Having problems with your Pressure Washers ?

Hose replacment for simoniz s1500 pressure washer


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hose replacment for simoniz s1500 pressure washer


... Pressure Washers

Replacement gun and hose for simoniz cl 11 - Omega Simoniz 1300 Psi Pressure Washer


... Omega Simoniz 1300 Psi Pressure Washer

Looking for replacement hose for a Simoniz 2500 gas pressure washer with a five H.P honda motor .


... Karcher 2500 PSI Pressure Washer

Replacement pressure hose for Simoniz mod LR54005 power washer


... Pressure Washers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

I have a Husky pressure washer with a Honda 2600psi engine. Problem is, no water will come from the pressure hose. I connected the water w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help.


Check the quick disconnect to the wand these are spring operated and can get stuck ... Pressure Washers

I have a Generac pressure washer, model #01450-0, with a Honda 5hp motor. The motor runs fine, but the pressure hose pulsates as if the pump is intermittently making pressure, and the pressure out of the sprayer is about half of what it should be. A friend suggested replacing the seals in the unloader. I bought an unloader kit, replaced everything and it still runs the same. It will build a small amount of pressure, spray for a few seconds, then the pressure dropps to almost nothing. Any help ap


Take a small diameter wire and poke thru the discharge hole of the spray head to clean out.\015\012Second time in 6 months that I had the same problem. The problem is alway in the spray head. ... Pressure Washers

I have an electric power washer k3.99M. I just replaced the pressure hose and now the washer will not turn on. If I remove the unit from the water hose, it works, but when I hook everything back up, it doesn't.


This sounds like the hose is plugged or the nozzle itself is plugged. If the water cannot get through, the washer senses that the trigger is off and will not turn on the pressure. First just attach the hose without the gun and nozzle. If it pumps w ... Karcher Pressure Washers

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

Had the Northstar 3000 psi Pressure Washer for 2 months and it started leaking oil from the pump during use. Took it to Northern and they are replacing the pump under warranty but said it was likely because I was using quick connects on my garden hose coupling and that was restricting the water flow making the pump overheat. They said never to use quick connects on the garden hose unless the opening is at least 5/8". Does anyone make such a quick connect? I hate having to screw the garden hose o


It is easy to check if your hose and quick connects are supplying enough water to the pump. Your pressure washer gallon per minuite requirements are printed on the machine and also on the pressure tips in GPM. Your post indicates 2.5 gpm but check yo ... Northstar Pressure Washer 3000 PSI

Pacific hydrstar pressure washer lost water pressure. Hose is fine when unattached. Replaced nozzles


... Pressure Washers

Ineed to replace the hose on my champion cpw1750 pressure washer but how do I disconnect from the gun or do I have to replace the gun as well


If the hose is screwed into the gun then you are lucky because you only have to replace the hose, but if the hose is clamped inside of the hose then you have to replace both the hose and the gun ... Pressure Washers

I own a McCulloch Model FH130B Hi Pressure Jet Washer and need to replace the hose. Where can I find the replacement parts? I live in Sherwood Park, Alberta, Canada. RP


A real good/knowledgeable hose shop in your area should be able to fab a replacement. Otherwise possibly check at a local contractor store like that of home depot for replacement short of investigating the mfg web site for authorized repair/service c ... McCulloch FH180A Electric Pressure Washer

Black and decker pressure washer PW1700 replacement hose


... Black & Decker Pressure Washers

How do i replace hose on honda 2200 psi pressure washer


... Honda Pressure Washers

Simoniz S1400 Electric Pressure Washer


Most of the Simoniz pressure washers are, in fact, rebranded Karcher pressure washers. You can't find support or documentation on their website for machines they no longer make. However, there is a handy dandy website that you can use to find older v ... Karcher 2500 PSI Pressure Washer

I have a honda 2600 pressure washer. After running fine for a couple of seconds the water will stop flowing out the tip. It is receiving water,but will not flow it to the pressure hose. I even disconnected the pressure hose and no wate was flowing out. When I shut the pressure washer off it would then flow water to the hose again. Please help


This is a symptom caused by a sticking Unloader valve. The Unloader valve is inside the pump outlet body under the large black knob. \015\012Example picture : ... Honda Black Max 2600 PSI Pressure Washer

How do I remove the shroud on my Excell XC2600 pressure washer so that I can replace the pulse hose?


The easiest way to remove the shroud is to remove the motor from the base entirely (there are 4 bolts to remove). After you've removed the base you can access the 6 torx screws (#15). The two back screws can't be removed with the engine still attache ... Pressure Washers

Pressure washer hose replace


... Pressure Washers

Black & Decker PW1700SPM Pressure Washer hose broke where can i get replacement


... Black & Decker Pressure Washers

Mcculloch chain saw pull rope replace - McCulloch MH1300 1300 PSI 15 GPM Electric Pressure Washer with 19Feet Hose


... McCulloch MH1300 1300 PSI 15 GPM Electric Pressure Washer with 19Feet Hose

Need to replace hose on my honda gcv 160 5.5 pressure washer , any suggestions...


... Campbell Hausfeld PW2575 Pressure Washer

We are trying to put together a Simoniz 1300 PSI Pressure washer and we cannot get the hose installed do you have instructions for this unit


Use a little vegetable oil (or water, or spit) around the "o" ring, wiggle the center-part (the hose) in first. Meaning don't try to use the screw-on ring to force the hose in, grasp the hose itself and wiggle downward. Once you feel it seat, then sc ... Omega Simoniz 1300 Psi Pressure Washer

Honda pressure washer..replace part wear u connect water hose too


... Pressure Washers

EXWGV2121 I am not getting any water at all from the outlet hose. I replaced the manifold and no valves are sticking or seals bad. Don't know much about gas pressure washers


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1161 seconds