Having problems with your Pressure Washers ?

Oil for Troy built pressure washer model 020207


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Oil for Troy built pressure washer model 020207


... Pressure Washers

New honda pressure washer maybe had it 2 years and only has about 3 hours on it, I was using it yesterday and it started fine and after running for about 10 min it shut down like i turned the kill switch, it has oil and gas but seems to have lost compression. It is a Honda overhead cam GCV 160, pressure washer is a Troy Built model


... Pressure Washers

Troy Built pressure washer starts up fine and idles nice. Start spraying and everything is fine for about 30sec to 1min then the engine just shuts off. Seems like pressure is building up and choking the engine out. If I dont spray it will idle all day long. I have cleaned the unloader area, still shuts off. I have the pump off the machine, what should I do? Model number 020208 Troy Built. Rev # 01


... Pressure Washers

I have a troy build pressure washer model number 020337 Do I need to change the oil in the pump, and if yes how do I drain it and what kind of oil. I know how to change the engine oil


The pump requires no maintenance and no oil change. It is lubricated for life. ... Karcher 2500 PSI Pressure Washer

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

I have a troy built 2450 pressure washer. The engine runs fine but I have no pressure out of the hose. Does the pump require that you put oil in it?


Do you live where it is cold in the winter? And did you winterize the pump this past winter if it is cold? They need to be winterized or pump damage can occur. ... Pressure Washers

Troy built 2550 pressure washer pump oil amount


... Briggs & Stratton Pressure Washers

Oil is leaking from bottom of Troy Built pressure washer


... Briggs Stratton 198347gs Pump Assembly Kit For Pressure Washers

Troy built pressure washer model 020209


... Briggs & Stratton Pressure Washers

How much oil goes back into a Troy built quantum 6.5 hp pressure washer


... Pressure Washers

Do you mix oil and gas with troy built pressure washer?


... Honda Black Max 2600 PSI Pressure Washer

I have the 2600 psi pressure washer from troy built and I'm unable to find the model number and sn


... Pressure Washers

My troy built 2200 pressure washer was running fine but then shut off instantly I then noticed it had low oil I filled it but now it won't start


Pressure washer takes oil in two places:Pump oil is 20-30 weight SAE non detergent and comes half way up/ do not fill more than 1/2 way ... Briggs & Stratton Pressure Washers

Where do I put oil in a 3000psi 7 HP Troy Built Pressure Washer?


... Briggs & Stratton Pressure Washers

We have a troy built pressure washer model 2700. What is the ratio on soap to water that it dispenses?


... Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

Troy built 2350 psi 2.0 gpm. pressure washer. starts onne then dies. will not start again. has briggs and straton motor. has been sitting up for the winter. have changed spark pulg. checked air filter that is clean, has oil and gas.


... Pressure Washers

I have a Troy Built Pressure Washer Model # 01903. It has snapped a bolt off in the pump head area and is leaking H2O. What is the part number of the repair kit for this problem and where can I order it??


... Pressure Washers

What oil to use for a troy bilt power washer model # 020207


... Pressure Washers

How much oil goes in a troy built 1903 pressure washer pump


... Pressure Washers

Troy built pressure washer engine timing


... Briggs & Stratton Pressure Washers

A customer has dropped off a Devilbiss pressure washer and it can not hold the oil becuase it is missing the bung ( oil cap). Do you know if you can assist with one. I live in New Zealand, so do you have a distributor here. It is A Devilbiss Pressure Washer, model WVG 1721, serial # 172165049. Thank you Alex Smith


... DeVilbiss Pressure Washers

Where is the oil plug located on a 2450 psi troy bilt pressure washer


... Pressure Washers

Troy Bilt Pressure Washer Model 01902 Leaking Gas from Air Filter


Try banging lightly on carberator with block of wood or something to free up float and valve!!!! ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

My Troy Bilt power washer (using Honda GCV160 engine) has no pressure coming from the pump. I checked the water flow, everything seems fine. I believe the pump needs oil added, however, I can't seem to firgure it out (how to add oil to the pump). I did notice that previously, I used to see drops of oil coming from under the pump. I I have a bad seal, can I add oil and test the pressure before I change the seal? Please advise.


I had a similar problem. Turns out I had left the hose disconnected and some sort of wasp built a paper type nest inside the washer tube that the hose connects to. I had to take the pump off and take apart and then cleaned it out with a screw driver. ... Honda Black Max 2600 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0952 seconds