Having problems with your Pressure Washers ?

Karcher kb3030 will not start and cuts out

\015 Water pressure is ok no water leaks .if spin the fan blade washer starts but cuts out after a short time and pump feels hot\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Im having a problem keeping the motor running. it cuts off and will re-start easily and run in the choke mode? won't run in the normal mode until i cut it off and re-start. then it will run for about 5 minutes and cut off again? HELP


Hello. Your carburator is gummed up. Get a can of seafoam fuel additive at the auto parts store and put the recommended amount into the gas. This will clear up the problem in just a few minutes. Joe ... Northstar Pressure Washer 3000 PSI

Hi there,i have a brand new but 3 year old,diplomat 8332,just fitted it,it does the pre was ok,pumps out the water,goes to next stage,you can hear water entering the machine,shortly after it has started the main wash,it starts to cut out intermittantly,then F2 code appears,and a bleep.i have taken the lower panel off and checked for leaks and to see if the valve was free,all ok,also relay click in front panel,safety cut out ? any ideas please.


... Dishwashers

Bosch compact Logixx dishwasher (8401) will not start after it did turn on to start a cycle. Pump made laboured draining noises then seemed to cut out. Water remains in the bottom after last cycle.


... Bosch Dishwashers

My kr2020 washer keeps cutting out .the unit appears to get overheated and cuts. after about 10minutes it will start up again for a while before cutting out again


... Karcher K 3.98 M Electric Pressure Washer

When i press start it sounds like its starting and then after a couple of minutes cuts out and the 'finished' light comes on and the start button is flashing - i have tried to reset it but the problem reoccurs


It might help to know the make and model number of the dishwasher.\015\012\015\012Have you checked the door latch is making proper contact. Sometimes the door switch open can cause the dishwasher to stop. Make sure the door seal warp or s ... Dishwashers

Beko dw600 integrated dishwasher will not start cycle. all conections are ok, salt in, rinse agent in but will not start washing cycle. motor starts but cuts out after 10-15 seconds then nothing?


... Beko Dishwashers

Pressure Washer Purchased in 2001. Used about 30 hours. It is very hard to start if at all. Good gas, good spark plug. Sometimes it will start within 50-100 pulls. After getting started, if you release hose trigger it will cut off. Any suggestions of what else to do? Thanks in advance.


I would look into getting the carb rebuilt, sounds like there is some gummed up valves. ... Pressure Washers

We had a power surge and the dishwasher (lg 7811) starts but cuts off when the water should start with error mssage "ei". Is there some kind of reset or did the computer get fried?


Mine was doing this also and based on solution by guru MNTECH, I removed the front door skin (screws around inside of closing edge) and found the 5 bad wires broken or compromised. I spliced them back using crimp connectors from ACE HW and wrapped t ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I have a bosch aquatak 1300si the pressure has dropped off considerably.It usedto cut out automatically when it reached operating pressure and only cut in again once you started to wash ,now it runs constantly but does not achieve enough pressure to wash effectively


... Pressure Washers

My KitchenAid Model KUDE70FXSS 2 dishwasher is new to us today and has never been used before. It was hooked up professionally, but I assumed it would work, so tonight when I tried to run it, it lights up on panel, but it won't run any cycles. It will start putting water in the machine, but then cuts off. It starts making a grinding noise underneath the machine, and it clicks like it is trying to work, but the water doesn't wash. Hmmm. Anyone know what to do?


... KitchenAid KUDE70FXSS Builtin Dishwasher

Hello, I own a Honda Pressure Washer (Porter Cable Model) with a Cat pump 2600psi and 6.5 hp. An Excellent machine for the past 7 years. Last fall I noticed it was not producing the full pressure but still Engine was running strong. This past weekend. started it up and used it for about 1 hour still with minimal pressure at full throttle. Then pressure was totally cut off. I stopped and started the engine the engine and it had minimal pressure again. Same thing happened again. I stopped the engi


... Honda Pressure Washers

I have an Electrolux ESI 6104x. Regularly just after starting the dishwasher as it starts to fill for the first time the water inlet cuts out. If you turn the water off at the mains disconnect the inlet pipe (spilling a bit of water in the process) reconnect the inlet pipe and turn the water back on the dishwasher fills and runs perfectly. This fault used to happen occasionally and now happens regularly.


