will have to be trace ... Bosch SHU9925UC Built-in Dishwasher

The pump is running, but the water is not flowing as you might expect. I believe the pump may have debri somewhere, and I would like to clean it out, but can not remove the lower arm. It has a flat plastic wing nut, that I do not not want to break off.


Number 6 in the picture HERE is the chopper which ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

Dishwasher pumps dry, adds and heats water, but does not go through wash cycle. It apparently continues through all cycles, but never pumps the water through the spray arms in either wash or rinse cycles. spray arms are both free and clean, no debris anywhere obvious.


Hi.The impeller pump is probably faulty. Before going for the pump check the drain well and drain hose, drain blockage may prevent the machine from switching to recirculate. Also double check there is no blockage or leak in li ... Asko 1385 Dishwasher

When we start the dishwasher the pump runs but no water flows. The filter was clogged with debris and I cleared it but it still just spins the pump and no washing occurs


Hi,OK there's two things that seem likelyThe aqua-stop or the inlet valve.Try turning the water off at the inlet hose. Disconnect the inlet hose and let the water drain away. Refit the hose, turn on the water and s ... Bosch Dishwashers

GE profile dishwasher gsd5130d00ww does not pump all the water out of the basin after each cycle. The pump runs at a very low flow and only removes a small portion of the water. the basin screen and sump screens are clear of debris


I believe this unit has an anti-siphon ball that is equipped to prevent back flow. Pull the dishwasher out and syphon the remaining water out. There is a large manilla colored hose that elbows from the back with a large hose clamp. Loosen the hose ... GE Dishwashers

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

Makes rumbling noise during wash cycle. I've pulled the pump and found no debris. It's been making this noise for about a year now. No problems with our dishes getting washed. Do you think the bearings inside the motor may be bad? If so, would I need to replace the motor and pump assembly?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

Cleaning out debri in pump


I have model 665.13732, the top spray arms are not working any solutions? ... Kenmore 24 in. 17032 Built-in Dishwasher

Debris in the pump


... Pressure Washers

I have a S/N SHU4302UC/U)6 dishwasher that is not draining; I don't think the drain is blocked, and there's no debris in the trap. How can I tell if it's the pump that's broken? Could it be something else? Everything else seems to be working


Problem may be\015\0121)drain block(inside the trp).\015\0122)if drain pump is auto (or)manual.if drain pump is present check the pump is working. ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishlex DX450 has been working OK for years - suddenly not washing - white deposits and cutlery looks greasy - but machine clean and all filters and arms clear of debris. Have removed pumps and hoses - all clean - no obvious problems. Seems to complete a full cycle - but the problem is consistent every wash - independent of the dishes. Welcome any insights - thank you, Richard


... Electrolux Dishwashers

My dishwasher will not drain after cycling. I have check the drain hose connected to the disposal. All is in good order the hose is not cinked and the air hole is unblocked. I have also checked the screen at the bottom of the dishwasher, there is no debris or blockage here either. I can run the dishwasher on normal, it cycles but I still have stagnat water left beneath the bottom rack. How do I check my pump to see if it is working or could it be a short of some kind? It is a Kenmore Quite


The problem is a solenoid under the unit. It is a small black cylinder that operates a valve to change from the wash cycle to the drain cycle. You can probably order a new one from Kenmore for pretty cheap. ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

Model Karcher 320H 1.141-205 When first switched on the pressure builds up and then the machine keeps no switching on and off, opening the trigger on the lance and it works ok, close trigger and the pulsing starts again, if left like this it would probably burn the motor out. I have lubricated the brass/plastic piston the operates the on/off switch but problem still exists. I have also opened the pump chamber but cannot see any debris or problems with the rubber seals. Any help would be most app


... Karcher 1550PSI Pressure Washer

Dishes and Glassware after running through complete cycle are coming out with dried debris . We had service tech from supplier come to residence and machine supposedly is working fine. we are using recommended packets of detergent for each full load . Is the unit to be connected to garbage disposal or a direct feed to drain. Based on smaller pumps in newer dishwasher i am wondering if this is the issue .


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... LG LDF6920 24 in. Built-in Dishwasher

I have a Kitchenaid KUDK03CTSS2. It goes about half way through the entire cycle, let's say half hour in and then it sits there buzzing/droning for at least 30-40 minutes, then it finishes fine. Had a service guy in and he would't wait for the symptoms to appear. Everything is good at the beginning. He replaced the pump motor, didn't find any debris in the unit. But it's still doing the same thing.


Turn the dishwasher off about 20 minutes after it starts the droning/ buzzing and feel the water temperature.\015\012\015\012Also run the dishwasher in a short cycle where it uses cold water only and see if there is any difference.\ ... KitchenAid Dishwashers

I have a Kitchen aid dishwasher model#KUDP02CRBL2 and I replaced the drain pump and all it does now is drain very slowly i haveblown air through the drain line and removed all debri that was blocking the drain line cant figue out why it drains slow


... KitchenAid Dishwashers

Dishwasher won't drain - even after we manually cleared out any debris from pump


You may have a kinked drain line or the drain system is restrictive or.. the pump itself is damaged from the debris you found.. There are a few ways to determine which problem you have.. One way is by detaching the drain line from the drain stub unde ... Frigidaire Dishwashers

I have a Bosch Dishwasher, Model SHE46C06UC. No mater what cycle I start it in, it simply activates the drain and continues to run without ever starting. Within the last week prior to the dishwasher not working, I noticed a low hum/vibration emitting from the dishwasher. I've clean out the screen and drain filter, removed the pump cover to check for any debris. I've manually added water and it does drain. Additionally, the drain cycle continues to operate even with the door open.


First thing you may want to check is the door switch. You can pull it off and measure the resistance with an ohmmeter. If you get good reading while pushed in and none while switch button is released, then it is a good start. Next, you may want ... Dishwashers

My McClary dishwasher does not drain properly - the outflow is much reduced. My guess is that hose/pump is clogged with debris. What parts in the pumps and drain assembly do Check?


It could be the small black FLAPPER in the pump motor has broken off and is blocking the pump outlet. ... Dishwashers

Dishwasher not draining E25 error code (Bosch exxcel) . I have cleaned filters & removed pump inspection cover to check / clean debris I have also checked the waste water pipe is not kinked, it runs for 1hr 15 mins last time and then cut out with the error code displayed.


Gr8 stuff klaudi & Nypmh - rocking it back 45% worked a treat. Bloody BonzaShell XX ... Bosch Dishwashers

I have a Hotpoint Aquarius FDW 20 dishwasher. Prewash and Wash lights were flashing, machine had stopped and water was at the bottom of the machine. What does this indicate? After removing some debris from the water drainage pump, then reassembling the machine, I now get the pre-wash LED flashing and a motor operating, but no futher progress into the wash cycle. What does this mean?


Dishwasher always full of water at the end of cycle ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0654 seconds