Having problems with your Pressure Washers ?

How do i fit the detergent bottle to the lance on my challenge model no.mh02-1610go pressure washer


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i fit the detergent bottle to the lance on my challenge model no.mh02-1610go pressure washer


... Pressure Washers

I have a DeVilbiss pressure washer, Serial# 2251136878, Model# WVRH2421, Radial Pump# D28703, with a 5.5hp honda motor. It has no pressure. If the pump can't be fixed, is there another brand of pump that will fit this model pressure washer?


THE PUMP FITS THE MOTOR and the pump i always use is a ROYALPUMP made in Italy and they are long lasting and easily serviced ,any of the Italian pumps are good ... Pressure Washers

My TroyBilt Pressure Washer 2500 PSI 2.3 max gpm will not pull detergent through the tube. I have the correct tip on the nozzle and the tube connected to the pressure washer and in the bottle of detergent but I'm getting nothing. Any ideas? Thanks! -Carson


If you follow the chemical hose back to the pump it will be attached to a barbed nipple, behind the nipple there should be an o-ring, spring and a ball.A lot of the time if you are using the proper nozzle in the low pressure setting and still c ... Briggs & Stratton Pressure Washers

I have a Pressure problem on my PowerCraft pressure washer. On initial switch-on the machine runs at low pressure. If I then rotate the end of the lance to detergent application mode and then rotate it back to high pressure mode the high pressure kicks in and all is well. Is the lance faulty?


... Pressure Washers

Campbell Hausfield Pressure washer model 1549. After a few years of storage, I cannot prevent the powerful spray leaking from the connection between the Gun and the Lance. I replaced the O-Ring, and tried other means unsuccessfully. Spray from the joint is almost as powerful as spray from the lance nozzle. The Briggs and Stratton engine has been cleaned and operates well. The pump operates well. But the lance connection refuses to seal.


Hello,Most likely, the housing has split and seal is not being made. There is a chance that the hose is leaking where the fitting is crimped on (my experience, but different pressure washer). Are you able to see a leak when turned off b ... Campbell Hausfeld Pressure Washers

I just bought a Dirt Devil Pressure Flex 1600 Power washer but the instructions are horrible. I'm trying to find a manual that indicates how the detergent bottle attaches. I attached it like it looked like it should go but it basically dribbled out with no pressure.


... Pressure Washers

It will not take the chemical/soap in the pressure washer? I have checked both ends on the chemical hose and both seemed to fit tight on recievers. Then I checked and did not see where it was pulling air in the hose to keep it from pulling from chemical bottle. This is a brand new washer. Am I doing something wrong?


... Pressure Washers

Honda pressure washer won't pull chemical. Line is not kinked. Removed intake fitting anf checked for clogs - not clogged. Appears to be drawing but not enough to pull the clorox bleach from the bottle. Using the soap fitting so that's not the issue either.


... Honda 2500 PSI Gas Pressure Washer

I have a Karcher 3.99 Pressure Washer. The motor appears to be working and water is passing through the machine when turned to the detergent application setting. However when the lance is tightened to turn on the pressure, no water is coming through. The Karcher is just over 1 year old David


Hi I have a karcher 3.99 the motor comes on and water comes out however thre is no pressure i have tested the lance on my brothers washer and this is ok what is wrong ... Karcher K 5.85 M Electric Pressure Washer

Rockworth Powertask Pressure Washer : model no AROW4P seems to rev flat out, hav to put choke in middle to use so not to fast revs. Im sure it used to rev higher and lower according to use of lance. could it be something to do with 3 valve things if so how could i tell if ok. put clean fuel in. oil level ok.another problem is when switched on water comes straight through lance,trigger makes no diffrence. please help


... Pressure Washers

Karcher 5.5 model pressure washer . powers up and motor runs but not pressure at lance?


... Alfred Karcher K 5.93 M Electric Pressure Washer

Greenworks pressure washer - can't separate wand to attach detergent bottle


... Greenworks 1500 PSI 1.3 GPM Electric Pressure Washer 51142

Parkside pressure washer not sucking detergent from bottle


... Pressure Washers

I have a Craftsman pressure washer model 580.752020. I ordered a pressure hose according to the manuals parts list (203961GS) but does not match the original hose I removed from the washer. A hose #31


... Craftsman Pressure Washers

I have a campbell hausfeld pressure washer without a manual. The model is PW1755V3LE. I want to know exactly where the port is for using chlorine or detergent. I'm not sure I see one. Can you help me?


You won't see one. You can not pump chlorine or detergent through the \015\012pump. What you can do is get an injector kit which will siphon solution into \015\012the discharge from the pump. The problem is that it will be at low pressure. \015\ ... Pressure Washers

I need a new lance for my pressure washer model KSM i am in caloundra qld need to know anybody in my area who may hold spare parts


... Comet Pressure Washers

Karcher k3575 pressure washer not taking soap from bottle to lance


... Karcher Pressure Washers

My Durabuilt power washer model #D81404 blew apart where the hose connects to the gun. I think I just need the copper fitting that connects the gun to pressure hose. Can you help me?


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Champion CWP1600w pressure washer MK2 but drain hose for MK1 Can I get adapter Bayonet for old hose to fit newer model CWP1600w


... Pressure Washers

Newish Nilfisk P150.1 Power washer won't lift detergent from bottle. I have stripped the hose /pump fitting and the ball and spring are in good condition and the calibrated hole is clear ! The regulator valve is also clear and in working order.


Do you have it set to low pressure to dispense soap? ... Pressure Washers

I have a simpson cleaning system pressure washer, the t brass fitting is broken off from the pump, where can i buy one. it is a starier 1500 by glidden model m-1500 crs also on the frame is 3400, 1500 and 140f. has a wisconsin robin wi-85 engine.


... Simpson Pressure Washers

How do I attach the detergent bottle to the pressure washer to use now


... Campbell Hausfeld PW1750 Electric Pressure Washer

HI:MY NAME IS GERALD AND I HAVE A DURABUILT PRESSURE WASHER ,AND I AM LOOKING FOR A PART IT IS A QUICK COUPLER THAT FITS A MODEL DB1404 1400PSI 1.6GPM. DO YOU CARRY THIS?


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Why is my pressure washer not pulling the detergent in the injectors the model is a jet usa 7 ohp 3800psi .I am droping the fillter end into chemicals but it does not pull it into the pump ???


Dont have the right tip on ... Pressure Washers

Cannot fit lance to karcher B102 - Pressure Washers


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1523 seconds