Having problems with your Pressure Washers ?

DO I NEED A PRESSURE SWITCH?

\015 Do I need a pressure switch to run a Utilitech 1-HP Stainless Steel 12 GPM Lawn Pump... for my garden with a hose and nozzle? Or can it run without the nozzle open all the time? It is pulling water from a storage tank. Curious about the back pressure that it can withstand. Thanx.\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need jackson jpx-200 pressure switches


... Dishwashers

DO I NEED A PRESSURE SWITCH?


... Pressure Washers

Halfords HP1500 pressure washer in need of a repair. Where can i find a new pressure switch for it ?


... Pressure Washers

Cycle interupted until pressure applied to door, near control panel. Fault is intermittent. Sometimes I need to lean a chair against it to keep it going. Door clicks shut nicely and does not leak. Cycle always starts but often will not complete without a thump. Is pressure inside bowing the door and activating a safety switch?


Problem on the safety switch\015\0121)try to adjust the safety switch to contact properly with the door.\015\0122)any screw is there on switch means loosen the screw &adjust to contact with door. ... Bosch 24 in. SGS43C02 Classixx Built-in Dishwasher

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

Need to know how to wire the on off switch on a 1750 psi pressure washer. it is a 4 pole switch


... Campbell Hausfeld PW1750 Electric Pressure Washer

Need the wiring diagram for the on off switch for husky 1800 pressure washer


... Pressure Washers

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit! ... Karcher K2.26 Electric Power Washer

Asko dishwasher 1385 does not drain completely. do i need a drain pump or a bottom well with pressure switch? is this a repair a mechanically inclined person can accomplish?


Hi\015\012\015\012\015\012\015\012Thanks for using FixYa.\015\012Dishwasher not draining properly or not draining at all issues can arise due\015\012to different reasons. Usually, these issues are related to kinked hoses,\015\012knocked o ... Dishwashers

WIRING OF PRESSURE SWITCH AND FLOAT SWITCH


... Indesit 24 in. D63 Free-standing Dishwasher

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in

The start switch (right side) not power switch (left side) broke....(below the overlay). I need to replace the switch and overlay. What part(s) do I need to fix the switch. I now have overlay part number. This is for "start" switch... Thanks


Hello again,\015\012\015\012I'm glad I was able to help you earlier with the overlay, unfortunately I'm not sure I can go 2 for 2 because the start switch issue is going to be a little more involved.\015\012\015\0 ... Asko 24 in. 1805 Built-in Dishwasher

Got a Indesit Di620 Dishwasher that trips RCD after power up & immediateley as you shut door.Fault is definately related to pressure switch, disconnected pipe to switch and then able to start cycle, without tripping, small amount of water out of pipe,but cycle only lasts for a few minutes, then stops. ( blowing into pressure switch trips rcd )How can i test switch, or is it a water level problem ??Any help would be good, thanks S.C


... Dishwashers

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

Asko Dishwasher starts the cycle by pumping out as it should. But does not stop pumping nor advances. If I click it forward manually it starts to fill and then before overfilling goes into pump out without washing then just repeats this. Pressure switch tubes and air trap chambers are clean and no leak to trip spill switch. I'm guessing It is either the timer or faulty pressure switch any clues ???


If has "mother board" then water could have got in.\015\012\015\012Here Asko is low cost make so check cost before serviceman calls & charges & charges and so on. ... Asko D1706 Built-in Dishwasher

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

Indesit d41 dishwasher overfilling, pressure switch seems ok(checked with multimeter) ,when pressure switch is manually operated the electro fill valve remains open. only time fill vave shuts is when power is off or door is open. can someone please help as i cant find wiring diagram or service guide online


Possible faulty pressure switch or a faulty drain pump ... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

Kelvinator KD12WW dish washer How do I open the unit to change the pressure switch as the unit will only take in a cup full of water. I have purchased the pressure switch for Tecsa Cape town Regards Chris


... Kelvinator Dishwashers

What does a failed pressure switch look like? I have removed my pressure switch (part 8071024). It is clean without apparent damage. The point at which the small, black hose connects has a plastic "button" inside, which appears as if it should move but it does not move at all. Is it seized? I think my issue is very similar to issue "Dishwasher Flooding Out" article on your site from (Oct 2007). This is a very helpful site, and thank you for any input on this question.


... Asko 1385 Dishwasher

Pressure washer does not discharge water under pressure until the nozzle has been removed from the lance- press switch and release, refit nozzle and then the water is discharged. Will switch off but does not activate next time.


... Pressure Washers

My kew alto force pressure washer would normally cut out and start again in about 30 minutes. now it will not start at all. i have dismantled the pump from the housing and everything looks ok even the pressure switch is very clean. Could it be the on-off switch that is faulty. any help would be appreciated. fg


... Pressure Washers

Hi I have a HOBART AMX-70 and my question is does the pressure switches b3 and b4 work with water or air pressure because when i remove pipes from switches i get nothing.


Www.ukexplorers.co.uk/shop/pdf/AMX.pdfThat is link for the entire manual!B4 I do know is water pressure, ... Dishwashers

WHAT ARE THE THERMAL FUSE SPECIFICATIONS FOR KENMORE ELITE MODEL 66513122K701SERIAL NUMBER FY1211868 AND WHAT IS THE PART NUMBER FOR A THERMAL FUSE KIT? WE HAVE HAD TWO FUSES BLOW AND THERE DAMAGE TO THE WIRING ON THE LEFT HAND SIDE OF THE CONTROL PANEL THAT CONNECTS O THE SWITCH. THEIR IS DISCOLORATION ON THE PARTS AND WIRING. WE HAVE SEEN EXPERTS STATE THAT IN ORDER TO CORRECT OUR ISSUE WITH THE FUSE BURNING OUT WE NEED A THERMAL FUSE KIT AND WE NEED THE SWITCH AND THE WIRING THAT CONNECTS TO


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012A ... Dishwashers

Coleman mobile home furnace...Model number DGAA077BDTB...The furnace about a month ago started going out ( flash code- Combustion Air switch stuck closed)We replaced the thermostat on the wall and it stopped doing it and ran fine then last night it stopped again ( Combustion air switch failed to close) and when i got up the furnace was working and now for the past few hours it refuses to do anything...I am on a very very tight budget...and need some idea of what is wrong and do i need a professi


I had the same errror code on my coleman furnace (3 flashes combustion air switch failed to close) but at first didnt realize there was even a light that gave codes..Anyways long story short, after searching many forums one guy mentioned about the fu ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0590 seconds