Having problems with your Pressure Washers ?

Pull cord replacement on a husky pressure washer

\015 Looking for instructions on replacing the pull cord\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pull cord replacement on a husky pressure washer


... Pressure Washers

I have a Husky pressure washer with a Honda 2600psi engine. Problem is, no water will come from the pressure hose. I connected the water w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help.


Check the quick disconnect to the wand these are spring operated and can get stuck ... Pressure Washers

I have a Husky 2600 PSI pressure washer. Started up and used for about 20 minutes - turned off to take around back and now the pull cord is tight and has a clicking sound when trying to pull. Has oil and fresh gas. Suggestions?


... Karcher Pressure Washers

Husky 2600 pressure washer--pull cord locks up


... Honda Pressure Washers

I have Honda pressure washer.Inorder to start the pressure washer you have to pull the cord. THe cord is stuck and I am not able to pull the cord. Why it and what should I do to start the washer.


... Honda 2500 PSI Gas Pressure Washer

How do i replace a pull cord on a xt7 pressure washer


Try this link:http://www.youtube.com/watch?v=Q3NjVomUQJMThere are others there as well.Best regards, --W/D-- ... Psi Blue Max 2200 High Pressure Gas Power Washer

Replace pull cord model g23 - Pressure Washers


... Pressure Washers

How do you replace the pull cord on a dewalt 3750 psi pressure washer


... Dewalt 3700 Pressure Washer

How to replace pull cord on a craftsman gas pressure washer


... Craftsman 2700 Max Psi Pressure Washer 23 Max Gpm

Briggs and Stratton pressure washer will not start. I have a 6.75 hp pressure washer that is only a year old. when I pull cord it turns over but does not start. I changed plug and checked it, I have spark when pulling. I have 40-50 psi of compression when pulling also. gas was drained and is brand new. it was working fine last time it was used. I have tried starting it without the water line or spray wand hooked up and no difference. After about 10 or 15 pulls, can smell gas when I am trying to


Hello dave, the problem is compression to low,you need 60 to 130 lbs to run engine,check for blown head gasket,or bad rings,or a stuck open valve,hope this helps,, ... Briggs & Stratton Pressure Washers

My neighbor just gave me a Troy Bilt 020207 power washer. It is 2450 PSI and 2 GPM. He snapped the pull cord rope. I looked at the pull cord cover and it seems to have 3 rivets holding it to the main housing. How do you recommend to repair or replace the pull cord?


Sounds like a briggs engine, DONT remove the rivits, go down a little further and remove the 4 3/8 bolts that hold the blower housing on.Turn it upside down, prewinf the pulley in the direction that it turns when the rope is being pulled. When it sto ... Briggs & Stratton Pressure Washers

Very Hard to Pull Cord to start engine on Northstar Pressure Washer. When I remove spark-plug it is very easy to pull cord. With plug reinserted it is extremely difficult to pull cord to start engine.


On the Honda motors very hard pull starting with no start ck for broken rocker on exhaust or intake, I've already repaired two with this problem...... ... Northstar Pressure Washer 3000 PSI

I have a Briggs and Stratton power washer Quantumpower 5hp water driver series 1750 PSI 2.0 gal min model # WGV1721 . I got it used and it was always a bit hard to start but always started. Pull cord frayed and broke I bought new cord and a neighbor replaced for me. Now it does not want to do anything when pulled. I can't get top cover off that has screws with round holes instead of phillips or standard slots to get to pull cord winding


Spray well with WD-40 or similar, and take a small chisel, on it's edge, and hit hard enough to allow chisel to dig in to head of screw, making a "V" like slot in the head, then angle chisel slightly and start tapping in direction of loosening(counte ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Replacing a recoil cord on a Honda engine for a pressure washer


... Pressure Washers

Wgvb2122 pressure washer builds pressure until you pull trigger, then no pressure. Replaced seal kit on plungers, same thing! Replaced unloaded assembly, same thing! Every thing seems to be as it should be and clean. Any ideas before I shoot this machine?


... Pressure Washers

Just bought a jet usa 7.0HP 3950 PSI pressure washer, put it together and put oil in it and i cant pull the pull start cord out at all?


... Pressure Washers

Cannot pull start pressure washer. Cord will not


Cord will not extend past 3 inches; just shut down after last use after 30 seconds. ... Pressure Washers

Exha 2425 pressure washer pull cord jammed - Northstar Pressure Washer 3000 PSI


Remove the cage and see if the spring has jammed. ... Northstar Pressure Washer 3000 PSI

I cant pull the cord in my pressure washer it feels like it stuck thiere is no pressure in it it wont pull


Take the sparkplug out and see if you can pull the cord then. If fuel comes out of the sparkplug hole the carburetor is leaking gasoline in to the engine filling up the cylinder causing the lockup. The carb has to be rebuilt. Another problem mice lik ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Pull cord broke on my xr2500 pressure washer - Honda Pressure Washers


... Honda Pressure Washers

Pull cord stuck on my pressure washer. - Briggs & Stratton Pressure Washers


Need to remove assembly to find problem. ... Briggs & Stratton Pressure Washers

Pull cord won't pull out on my power washer - Honda Maxus Pressure Washer MX5222


... Honda Maxus Pressure Washer MX5222

Troy bilt pull cord pressure washer recoil - Pressure Washers


... Pressure Washers

Incomplete recoil on rigid sp 170 pressure washer pull cord


... Pressure Washers

Can'r pull the cord on my pressure washer. it seems to be ceased.


... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0729 seconds