Having problems with your Pressure Washers ?

My jcb pw8tss presure washer lance has broken can i replace it with any brand is so can you recommend

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My jcb pw8tss presure washer lance has broken can i replace it with any brand is so can you recommend

... Pressure Washers

Blanco BFDWC65X dishwasher. Has broken handle. Have been informed that the handle cannot be replaced and that the whole front electronic panel needs to be replaced. Is this correct? Can you recommend a repairman in Brisbane?

Hello. Generally the handle can be replaced or repaired with epoxy. Call the local appliance stores as they have lists of local repair persons. Try to get one familiar with your dishwasher. J. ... Dishwashers

The dishwasher is not working. When the cycle is finished the dishes are still dirty and the soap is lying in a pile at the bottom of the washer still dry. It is a GE Medallion 850 Model#GMB8240KD119. how old is this model? Do you recommend fixing or replace?

The float switch may be the problem so open it up and clean it. Debris can cause the float to stick in the raised position, which prevents the tub from filling which appears to be your problem. If the water doesn’t reach the right level ( ... Dishwashers

Dishwasher won't drain. Water in bottom of tub. Washer hooked up through disposal, which was broken and just replaced. Currently, sink and disposal work fine but now tub of dishwasher won't drain. 24" stainless built in Model GLD6360L00SS

Hi\015\012\015\012\015\012Thanks for using FixYa. Hope you\015\012know that new disposals ... GE 24 in. GLD6360LSS Stainless Steel Built-in Dishwasher

I have a GE dishwasher (purchased in1992) the door falls open I suspect a broken spring. I looked all over the door hinge and cannot locate a spring(s). Where are they located. Also because of the age would I be better off to just replace the washer?

... Maytag Dishwasher

My neighbor just gave me a Troy Bilt 020207 power washer. It is 2450 PSI and 2 GPM. He snapped the pull cord rope. I looked at the pull cord cover and it seems to have 3 rivets holding it to the main housing. How do you recommend to repair or replace the pull cord?

Sounds like a briggs engine, DONT remove the rivits, go down a little further and remove the 4 3/8 bolts that hold the blower housing on.Turn it upside down, prewinf the pulley in the direction that it turns when the rope is being pulled. When it sto ... Briggs & Stratton Pressure Washers

Does not get dishes etc. clean no matter how loaded. Must pre-wash by hand to get all food off or will not come out clean. Why have a dish washer? Is there any secret to how to get it to clean? Or do we give up on this thing and replace it. Only 3 years old. Any recommendations? We assummed the newer dishwashers would not need pre-rinse by hand but would clean.

Hi,This is a good washing machine if it is working properly. There could be a couple things that have happened to make this not work well. You should not have to pre-wash or rinse anything, just scrape and load. First thing is ... Whirlpool GU2400XTP Built-in Dishwasher

Assembly I recently purchased a pressure washer from Home Depot. It is rated at 3100 psi. It is a comet pump with a honda gas engine. The assembly instructions recommended that I remove the plug on the top of the pump and replace it with a vented plug that was provided. However, none of the other enclosed manuls talk about the vented plug. Am I reading the assembly insturctions correctly. Should there be a vented plug ?

HI your machine would have been delivered with a blanking plug in the pump. You will need to remove this and fit a vented pump or your pump will build up too much pressure inside. ... Comet BXD2527 Pressure Washer Pump

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo

My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

Karcher Power Washer, I think (K1) water outlet broken completely off. Can I replace it?

If you find out what the id number of the machine that looks like 1.xxx-xxx.0 it will be on a silver plate. I will be able to tell you for sure but normally you can easily replace them and it isn't very expensive to do so. ... Karcher Pressure Washers

Have a homelite 1700 pressure washer with broken two mixture spray handle. What do I replace this handle with?

