Having problems with your Pressure Washers ?

AA HPW 110 Pressure Washer,fix on off switch in gun handle

\015 How does the on off switch sit in the housing of the handle\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

AA HPW 110 Pressure Washer,fix on off switch in gun handle


... Pressure Washers

Have a Karcher kb4040 that continues to run constantly even when the trigger isnt pressed. Also water flows out of the detergant hose when im not pressing the trigger. Pressure seems down slighlty, not much. This happened after i ran water out of trigger gun with no lance attached, machine switched on. Seems to leak from trigger handle aswell. Many thanks in advance


This is two things. One is the back flow check valve to the soap line is leaking. The other is the pressure switch on the output side of the pump. ... Pressure Washers

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

My Karcher K730 MXS pressure washer was leaking water out of the rear of the gun handle. I bought a replacement hand gun and the new gun is doing exactly the same!


... Karcher Pressure Washers

I have a Karcher 550M pressure washer and was using today when all of a sudden the water started to pour through the handle hence lost the pressure of the water. Is this a rubber washer issue or the gun needs replacing or simpler than that. To be honest although I have had the washer for about 3/4 years now It is hardly used. Also can I fix it and where would I purchase the allen key to replace. Thanks Brian


... Karcher Pressure Washer Gun 91120200 91120200

I have a coleman 3500 powermate. It is running fine, but has very little pressure at the gun end. ??...We don't have the operaters manual for it. There is a handle that turs right at the outlet for the hose, that has + and - symbles on it. It turns, but seems to do nothing ?.Is that a pressure valve ?..Any diagrams might be helpful.


I would think it is calcium or iron buildup in the line. Get some small wire and stick it in the end to see if you can clean and or some CLR to help dissolve. Then give it another go. let us know ... Coleman Pressure Washers

Pressure gun will not work, you have to disconnect the pressure hose, reconnect it, then it will work as long as you do not release the handle, if you do, you have to start that whole disconnect, reconnect process over again. It wastes time and we will not even mention the aggravation! What do we need to do?


Find a service centre or Local pressure washer co. Get the gun serviced ... Karcher K 2.25 R Electric Pressure Washer

My karcher 2.54 every time i switch on it cuts out the pressure washer seen to be working ok water running ok but when i connect the trigger gun and switch it on the power cuts out


... Karcher K2.26 Electric Power Washer

I have a McCulloch H.P. power jet cleaner 1300 and when i switch the device on the motor starts running but the pressure is not building up so no water is coming out of the pressure washer gun. We bought the device in 1999. Or alternatively is there anywhere in the UK to get the repairs carried out? Many thanks Michele.


... McCulloch Pressure Washers

I have a handy power HPGW 1500 pressure washer and when its used the water sprayes out of the gun around the handle part as well as the nozzel is it possible to purchase a new gun and connection to the machine


... HP Pressure Washers

Water is leaking from the handle of the gun on my Karcher pressure washer


... Karcher Pressure Washers

I have a Karcher 110 pressure washer and when switched on to jet wash the water is coming out of the handle and just trickling out of the jet nozzle please can you help. Thankyou Brian Hills


Which part of the handle is water leaking from? It could be that the hose connection into the gun is not fitted properly. Otherwise it could be that you just need to replace the handle. ... Pressure Washers

Pressure gun there is a large spring which is in front but there is also a very little sping, I think it is called a helical spring where does that spring go handle does not work properly without the spring trying to find diagrams but cannot find have a Karcher 3.98


... Karcher 1750 Psi Elec Pressure Washer

Model 18A has power, has water, can make motor operate with inside pressure switch...but does not pass water through hose system. Squeeze handle gets no response??


The hoses connect to a valve. Disconnect that valve and another valve is inside that one. If it does not turn to pull out it is plugged up. Follow directions to this web site how to remove it. \015\012\015\012\015\012 ... McCulloch Electric Pressure Washer 1800psi 145 GPM Induction Motor Cart

I have a McCulloch FHH20A electric pressure washer. It has stopped working. When I hook it up and hit the "on" switch, it comes on for a 1/2 second then stops. The long wand that hooks to the handle will not come off, I am thinking that it is clogged up somewhere. What can I do to fix it?


You will need to remove the nozzle on the end of the lance and clean the small jet out. ... McCulloch 2000 Psi Electric Pressure Washer Fhh20a

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

My Karcher 411A seems to have lost pressure. Behaviour is this, when you press the water release on the spray gun you get 100% pressure for like 10 seconds and then it seems to dwindle down to 30-40% of its total pressure. When the pressure cuts down I can hear more noise coming from the gun sprayer aswell. So not sure if the problem is in the gun or the main pump unit ?


Sounds more like a clog on the intake side. Check the filter and the hose on that side. ... Pressure Washers

Troy bilt pressure washer will not start. I checked continuity between the black wire from the coil and ground and it is showing a dead short which means one of my "fail safe" switches is probably clo


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Got a Indesit Di620 Dishwasher that trips RCD after power up & immediateley as you shut door.Fault is definately related to pressure switch, disconnected pipe to switch and then able to start cycle, without tripping, small amount of water out of pipe,but cycle only lasts for a few minutes, then stops. ( blowing into pressure switch trips rcd )How can i test switch, or is it a water level problem ??Any help would be good, thanks S.C


... Dishwashers

I have the Coleman powermate 2400 PSI pressure washer and on initial start it sprays and has great pressure. But once I release the spray handle it will not spray again, not even one drop of water. I have verified water pressure, bought 3/4 hose, and also changed the spray handle with no help. Pressure washer was bought new at Lowes, but did not use for first three years of ownership, should have tested it. Thanks for any help on this. Ted Miller


Sounds like the valve in the handle is sticking closed. May have a broken spring, or maybe a part is stuck..\015\012I say take it apart, and the answer will present itself.. Play with it with nozzle out too... Maybe something is stuck after st ... Coleman Pressure Washers

My karcher 3100 professional pressure washer build pressure at random, when I take the nozzle of the gun the pump works when the nozzle is on the pump wont build pressure or if I hold the gun in an on possition after 5-7 min it build up the pressure, what is wrong?


... Karcher Pressure Washers

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

Asko Dishwasher starts the cycle by pumping out as it should. But does not stop pumping nor advances. If I click it forward manually it starts to fill and then before overfilling goes into pump out without washing then just repeats this. Pressure switch tubes and air trap chambers are clean and no leak to trip spill switch. I'm guessing It is either the timer or faulty pressure switch any clues ???


If has "mother board" then water could have got in.\015\012\015\012Here Asko is low cost make so check cost before serviceman calls & charges & charges and so on. ... Asko D1706 Built-in Dishwasher

Excessive leaking on gun handle


The pressure comes from very sealed container and with the weather hot and cold usually the housing start to expand and let the pressure out…same with the hose. Fixing the unit may be more than the price for new one… If yo ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Karcher K2.65 Deluxe pressure washer. All connected up, turned it on but I have low pressure out of any of the attachments and water splashing out of connection between gun and extension tube


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0994 seconds