Having problems with your Pressure Washers ?

Where can i buy repair parts? - Pressure Washers


Answers :

Find a pressure washer vender in the yellow pages. It doesn't have to be a karcher dealer. Take it to them and show them what you are trying to accomplish. They can usually set you up with generic parts that will work just as well or better. Parts like hoses, trigger guns, lances, spray nozzles etc are really generic anyway. That's why there are no part numbers.

Also, stores like Home Depot, Lowes, Sears etc usually maintain a small section with these generic bits n pieces. I hope this is helpful to you and gets you pointed in the right direction! And good luck! Rate me if it has helped you. Thanks!
Don
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where can i buy repair parts? - Pressure Washers


Find a pressure washer vender in the yellow pages. It doesn't have to be a karcher dealer. Take it to them and show them what you are trying to accomplish. They can usually set you up with generic parts that will work just as well or better. Part ... Pressure Washers

Looking for manual for honda pressure washer,its a GX 340 11.0 HP that I can view online without buying so I can find the part and part number


Go to this page: \015\012\015\012http://www.jackssmallengines.com/help.cfm\015\012\015\012You must have your exact engine model number lis ... Honda Pressure Washer PSI 3000

How to buy parts for a honda generac 6.5 hp pressure washer


... Honda Pressure Washers

My Karcher 2.94 pressure washer has stopped pumping water through. It was only £80 and is 3 years old is it worth repairing if it needs new parts etc.


... Karcher Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

Hi - I have a McCulloch pressure washer Hidromac 1300. It still works brilliant but the wand is broken at the tip - is there anywhere i can buy this part? thanks graham


Hi Graham. Welcome to FixYa. I am Kelly. \015\012\015\012This appears to be sold by Electrolux. Their manual is for the Hidromac 1000/1300. The only parts that I can find are here: \015\012\015\012 ... Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

How to repair the detergent dispensor on Troy bilt pressure washer with new parts?


... Pressure Washers

Need to buy part 41 for McCulloch FHH 18A - McCulloch FHH18A Electric Pressure Washer


... McCulloch FHH18A Electric Pressure Washer

Where can I buy parts for a McCulloch model FH130B Electric Pressure Washer?


... McCulloch Pressure Washers

Is it possible to buy replacement parts for a 204627 gs pressure washer gun???


... Briggs & Stratton 204627gs Pressure Washer Gun Up To 3000 Psi

The power washer leaks fro the base when pressure is applied. I removed the bottom housing and the round gasket that houses the bearing is badly damaged. I would like to obtain a repair manual and possibly order some parts. email [email protected]


... Pressure Washers

Need a parts manual and preferably a repair manual for a Stihl high pressure washer model RE250K. It has a water leak and previous owner donated unit to me saying he has spent enough money on it and now it has this leak. I am a qualified automotive mechanic amongst other things and would like some guidance; otherwise I will go in blind. Thanks. Bob Hudson Sydney Australia.


... Pressure Washers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

How to repair a hole in the wand tubing for pressure washer


My Honda ic2 ran greet, then all of a sudden it started to slowly shutting down,i restarted it. and it ran for about 5 min and shut down. i did this 3thee to four times do i need a gas additive or what ... Pressure Washers

My Karcher K3.48M pressure washer remains in the low pressure mode even when I return the pressure nozzle to the high pressure position. How can this be corrected. The pump seems to build up the pressure because when I release the handle the pump motor stops. This is a fairly new pump which was purchased in the latter part of last year(2010). Could this have been caused by the detergent I have been using which is an automotive shampoo? Please help I love this washer and for the times that I u


... Karcher PSI Electric Pressure Washer

I have a Husky gasoline pressure washer. The honda motor starts but stalls because the pressure by-pass (not the right term) doesn't seem to open and builds up pressure. I haven't tried to remove any parts yet. I think grit has got in but don't know for sure. The pump looks pretty simple and the part I want to remove for cleaning looks like a plastic hexagon nob. Will this access the by-pass or is it something else.


I think you're right about the knob, but try this:Open the water to the washer. Leave the line open, and hold the trigger down to get all of the air out of the supply and discharge lines. While still holding the trigger down on the spray gun, ... Pressure Washers

I have a 4,000 psi, 4.5 gpm 45G cat pump powered by a 13 hp honda engine I can not seem to be able to adjust the unloader valve to give me pressure over 950 psi and even at lower pressures, the pump will not deliver consistant pressure without bouncing off to the relief stage and back into the tank Are unloader valves worth repairing, or should i look at just buying a new one my current thought is to buy an EZ start Pulsar


I would just purchase a new unloader valve, they usually aren't worth rebuilding. I would like to have a picture of the set up that you have, if you can send me a picture of the unloader region of the pump I can get you are price on a new one. email ... Honda Pressure Washer PSI 3000

Dish washer Hi there, Last time I started my dishwasher, clear water spilled out in a large amount. We pulled the washer out to realize some plastic parts underneath had totally smashed down. Is it possible to replace those parts, or do I need to buy a new washer?


Yes youcan replace them just give dishwasher name ? ... GE Dishwashers

Where would I find availability of parts in QLD Australia to suit a pressure cleaner 3200 psi coupled to a Briggs & Stratton motor pressure washer number 020225-0 part required chemical injection kit FIG E on general assembly part number 192914GS


Wayne, Any Pressure Washer dealer should be able to sell you what is called a "Down Stream Injector". What you need to know is the flow rate. Like, at low pressure, see how many Gallons/Liters Per Minute actually comes out the wand. That i ... Briggs & Stratton Pressure Washers

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

I have a Craftsman pressure washer model 580.752020. I ordered a pressure hose according to the manuals parts list (203961GS) but does not match the original hose I removed from the washer. A hose #31


... Craftsman Pressure Washers

I have had 3 Karcher pressure washers all experience the same problem and so have two of my neighbors. Our area has very hard water and it causes problems with the washer not bringing up the pressure when the trigger is pulled (or surges up and down) and the nozzles clogging, etc. The service repair facilities cannot tell me how to prevent this. Many attempts to contact Karcher for advice have been ignored. I have been thinking that perhaps running the engine for a few seconds with no hoses a


If your water is that hard (and it appears it is) WD40 will NOT solve the problem. You should look into a water softener. However, chances are that a small, inexpensive model will not have the flow capacity required for a pressure washer. You'll like ... Karcher K2.26 Electric Power Washer

Calgary, AB - McCulloch Pressure Washer FH180B casing is cracked, where can I find the parts and how much to replace it, or should I purchse a new pressure washer.


... McCulloch FH180A Electric Pressure Washer

Pressure washer repair - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1101 seconds