Disconnect the fill pipe from the back of the machine and you should see a small mesh strainer in side the dishwashers inlet valve. Check that this is not dirty - to clean it pull out the strainer and rinse under the tap. ... Dishwashers

I have a three year old Maytag MDGH985AWW and in the last few days the START button won't work. All other buttons on the panel light and respond to touch, except START. It is dead. I've cut the breaker on the machine for 5 minutes and turned it back on, but the problem persists. Any suggestions?


... Maytag MDBH985AWW 24 in. Built-in Dishwasher

Trigger problems When I realease the trigger it cuts off the spraying but then it tries to start back up. It makes a sound like it is cutting on and off. I would like a dirgram of the trigger can I get one. Thanks


It is recommended that once pressure washer is in operation and water flow thru wand is there ,that you do not allow off period between burst of no more that 2 minutes or you highly risk damage to your pump,not engine, due to overheating. See if Dump ... Karcher Pressure Washers

Clean button wont cut off and the start buttom cuts off


... Whirlpool DU1301XTV Builtin Dishwasher

My oven cuts off fifteen seconds after I start it, either Broil, Bake or Convection. It doesn't want to start. Any idea? Thanks Andre B.


I did not find a solution. I thought the forum was free. I will be looking somewhere else. Thank you. ... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

Smeg dishwasher model DI 612 C type 12053 good morning After selecting a program and shutting the door the drain pump starts and runs for 2 seconds then stops. The machine makes a bleep noise then the drain pump starts again running for 2 seconds then stops again and the cutting in and out process continues and the machine never reaches its selcted cycle. No alarm lights are displayed. I have filled the machine with water so that the filter is submerged and the level is


... Smeg Dishwashers

My kew alto force pressure washer would normally cut out and start again in about 30 minutes. now it will not start at all. i have dismantled the pump from the housing and everything looks ok even the pressure switch is very clean. Could it be the on-off switch that is faulty. any help would be appreciated. fg


... Pressure Washers

Dishwasher Problem My Kenmore Ultra Wash Dishwasher has a light which state "lock" on and I can't cut it off or start the washer..Does anyone know what is locked and how it got locked and how to unlock it and start the washer?


According to my ultra wash dishwasher you have to hold the no heat dry button for 4 seconds and that is how you lock and unlock the control panel ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I started the motor and it ran about 30 seconds and it cut off . I then tried to pull start it and it would not pull easy it pulled hard til i could not pull it anymore.


I get this question a lot, and 9 times out of 10 the reason it because there is pressure in the pump. After the unit shut down did you pull the trigger to release all the pressure from the pump before attempting to restart? When these units have pre ... Honda Pressure Washers

Start problem my smeg dwd1sse-1 starts for abt 1 sec,then stops,we had a recent power cut and i have cleaned the filters checked for blockage etc.


Hi WE give this answer in good faith that anybody who benefits from it will make a donation to COMIC RELIEF, because I've just fixed my smeg d/w which is a great relief and no joke when not working, SO DONATE.My dishwasher tried to ... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

I have a Delonghi dishwasher, it's a stand alone, like a washing machine. The water inlet is connected to the hot water tap, normally used for a washing machine. When we first started using the dishwasher, we kept getting the E4 error message, we reduced the water inlet pressure by turning down the tap, that worked for a while. Just a while ago, we started getting the E4 error message again, not sure we can turn down the tap any further without cutting the water off completely. Do you have a


The E4 error message could be because the water pressure is too low rather than too high. Can you let me know the exact model number of your dishwasher and I should be able to tell you more.\015\012\015\012Regards,\015\012BElectric ... Dishwashers

I have a zanussi ZSF2440 dishwasher, when it turned on by the power button on the front you can choose a cycle and start it, Once the cycle is started it fills up with water but doesn't stop until it over flows setting off the flood protection, which cuts the power, so all the lights on the display go off and stops the water flow and drains the dishwasher and keeps draining the dish washer while the flood protection is on. It seems as if the dishwasher doesn't know when its reached its correct


... Zanussi Dishwashers

Simoniz s1700 my pressure washer s1700 simoniz cut me off all the time and after 20 minute when i start it start again


... Pressure Washers

Karcher kb3030 will not start and cuts out


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0576 seconds