... Pressure Washers

Found this presure washer in the basement and want to know if it works the motor runs when you plug it in but does not build press. The brand is kew hobby

This may be as simple as still having air in the system.  Connect the machine to the water supply (but not the electric) then squeeze the trigger and allow water to flow for at least 60 seconds.  During that process, hold the nozzle outlet ... Pressure Washers

Galaxy Dish washer soap dispenser door not locking after technician replaced timer? Dial has a broken tab to hold it in place, superglueing to see if this is the problem.

... Sears 24 in. 14181 Built-in Dishwasher

I have a McCulloch FFH18A power washer and my adjustable nozzle is broken and I can't find a replacement anywhere?? Do you know where I can purchase one??

... McCulloch Pressure Washers

I have a Karcher 550M pressure washer and was using today when all of a sudden the water started to pour through the handle hence lost the pressure of the water. Is this a rubber washer issue or the gun needs replacing or simpler than that. To be honest although I have had the washer for about 3/4 years now It is hardly used. Also can I fix it and where would I purchase the allen key to replace. Thanks Brian

... Karcher Pressure Washer Gun 91120200 91120200

I have a GE DISHWASHER model #GSD2100R20BB. The motor/pump mechanism has been replaced with a brand new one from GE, The water valve and timer have been replaced with brand new ones from GE and the dishes on the top rack are still not getting clean, can someone point me in the right direction here; please?

Have you looked at the spray arm itself? sometimes over use the spray hole get clogged with debris, clean it and then check the return water filter for debris. clean the filter and check in the hole under it that feeds the pump. ... Hotpoint Dishwashers

How to replace inlet elbow on a model k360 karcherressure washer

... Pressure Washers

Homelite presure washers wy my presure washer only start if i put a litle bit of gas true the carburator but dont stay on

Sounds to me like some of the jets in the cab are plugged remove the carb and clean the jets and passages ... Pressure Washers

Replacing a broken component on my McCulloch FH180B

Mc Culloch service centre Check the phone books pages in your country of origin ( or on the net). Your local hardware or distributor should be able to direct you to the service centre. Cheap part ( $5) but they have a minimum labour cost of $1 ... McCulloch MCCFH180B Electric Pressure Washer

Frigidaire built in dishwasher model PLD2855RFC1. Have to wash dishes pretty much spotless prior to using dishwaser. Glasses come out with what appears to be soap residue regardless if powder or liquid. Did not use a gauge but water pressure in rest of house is good, recently replaced water heater, pressure regulator and just replaced the dish washer water source valve. Washer is about 18 months old, has never worked really well.

Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Frigidaire PLD2855RFC Dishwasher

I have a Honda xr2600 power washer. When I tried using it, water was squirting from the top of the gun. I took it apart to find that there are o-rings on top of some kind of washer---looks like a lock washer but it's made of cardboard??? Two of these washers were broken. I can get the o-rings but I can't seem to find the washers. I tried getting the manual for this model on line with no luck. Any assistance will be greatly appreciated.

The washers that you describe are made of teflon and are split to facilitate installation and/or allow expansion as they wear. These washers are actually seals and at times are used together with orings to seal high pressure. You should ... Honda Pressure Washers

Whirlpool dishwasher part #3385181. Machine had gone thru wash cycle and was starting to dry. Smelled electrical burning smell, opened washer door and washer was filled with smoke. Turned everything off, cleared smoke, and the washer water dispenser is very hard to turn. Washer has symptoms of burnt up motor that turns water dispenser. Machine is 12 years old. With cost of replacement motor and possible part (pump?) that might have clogged and caused motor freeze up, is it worth fixing or junk

... Dishwashers

How do you remove the plastic internal fitting from the casting to replace the water inlet elbow on a karcher 440 power washer

... Karcher Pressure Washers

How to replace on-off switch on karcher 3.86m pressure washer?

... Karcher 1750 Psi Elec Pressure Washer

Dish washer Hi there, Last time I started my dishwasher, clear water spilled out in a large amount. We pulled the washer out to realize some plastic parts underneath had totally smashed down. Is it possible to replace those parts, or do I need to buy a new washer?

Yes youcan replace them just give dishwasher name ? ... GE Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0921 seconds