Having problems with your Pressure Washers ?
Pressure washer troy bilt soap dispenser does not work
Answers :
Repair Help & Product Troubleshooting for Pressure Washers
Tips for a great answer:
- Provide details, support with references or personal experience .- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?
You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers
Troy-bilt pressure washer won't spray soap
... Briggs Stratton 198347gs Pump Assembly Kit For Pressure Washers
Hi I have a Troy-Bilt Pressure washer 2200 psi model 20292. I've used it only 4 or 5 times. It ran great for an hour today then it lost pressure. Seems like the pump is not working. The engine runs fine but no pressure. The water runs through the nozzel and I blew air in the lines to make sure there is no blockage and found no blockage even in the pump lines. Any ideas. Tom
... Briggs & Stratton Gas Pressure Washer 20244
Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started.
Ok I wasnt satisfied w/ the previous answer so I did some digging. I took off all the hose attachments and drained the line. I then checked for any clogging in ALL the screens. As usual the wand screen was clogged. this is an easy fix w/ a safety pin ... Pressure Washers
Pressure Washer Troy Bilt 2700 PSI 2.3 GPM will not pick up soap. I am using the black tip low pressure head and it still does not pick up the detergent. Any recommendations?
Take the small soap line off and make sure you can blow air through. Where the line attaches to the soap container make sure the hole is clear if not take a streight pin and make sure the pin goes in the hole easily. ... Pressure Washers
Troy built pressure washer 2700 has a soap dispenser, what is the soap/water ratio?
... Pressure Washers
Soap dispenser not working - Karcher Pressure Washers
Chemical injector activates only when low pressure is utilized try this remove hose from triggergun assembly with the water turned on engine off allow water to free flow out of hose remove the chemical hose from the barb located at pump with a paperc ... Karcher Pressure Washers
Troy bilt pressure washer deadheaded - Troy-Bilt 020528 Gas Pressure Washer
... Troy-Bilt 020528 Gas Pressure Washer
We have a troy built pressure washer model 2700. What is the ratio on soap to water that it dispenses?
... Pressure Washers
Huskey pressure washer 2600 the water works but not the soap dispenser
Hello kjc33;Do you know that the unit must be on low pressure to apply soap. The control is usually on the nozzle\015\012\011\011\011 \015\012 ... Pressure Washers
Soap will not siphon on my Troy Bilt pressure washer.
Are you using the soap on low pressure. This is the only way it will work ... Pressure Washers
How to make the soap dispenser work - Honda Pressure Washers
1. Make sure that you are using the black quick connect nozzle supplied with your machine. If you have a vario nozzle (turns back and forth to adjust the spray pattern), you are going to want to pull out on the nozzle to get the machine to a lo ... Honda Pressure Washers
Troy-Bilt 52080 pressure washer which was running and working fine then suddenly stopped and cannot start
... Pressure Washers
The soap dispenser does not work any more - Briggs & Stratton Pressure Washers
The soap will only pull when using the soap nozzle they dont pull up the soap while under higher pressure or just use no nozzle at all ... Briggs & Stratton Pressure Washers
I have a John Deere AC2600Gh power washer and I can't get the soap to work everything else works great it just won't **** the soap up when I am pressure washing I know that it must be something simple to get it to work any help would be greatful. Thank You
Soap will only siphon into hose if there isnt any pressure in the hose attached to the wand.Remove tip from wand and see if it draws soap into hose,back pressure in wand hose will cause the spring and ball to seat/close off the inlet line for the soa ... Karcher 2500 PSI Pressure Washer
Troy bilt pressure washer will not build or reach high pressure
Check the non-return valves in the pump block. if these are damaged or dirty you pressure will be greatly reduced. they are located behind the 3 lage brass hexagonal caps.\015\012\015\012I hope this helps ... Karcher 2500 PSI Pressure Washer
Oil plug on troy bilt 020240 pressure washer - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer
... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer
Troy bilt pressure washer 020240 - Briggs & Stratton Pressure Washer Projectpro Spray Nozzle
... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle