Having problems with your Pressure Washers ?

Gun leaks needs new gun - Pressure Washers


Answers :

Try northerntool.com
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gun leaks needs new gun - Pressure Washers


Try northerntool.com ... Pressure Washers

Our Karcher pressure washer gun is leaking at C clip can we fix it without buying new gun? We have bought a new C clip but its still leaking. regards Mike


... Karcher Pressure Washers

My Karcher K730 MXS pressure washer was leaking water out of the rear of the gun handle. I bought a replacement hand gun and the new gun is doing exactly the same!


... Karcher Pressure Washers

I have a troy built pressure washer leaking gas from the air filter i looked around for advice and hurd bang against the carb and it will realease the float valve i did it and it worked but should i clean out the fuel in the filter area or the filter will it harm it as it is or should it be okay? the filter was soaked in gas dry now and when it happened the gas flowed from the air intake (behind the filter) if i need to clean out in there how do it do it and if i need a new filter


Definetly replace the paper filter and yes Lowes will carry them.if it does not leak now, I would leave it alone or you will be installing a nine dollar kit.The briggs kit # is 294260 is you choose to do it anyway ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Kew Hobby pressure washer and need a new lance which attaches to the gun.


... Karcher PSI Electric Pressure Washer

Simoniz s1800 gun assembly is leaking need new washers


... RTO BE Pressure Washer Gun and Wand Assembly 59" with Fittings

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

I have a Karcher 550M pressure washer and was using today when all of a sudden the water started to pour through the handle hence lost the pressure of the water. Is this a rubber washer issue or the gun needs replacing or simpler than that. To be honest although I have had the washer for about 3/4 years now It is hardly used. Also can I fix it and where would I purchase the allen key to replace. Thanks Brian


... Karcher Pressure Washer Gun 91120200 91120200

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

Pressure washer water leaking from gun


Depending on the manufacturer, you may purchase a rebuild kit for these very inexpensively. It's just a small pack of o-rings and maybe a spring or two. It would be a good weekend job, pretty simple to figure out, I've got faith in you. Thanks Dana ... Pressure Washers

I have a Coleman pressure washer model APW-VB-1400A, 1500psi and need a new high pressure hose. Where can I find one?


... Coleman Pressure Washers

No pressure I have a husky 1750, With all connections clear of any obstructions the pressure washer turns on sounds normal, but when you pull the trigger there is no way near enough pressure to do anything..The gun and H/p hose is brand new..Any ideas?


It is probably air locked....Here's what you need to do. Connect the garden hose, and HP hose, but not the gun. Turn on the water, and let it run while you make sure that there are no high points in the garden hose that can trap air....Work the hos ... Pressure Washers

Need a new adjustable nozzle for my power washer. It sprang a pinhole leak in the tube. Where can I buy a new one?


Home Depot,Lowes,Ace& Coleman.com ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I need a new lance for my pressure washer model KSM i am in caloundra qld need to know anybody in my area who may hold spare parts


... Comet Pressure Washers

My Durabuilt power washer model #D81404 blew apart where the hose connects to the gun. I think I just need the copper fitting that connects the gun to pressure hose. Can you help me?


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

My 1750 huffy power washer was hard to get water pressure for about 10 minutes, once the machine was putting out pressure i noticed it was leaking oil from the bottom of machine need help with the problem


There is sticking valves in the pump ... Pressure Washers

I have a 1994 3005 super hot pressure washer made by mi t m corp,i had pics of my thermostat system but my computer crashed i have a new gauge and probe ,module,and thermal stat i need to find a repair manual so i can put it back together,also i get pressure and then i lose it .is this my valves or unloader problems?


... Mi T M Mitm 3500 Psi Hotcold Portable Gas Pressure Washer

I have a handy power HPGW 1500 pressure washer and when its used the water sprayes out of the gun around the handle part as well as the nozzel is it possible to purchase a new gun and connection to the machine


... HP Pressure Washers

Halfords HP1500 pressure washer in need of a repair. Where can i find a new pressure switch for it ?


... Pressure Washers

I borrowed my nieghbors power washer. It worked the first day all day. In the morning i filled the gas with a fuel stabiler, and 30 oil. I may have over filled it. Upon turning it on the oil started leaking from the air filetr compartment. It starts, but then smokes starts to fume and all the oil leaks. Did I break it or is it a easy fix. I cleaned the filter housing. Also the filter was soaked with oil. should i get a new filter and install it or what is the solution. need help.


You will need to get a new filter, and drain some of the oil out of the machine. If you over fill these this will happen. 90% of the time nothing is broken. ... Karcher 2500 PSI Pressure Washer

Wand leaks the wand split and leaks pressure. I need a new wand,where can I buy one?


The wand split because it was made incorrectly.The identification number on the tube decreased the wall thickness and caused the tube to split. All the info by mr fixit is bs ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Need schematic for gfi/reset button / ac plug for pressure washer. Mine blew a 22uf cap and I need to see polarity to install new one.


... Alfred Karcher K255 Electric Pressure Washer

RY80940 The valve under the pump is leaking. I think it is a pressure release valve but I am not sure. I tightened it when I had to re attach two bolts that were holding the motor on the metal case then it worked for awhile then it started to leak and I lost all power. Should I tighten or loosen it or is there a washer that needs to be replaced?


... Pressure Washers

Need a parts manual and preferably a repair manual for a Stihl high pressure washer model RE250K. It has a water leak and previous owner donated unit to me saying he has spent enough money on it and now it has this leak. I am a qualified automotive mechanic amongst other things and would like some guidance; otherwise I will go in blind. Thanks. Bob Hudson Sydney Australia.


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0843 seconds