Having problems with your Pressure Washers ?

Water coming out at handle on the lance

\015 I have a Clarke ELS 150 Power Washer and since bringing it out of storage in the garage for the last 18 months it has lost its pressure and\012water coming out at handle on the lance. Anyone any ideas, its never been used much?\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Water coming out at handle on the lance


... Pressure Washers

No water pressure coming out while ingine is running. hoses/ attachments not clog. Pulled and opened pump, didn't see anything broken although noticed pump was filled with oil/lubricant but about 1/4" below top surface. Is it suppose to be filled to the top? What kind of oil is used on the pump? And how come there's no water pressure coming out while the motor is running and handle trigger engaged?


If you can find the model # then you can call tech support for free advise.\0121-888-279-9274 ... Karcher Pressure Washers

When the washer is fitted up ready to use the water comes through the handle ,i took the end piece off ,the water then comes through to where the end piece fitted on,when i looked through the end piece i can see straight through so it doesnt seem to be blocked with dirt ect


Check o rings washers ... McCulloch FH160G Pressure Washer

Karcher 3100 pressure washer, motor runs fine but when I squeeze the trigger on handle, high pressure pump won't come on unless I remove tip and water is coming out of wand without restriction. Help anyone have any ideas? It did come on once but when I let go of trigger it wouldn't come back on.


... Alfred Karcher Quick Connect Nozzles 2600 3100 Psi 5 Pack

My Karcher high pressure cleaner K 2.180 is not working. When connected to power and water there is water coming out of the lance but it is similar to the pressure of a garden hose and there is NO noi


... Karcher Pressure Washers

I have a Karcher 3.99 Pressure Washer. The motor appears to be working and water is passing through the machine when turned to the detergent application setting. However when the lance is tightened to turn on the pressure, no water is coming through. The Karcher is just over 1 year old David


Hi I have a karcher 3.99 the motor comes on and water comes out however thre is no pressure i have tested the lance on my brothers washer and this is ok what is wrong ... Karcher K 5.85 M Electric Pressure Washer

Karcher K4 Hello, just cleaning my patio been using it for two days and it has stopped pressuring up, water comes through the lance but there is a humming noise coming from the unit when switched on, weather the trigger is pulled or not. Thanks for your time hope you can help. Regards Gareth


It sounds as if you might have an air lock/air bubble in your pump circuit. If you've not already done so, try holding the trigger on your high pressure nozzle for several minutes with the engine OFF. (just your water pressure forcing water through t ... Karcher 2500 PSI Pressure Washer

Have a Karcher kb4040 that continues to run constantly even when the trigger isnt pressed. Also water flows out of the detergant hose when im not pressing the trigger. Pressure seems down slighlty, not much. This happened after i ran water out of trigger gun with no lance attached, machine switched on. Seems to leak from trigger handle aswell. Many thanks in advance


This is two things. One is the back flow check valve to the soap line is leaking. The other is the pressure switch on the output side of the pump. ... Pressure Washers

Faucet has barley any water coming out- I have tried removing the spout and issue still persists. I think the issue is with the handle you use to turn the water on/off and hot/cold. How do I fix this?


Sound like the screen in the end of spout is clogged. just remove the end of the spout where the water come out, is should screw off it has a screen in side. clean it off and make sure the holes or open and replace it. ... Dishwashers

Hi I have a brand new Honda Power washer GC 160,2600 psi 2.3 GPM my husband taught me how to use it last night and I think I have followed all of steps: 1. hose free of kinks 2. connected to machine 3. purged pw handle of air and made sure water from house coming through 4. pulled out choke 5. turned red button to "ON" position 5. pulled T handle enging starter and it sounds like it will start but doesnt what am I doing wrong??? yes it does have gas in the fuel tank.


... Karcher 2500 PSI Pressure Washer

Rockworth Powertask Pressure Washer : model no AROW4P seems to rev flat out, hav to put choke in middle to use so not to fast revs. Im sure it used to rev higher and lower according to use of lance. could it be something to do with 3 valve things if so how could i tell if ok. put clean fuel in. oil level ok.another problem is when switched on water comes straight through lance,trigger makes no diffrence. please help


... Pressure Washers

Water does not come out of the lance when I squeeze the trigger


HI it sounds like you may just have a blocked jet on the end of your lance. Please remove and clean. ... Northstar Professional Series Pressure Washer 4000 PSI

Hi, my Karcher steam cleaner is working ok apart from the burner does not come on to supply hot water. Got ok pressure from the lance but cold only. Plenty of fuel, it was working recently and it is stored inside, any ideas please?


