Having problems with your Pressure Washers ?

Bosch aquatak high pressure switch

\015 Does not switch motor off when stop spraying.\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bosch aquatak high pressure switch

... Pressure Washers

Using a Bosch 1600W Pressure washer Aquatak 110 plus Was adjusting the twist pressure sleeve to get HIGH pressure and water supply stopped and sleeve seems fixed/seized. I turned power ON and OFF and turned water tap ON and OFF but still no water coming out of the nozzle. What do I do now?

... Pressure Washers

I have a Bosch Aquatak 110 but the high pressure hose flies off the machine as soon as I release the handle. I have put it back on twice and screwed it in as hard as I could but still flies off every time.

... Bosch AQUATAK 110 Pressure Washer

HI I am Shashi, After switching on the Bosch Aquatak 150 pro pressure washer, inital starting sound is not stopping, and machine is not able to output any water

... Pressure Washers

I have a Pressure problem on my PowerCraft pressure washer. On initial switch-on the machine runs at low pressure. If I then rotate the end of the lance to detergent application mode and then rotate it back to high pressure mode the high pressure kicks in and all is well. Is the lance faulty?

... Pressure Washers

Bosch aquatak 150 pro - Bosch AQUATAK 150 PRO X Pressure Washer

... Bosch AQUATAK 150 PRO X Pressure Washer

My bosch aquatak is making noise - Bosch AQUATAK 115 PLUS Pressure Washer

... Bosch AQUATAK 115 PLUS Pressure Washer

I have a bosch aquatak 1300si the pressure has dropped off considerably.It usedto cut out automatically when it reached operating pressure and only cut in again once you started to wash ,now it runs constantly but does not achieve enough pressure to wash effectively

... Pressure Washers

Bosch Aquatak Clic 125 running problems - keeps pulsing and unable to reach continuous full pressure - has been working well up to now - water pressure OK

... Dishwashers

On my campbell hausfeld water wizard 2000 the wand sprays at low pressure just fine but when i switch it to high pressure it just dribbles out. Why

It sounds like a blockage in the high pressure nozzle. ... CampbellHausfeld Pressure Washers

No pressure pump doesnt switch to high pressure

... Pressure Washers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

Hello I have a Bosch dishwasher SHU9905UC and went to clean the spray arms etc and ran the machine without the filter screens in the bottom. **** went everywhere, food, soap scum etc and it first stopped draining and filling. Cleared the drain flap and now works on drainng and filling. But now the wash pump is not running. I figure **** is somewhere in the wash pump or blocking a micro switch etc. I can turn the impellor with my finger. Is there a micro switch in the pressure chamber that is a

... Dishwashers

Hi there I have a Bosch SGV4313GB/17 Dishwasher the problem is there insuffient water pressure to feed the washer arm and they are not rotating Ihave cleaned the arms and circulation pump impeller with white vinegar ,I have also overriden the door switch and operated the dishwasher with arms removed and the circulation pump seem to be working but with insuffient pressure also the machine does not fill to the depth it did when it was fine! How does one tell if it is the impeller or the

Ours is a SHU3300UC/06 model, basic model which we bought in 1999 so have had 9 years of trouble free service.Recently\015\012we noticed that there was soap left in the soap dispenser after the\015\012machine had finished all the cycles. On fu ... Dishwashers

Power washer will only run when sprayer is on low pressure as soon as sprayer switched to high the pressure washer quits

... Earthwise PWO2200 2,000 psi 1.6 gpm Electric Pressure Washer

My Bosch pressure washer has power and the water is flowing through the machine, but no high pressure?

It would take a small book to explain how those things work but I'll try to cut it down some. Most have three pistons in the bottom of the pump that are operated by a cam that looks like a wavy pancake. As the waves pass over the spring loaded pumps, ... General Pressure Washers

Bosch aquatak 120i pressure washer/tetergent

The end of the chunky sprayer has a grad scale-one end is MAX and you think the other is MIN buut it is MIX-set on min it mixes the det. with the water --wont mix on any other setting. ... Karcher 2500 PSI Pressure Washer

When I switch the nozzle to high pressure the engine cuts off. Can you tell me what's wrong

Hi again and thanks for your response. If the engine is coming under an extreme load the unloader valve is stuck in place. Since the unloader valve is on the bottom of the pump it stays wet all the time and when in not in ... Pressure Washers

Karcher 2.89M When the trigger is pulled it switches on/of/on etc continuously. A suggestion is that there is a leak in the High Pressure side.

... Pressure Washers

Bosch Exxcel model number SGS46E12GB had the check water light on a week ago, checked supply and cleaned filters, all good. light still on, got upset and slammed the door, light off. since then the unit will either wash stuff, or not. didn't seem the arms were spraying very well when I opened the door, so I bypassed the door switch tonight and put it through a pre rinse cycle. (I ran it with the bottom filters removed) upshot is the pressure of water was really poor. also, when I first turned

... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

We have a bosch aquatak click 125 pressure washer. Could you tell us how to rewind mains cable into machine, normally it goes back on its own. Thanks

Try pulling it towards you and then letting go. Sort of like an old vacuum cleaner cord. It will probably click and then retract. ... Pressure Washers

Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have

... Dishwashers

My Bosch dishwasher, S9J1F will not clean things properly, I've changed the arms, cleaned it. I think the arms don't seem to spin properly, (I bypassed the door switch so I could see them spin)I have tried new arms though, pump pressure or ?

Not enuff water in it or pump blockage or bad pump impeller. if you ran it with the door open even if the arms didn't turn you should have got drenched is the bottom covered with water about 1 inch deep some times the fill valve screens get clogged a ... Bosch Dishwashers

Bosch aquatak 100 plus pressure washer instruction manual

... Pressure Washers

My bosch aquatak 115 has no pressure and is leaking water at the hose handle

... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1062 seconds