Having problems with your Pressure Washers ?

I need to find a MKA 450-30 for a Masport electric waterblaster, The one in it looks like it has burnt out. I am in Wellington, New Zealand


Answers :

I also have a Masport 2000 electric waterblaster (with a MKA30 - 450 Comair motor capacitor). The unit just stopped working, and it would appear to have no power.
\015\012
\015\012Can't tell if the capacitor is burn't out though as it looks and smells Ok!
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to find a MKA 450-30 for a Masport electric waterblaster, The one in it looks like it has burnt out. I am in Wellington, New Zealand


I also have a Masport 2000 electric waterblaster (with a MKA30 - 450 Comair motor capacitor). The unit just stopped working, and it would appear to have no power. \015\012\015\012Can't tell if the capacitor is burn't out though as it l ... Pressure Washers

DD603HSS Hi from France. i'm the owner of F&P dishdrawer DD603HSS for 5 years and half. (New Zealand made) yesterday, the top drawer looks with no power, no lcd , nothing. like no power alimentation. as you know, for a 5&1/2 years appliance, there is no more warranty... have you any idea for the cause of this trouble. is there a fuse and the location of this one ? i know each drawer is autonomous, then i suppose each drawer is protected by a fuse. - i precise "The bottom drawer works fine".


There is only one power supply or input so you need to find out where the power stops from the bottom to the top drawer ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Whirlpool Dishwaser Model #DU8000XX5. Dishwasher won't do anything. Almost as if not getting any power. Was told to check thermal fuse. Noticed some burning around suspected fuse. Ordered new one, but new one doesn't look like old one. Old has 4 connections, new one only has 2. What gives?


... Dishwashers

The dishwasher doesn't seem to have nearly enough water in it. The upper sprayer arm doesn't seem to be spinning when running (I open the door and look really quick) and the lower one looks like it barely spins and barely sprays water. The dishes are barely wet and the soap is just laying on the bottom. The water is on, there are no kinks in the supply line. It sounds like it is running, and pumps pumping, but being brand new I am not sure what it should sound like. It certainly doesn't sound li


I would lift the drain pipe higher. approx. 1/2 the height of the dishwasher . also rechack incomming water supply. Make sure no blockages and the like. Try again. ... Bosch Dishwashers

Maytag dishwasher MDB8951BWB not drying dishes throughly. Have had several Maytag authorized technicians looking at the dishwasher and saying it is operating normal. That because of the mandated energy saving requirements newer dishwashers do not dry dishes like the old ones. In addition, our older set of stainless steel silverware rusted out, my wife bought a brand new fairly expensive set and the new ones are starting to rust. After going through a wash cycle there is a foul smell similar


... Dishwashers

The dishes are not clean when we run the wash cycle. It looks like the water flow from the top sprayer is NOT working. The door, when we open it, has undesolved soap stuck in globs on the top of the door. The top dishes are not clean and some of the botom dishes are not clean. We've run some clear washes to see if we can find the problem. The water flow looks suspect. Is it in the electronics or in the water mechanics. I called the repair guy who ususally comes out and says buy a new one! The re


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... LG 24 in. LDS 5811 Built-in Dishwasher

Our Maytag dishwasher, mod MDB9150AWS, has abad lower rack due to rust and prongs coming loose. Maytag sent me a replacement BUT without the center spray tower. It looks like trouble to remove the old one and install it in the new lower rack. Any help would be appreciated.


Yes, I resolved the problem after thoroughly studying the assembly. It was relatively simple; all I had to do was turn the spray tower 90 degrees and it came free of the rack.\015\012\015\012Thanks for the web site, nonetheless. ... Dishwashers

I have just moved into a new house with what looks like quite an old ADG7540 dishwasher. The detergent dispenser doesn't open during the cycle - even though I have cleaned it. There also doesn't appear to be an upper rotator arm. Should there be one? Does any of this sound fixable?


Hi jo..... many of the old dishwashers did not have an upper arm. Regarding the detergent dispenser there are a couple of reasons why it no longer operates but rather than spend money on a repair I recommend that you simply purchase the 3 in 1 tabl ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

I've had 2 repairmen out for my whirlpool dishwasher (2 yrs old) which is leaving a removeable film on the dishes. White powder, looks like soap. One put in a new soap dispenser (made no difference) the other said it was a hard water problem. Can hard water cause a powder/soap film?


The problem is hard water. www.dishwasherfilter.com has a product that solves this once and for all. very affordable and guaranteed to work. you will love the results. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

I have an Ariston LS245 dishwasher, have just had the pump replaced, as it had shorted out, due to water in the bottom tray where the water detection float is, also a new drain hose fitted. Have just run a wash and after running a while, presumably to the end of the rinse, wash and dry cycle, then one of the cycle phase lights, the one for 'soak' blinks constantly. I switched the machine off and had a look to see if a wash had been done, the dishes look clean. In the book it says that if one


... Ariston Technologies Dishwashers

Cloudy glasses I have a Kenmore Classic dishwasher probably from the early 80's. It works fine except recently my glassware(new glasses) has started coming out cloudy(looking like there are soap spots on it) I have made sure I have the Jet Dry in there and I have even re-rinsed but they still look like that. Any suggestions as to why this is happening? Thank you Rita


Dishwashing detergent will etch fine glassware. Don't wash them in the dishwasher. ... Dishwashers

Maytag My Maytag dishwasher is leaking from the bottom. It is a mdbh940aww. it was never used before. It was wrapped in the plastic wrap when I bought the house in 2005. Now the old one just went and I want to put this one in. It fit nicely, works great but leaks all over the floor. It is level and I check most of the parts. I put a mirror underneath and it looks like the rubber thing isnt looking too good. Do I replace this? If so how?