There can be multiple problems with the burner.Here is a link to a page for troubleshooting burners. ... Karcher 2500 PSI Pressure Washer

I have a Karcher 110 pressure washer and when switched on to jet wash the water is coming out of the handle and just trickling out of the jet nozzle please can you help. Thankyou Brian Hills


Which part of the handle is water leaking from? It could be that the hose connection into the gun is not fitted properly. Otherwise it could be that you just need to replace the handle. ... Pressure Washers

Water coming from trigger handle - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

Water is coming out of the handle on Nilfisk E130.2 pressure washer


... Nilfisk Pressure Washers

I have no pressure when I press the wand handle in. The motor is on water comes out but without any pressure at all. Fix??


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a model MDB7100AWQ, it fills with water but the motot won't start. Is there a reset code for this model? I did find a melted off plastic spoon handle in the bottom, could this cause it to trip something in the unit? The lights on the door switches come on but it only clicks, and won't start.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. To start with check the\015\012door switch if that\342\200\231s fine then you\342\200\231ll have to replace the ... Dishwashers

I have a Karcher electric pressure washer. Little to no pressure. Water come out of the bottom of the handle around the trigger.


See www.pressureparts.com for karcher ... Karcher 2500 PSI Pressure Washer

The cycle did not complete,the bottom spray arm (the tip) melted along with some plastic utensils (knife handles). Water come out of thee front door.When starting the washer again, the top and bottom spays do not turn.


The handles slipped down keeping the spray arm from rotating thus causing it to rest against the heating element. It won't wash because of the hole in the bottom spray arm. You have to replace the spray arm before nything else can be determined. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have a prava petrol pressure washer its starts but the water pressure is very low coming out of the lance...is there something i need to do..........


... Pressure Washers

Installing a built-in LG dishwasher; got everything ready to go, but a problem with the hot water line coming in. It is barely long enough to reach to the front where I've installed the elbow. Since I have to back the dishwasher in to the 24 in. hole there is no room for error in terms of not running over this hose with the bottom of the dishwasher. Any tricks to handling this situation?


Hi, best way would be to install a "spring" attached to the back of the dishwasher. The hose would connect to that and easily "pull-away" when moving or "pull-tight" taking up the slack. A much simpler method is to tie a piece of string to the hot wa ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

It appears to finish it's cycle, as far as the dishes are clean - however there is clean water that has pooled on the bottom. you can hear the water fresh coming in - the pump comes on for a few minutes, drains some of the water and shuts off - the pump comes on again - drains some of the water and turns off. I turned the water going into the dishwater off - the pump ran for a few minutes - drained some of the water and then just sits there with the red power light on - there is still the same


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Bosch 23 in. SHU3302UC Built-in Dishwasher

No water is coming thru the water valve to fill the dishwasher. The water is turned on. I had a Kenmore portable dishwasher and we just converted it to a built-in. The electricity is on and the water line installed. When I turn on the dishwasher, it comes on ok but no water is coming into the machine.


Most probable cause a faulty intake solenoid. OK start simple and go from there.If your have power and light etc come on then we know you are good for power. I'll assume that is OK. If\012you are not getting any li ... Dishwashers

Hi my L G dish washer is coming up with E1 . It comes on after about 2 min it takes water into the washer then it hummes for about 30 seconds then comes up with E1 and pumps water back out. I have checked the hoses which don't appear to be leaking -I read somewhere in your answers about this problem that it could be the Water Level in Drum lowering, this means there is a leak on one of the pipes. More likely it is the Circulation Pump, which is responsible for pushing the water to the Spray


Hello aderry -\015\012\015\012\015\012I'm a bit short of time as I'm on my way out to a service call, but I've uploaded the service manual to Rapidshare for you to download. \015\012\015\012\015\012Rapidshare download inst ... LG Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0860 seconds