Having problems with your Pressure Washers ?

I have a pressure washer which ran out of oil in the drive section and damage the bearings and swash plate there seem to be no parts available can these parts be sourced.


Answers :

If the manufatgurer doesnt have them, you may be out of luck.
\015\012
\015\012If you ran it without oil ... you are pretty much stuck. On the other hand ... You could build yourself a go cart.
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a pressure washer which ran out of oil in the drive section and damage the bearings and swash plate there seem to be no parts available can these parts be sourced.


If the manufatgurer doesnt have them, you may be out of luck.\015\012\015\012If you ran it without oil ... you are pretty much stuck. On the other hand ... You could build yourself a go cart. ... Pressure Washers

We have a Haier dishwasher and the capacitor burned out. The mahcines are sold at Argos and Comet but I can't source a replacment part which seems kind of crazy. It is out of Warranty and comet can't help. The capacitor is 5uv and has 2 pins. There are generic alternatives with 4 pins. Comets spare part place doesn't sell the capacitors separately and don't know if they come as part of a wider unit. Can anyone help I understand these parts cost about £6 and don't want the expense of a new


... Haier Dishwashers

Miele Dishwasher Model G1040, Type HG03, NR: 32/65143704 The machine is three years old. The cycle reaches almost to the end, then all three LEDs merge together, and the pump runs continuously, even with the master switch off. I have taken the machine out and removed the base plate. When I first took the machine out of its position, I tipped it backwards and water came out of the bottom. All hoses and parts in the bottom section seem perfect in every way but the inside of the bottom plate indica


... Dishwashers

I just bought a used Kenmore portable dishwasher with Model #587 1749581. I'd like to find an owner's manual and parts list for this...in particular the hose adapters to fit onto a kitchen faucet. Can't seem to find such. Do you know how old this dishwasher is and if parts are available?


You should be able to go to the Kenmore web sit and down load a manual. If there is a manual you can get it on line. Try google put the model number right in the search. ... Dishwashers

I have a Bosch dishwasher and the upper arm that spins and dispenses water has come off. There is a bracket on the back wall with 2 protruding pieces and an open whole in the middle which seems like the water comes out of it. There are 2 metal "clips" on the side of this braket which seems like the plate part of the spining arm should be able to attach to it.. I cannot figure out how..Any helo would be apprecated..


On Bosh dishwasher you just slide the upper arm vertically until it snaps in place. The arm attachment will snap automatically into the clips, onto upper dishrack, unless the upper arm is damaged ... Dishwashers

My asko 1776 dishwasher seems to be missing the ball bearing assembly for the top rack. my home was rented for a couple years and it is possible that it broke and the tenants just threw out the pieces. i did find one ball bearing on the floor of the unit. if I order the replacment parts, can i install this easily by myself?


Hello, welcome to fixyaIt's not too complicated, you'll be fine. Here's what works for me, move the rack stops to the left if you haven't already and then the ra ... Asko Dishwashers

Where can I buy a solenoid gasket (the little rubber part that controls the water inlet) for a hobart am-14 warewasher? They seem to be a hard part to source.


Most AM-14's use a Parker 3/4" solenoid valve. Readily available from Johnstone Supply, International Commercial Supply, Franklin Machine Products, or Hobart (same part, more expensive). Comes as a whole kit, new diaphragm, strainer, o-ring, and plun ... Hobart 42 in. AM14C-154 Free-standing Dishwasher

Hello my dishwasher is not cleaning the dishes properly and has undesolved powder in the dispenser.The plastic rack has snapped in some places and tends to sag There is a chalky residue on all utensil and they seem to come out worse than before the wash Please advise as to where replacement parts for the top rack are available and the cost for the same and if I need salt in the disherwasher . I live in Madeley ,northern Suburb of Perth Thanks Parames


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Whirlpool Dishwashers

Cutlery is cloudy and dirty, some food is dried onto knives and forks. Cups and glasses are cloudy and not clean on inside. Coffee or tea stains are not removed. Plates and soup bowls seem OK , and water is draining properly. We have tried with less soap, more soap, gels, tablets and powders but to no avail. The dishwasher does not clean dishes etc, as as it once did. There doesn't appear to be any problem with the 'cycle'. The machine is about nine or ten years old, and has run fine until ve