I also had a mdbh940aww that leaked from underneath. You need to check out where the water is leaking from. Unscrew and remove the bottom front panel so you can view under the dishwasher. Start up the dishwasher and using a flashlight see where th ... Dishwashers

I recently purchased a Dewalt DXPW 3835 Pressure Washer from Home Depot.... After 4 hours use I no longer get any pressure. After depressing the trigger, I get a second of pressure and then it just dies. I called DeWalt and they couldn't help and to take it to the Warranty Shop. They informed that they wouldn't be able to look at for 2 weeks so I took it back to HD and got a new one and this one does the same thing. I'm pretty sure it's probably a pretty quick fix but no one seems able to te


... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure

Maytag mdb8600 I am replacing the latch mechanism and have 3 wiring connectors. Not sure how to connect them back to the new latch. The first one has 4 white wires, the second one has 4 black wires and the other has 2 black and one purple wire and attaches near the top of the door....I was looking for a wiring diagram but hoping you might be able to help


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

We need to replace the locking ring in the bottom of our Asko 1716 dishwasher.(It's cracked) I can only find one kind of replacement ring for that,but it looks like the right size. I need to know if Asko uses one ring for more than one model of dishwasher?It's a 5" locking ring for the bottom well of the tub. Thanks for your help!


Only 1 size ... Asko D1716 Built-in Dishwasher

Dishwasher started smelling funny like electrical smoke. I opened up the top by the digital read out and noticed one of the wires was charred and had been smoking. worth it to call repairman? or buy a new one.


I would call a repairman or just cut out the bad spot in the wire and use a **** connector and splice in some new wire. Maybe a new connector because it may have been caused by a loose connection drawing heat due to arching. I doubt its a major issue ... Kenmore 24 in. 15079 Built-in Dishwasher

Main wash door won't open on whirlpool model du810swkqo recently bought new home with new (?) dishwasher but it looks like the main wash door (where the soap goes) doesn't have room to open. any suggestions?


The cover is spring loaded. manually open the cover and pour some really hot water by the hinge, manually open and close few time, onec it is loose, put few drop of machine oil and work it again. ... Dishwashers

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers

My Kenmore dishwasher, about 5 years old, is not cleaning well any more. Glasses look cloudy,and I assume the bowls and plates are not clean also, but that's harder to detect unless I hold them up to light. I use a rinse agent. What's the problem? Is it worth having a service person look at it or should I just get a new one? It's a Kenmore Elite ultra wash dishwasher.


Although I used my credit card to pay for the live chat, it bounced me out before the service person could respond. So I tried another service and two people who do home repair told me what the problem was and what it would cost to fix it. Since the ... Kenmore Dishwashers

Kenmore model#587(Frigidaire) leaks under door. New install. Had machine for a year plus before install. took off front panel- can see water squirting past lower door gasket as wash arms rotate. cause is water running down door during wash cycle piles up in the channels molded into the lower left & right side of the wash tub and pushes out the sides of the lower gasket. looks like a design issue- called SEARS, they just want to sell me a new gasket! go figure. any ideas on a fix?


It does sound like an inner door seal ,however If you get upset at Sears and complain they may help you as they say the squeaky hinge gets the oil..And with Sears the more you squeak the better your chances of results ...Good Luck ... Dishwashers

I recently bought a different type of dishwashing detergent for my Frigidare dishwasher and my dishes look as if they have not been rinsed. They cycled all the way through the drying cycle so the detergent dried on and was difficult to remove. I would like some advice on whether this sounds like a detergent problem or mechanical problem before I try another load. This washer is not new. It was in the house I bought and I've only been using it for about 2 months. (I usually use Casade Liquid and


The best way to use your dishwasher is the way it was designed.\015\012if your unit has a compartment for jet dry or rinse agent then you should add and fill that compartment with rinse aid. try not to buy soap with any extra like soap with jet ... Dishwashers

I have just bought a neff dishwasher off ebay, looked identical to my broken one. the outlet hose on original was just a hose. the new one has some kind of gizmo on it. what is it, and can i just cap it off


Hi,\015\012 If the little Gizmo is on a portable ... then its a water release like mine. On mine it takes a quick release nipple that you hook to the faucet. On the hose end there should be a coupler with a button to release the water p ... Dishwashers

Hello, My husband bumped into our Bosch dishwasher door when it was open. It won't close now, one side is about an inch higher than the other. Also the inside of the door (not the hinge) looks bent. What can we do? Can a repairman fix the door or do we need to get a new one?


THE DOOR NEEDS TO BE RESET IN ITS POSITION.THAT A REPAIR MAN CAN DO BEST YOU GET THE AXPERT IN TO ASSIST YOU.\015\012\015\012GOODLUCK.\015\012\015\012MOHAMED ... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1202 seconds