Don't know much about Dishwashers but have you tried a descaler.Is the water spraying out as normal.Is the water actually getting hot, could be a heater element problem.If you look here you may get some other ideas just by loo ... Dishwashers

I have an indesit Dw9S dishwasher. Water is leaking from the base of the unit. It seems to be a problem with the seal and plastic ring inside the base of the filter holder inside the dishwasher. Can you please advise if this seal is available as a spare part and if it is a difficult task to fit. Thank you for your assistance Graham Neilands


... Dishwashers

Cutlery is cloudy and dirty, some food is dried onto knives and forks. Cups and glasses are cloudy and not clean on inside. Coffee or tea stains are not removed. Plates and soup bowls seem OK , and water is draining properly. We have tried with less soap, more soap, gels, tablets and powders but to no avail. The dishwasher does not clean dishes etc, as as it once did. There doesn't appear to be any problem with the 'cycle'. The machine is about nine or ten years old, and has run fine until ve


They must have changed the way they treat the water in your area. those spots are caused by hard water. www.dishwasherfilter.com has a product out for this problem. it filt ... Bosch Evolution 300 SHE43M05UC Stainless Steel Built-in Dishwasher

Am trying to deal with source of non-draining problem-drains but not complteley. Have remove three screws from love plate but cannot seem now to remove the assembly (which also golds the lower spray rotor). Any ideas.


If it is a Bosch, the following just worked for me: pull out screens and on left side of sump (looking down into bottom, 9:00 position) has a torx screw holding cover over drain pump, remove screw, cover has tab towards backside to lift towards you. ... Dishwashers

Is shy66c05uc/14 the same model number as shy66c0fuc ? If so I need a the filter that inserts under the big mesh plate in the bottom of the dishwashwasher- where is the best place to replace such a part? Mine seems to be literally coming apart at the seams!


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

John deere A 16 pressure washer electric, pump faltering, intermitent pressure changes, motor seems okay running independently. Are parts for A16 pumps available?


... Electric Pressure Washers

The water dispenser inside the unit doesn't seem to be rotating properly and I am not getting a proper water flow during the wash cycle. can I repair this error myself or will it require a professional? is there a part replacement available from the company?


The water level should come just below the heater. Also check your spray arms and make sure the holes in them are not plugged. Remove the bottom spray arm and check to make sure mineral deposits such as calcium and llime are not built up and blocking ... Dishwashers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Missing electrical connection plate for LXiH ML-13007 dishwasher. Where can I find this part?


... Hobart Dishwashers

I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9


... McCulloch Pressure Washers

The door will not latch closed. It seems to be the latch inside the door itself. I can't seem to find the part or part # Can you help?


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete ... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

We are looking for the following part model number : LD2040WH, for an LG Dishwasher purchased in South Africa. Part number - 4681ED1003C. This part is not available in the UK, however would you be able to assist us with a website, which might have this part?


Http://www.repairclinic.com/SmartSearch/smartsearch.aspx ... LG Dishwashers

Hi I have a maytag dishwasher and a maytag fridge my fridge has been nothing but problems it has flooded my house twice in the past 9 years, the part on the inside are braking that hold the shelves in place and my dishwasher is on a recall that i just found out today. IT has a part called vent inlet that is cracked and the part is no longer available,so is part can i use it with out it in and I need to have a repair person in to fix what ever the problem is that has caused house fires I have no


... Kitchen and Much More Dishwashers

My lower rack will not clean bowls or cups and I have to be very careful how I place plates. The serviceman has been out twice and I have run vinegar through multiple times with no improvement. My top rack is working fine. I have tried running it on different settings and we have verified that the lower wash arm seems to be spinning. The temperature seems to be fine. Even glasses placed on the lower rack that weren't very dirty seem to have a scum in them when finished. Any ideas?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0629 seconds