Having problems with your Pressure Washers ?

Karcher k785 how do i replace the hose


Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Karcher k785 how do i replace the hose


... Pressure Washers

My Karcher 330 M has blown two water inlet ( Garden hose inlet ) elbows. Replaced one and then after about 5 min operation shut off the valve on the wand and immediately the new elbow split the same as the first. The garden hose I was using has a shut off valve could this caude the problem?


I have a larger gas powered karcher, just make sure the water going to your karcher is not obstructed from its path. on mine i bought a goodyear hose that can be purchased at northern tools or any hardware store. and use it just for pressure washing. ... Karcher PSI Electric Pressure Washer

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

Karcher 6.85 replaced seals as they were worn out and passing water into the oil now when I turn it on motor runs turning water on water comes out of outlet (which is ok??) but does not pressurize with hose disconnected. My Bosch pressure cleaner passes water through but when pump is started it pressurizes. Is it bypassing? Thanks in advanced


... Pressure Washers

Replacing the hose on a sealed gun karcher 330 pressure vwasher


... Karcher 330 Pressure Washers

Hi I have a Winner 11 by Karcher. the hose blew a hole in it am wanting to replace it. The only numbers that I can find are N1417 or S/N185140 or Q60004 are any of these going to make it easier to work out. Cheers Steve


I have a parts breakdown for this unit in a PDF but they made about 3 different styles of hoses and trigger guns, if you send me a email at [email protected] I can send you the brea ... Karcher K2.26 Electric Power Washer

How to fit a replacement hose to a karcher 7.85


... Karcher K 5.85 M Electric Pressure Washer

Leaking handgun karcher k785


Hello sir, that is a on going problem with power washers the pump not working, than works sporadically. the main cause is leaving the pressure hose hooked up to the machine over a long period of time,not draining hose & machine, in the winter tim ... Pressure Washers

Hi, I've got DS 603 single draw dishwasher Ser. No. CPM 739878, It has given a fl code for the flood switch. I have removed the draw and made the observation that the lower steel housing has partially flooded, hence the code. I intend to replace the flexible hoses Input and discharge hose. I am wondering once I replace the hoses, dry the housing and associated printed circuit bourd area should the fault code reset its self or is there further tech. assist required. The draw was manafactured


In the catch basis there is a printed circuit board that contains a sensor that detects moisture. Once throughly dry however, the sensor will no longer sense moisture and the flood code will cease and desist.BUT before replacing the hoses, (alo ... Fisher and Paykel Dishwashers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

Trying to replace drain hose on LG dishwasher. Replacement hose has a white U shaped fitting at top of loop with a black hose coming off of middle of the U with no apparent connection point in dishwasher. Any ideas?


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I am trying to install a new Maytag MDBH945AWB Dishwasher and have to run the drain hose under the machine in order to get it to the sink. Each time I try to use the hose that comes with the machine it snaps in two and breaks. I have tried to look for a replacement hose that would stand up to the abuse but all I can find is the original. Is there a replacement I can get that is more flexible than the one that comes with it? At this point I am rather embarrased about going back to Home Depot


Hi...home depot sells clear PVC hoses, They come in various lengths up to 100 ft. You can use hose clamps to connect it to the T-fitting. ... Dishwashers

How do i replace hose on k5.85


... Karcher K 5.85 M Electric Pressure Washer

I am replacing the drain hose on my LG Dishwasher LDS5811BB. The new hose they gave me has an additional piece connected onto the hose. I don't know what it is or what it is for. The original drain hose was composed soley of a gray hose with the to end connectectors. This new hose is similar with an additional white, hard plastic, U-shaped hose with a black hose extending off the end of the U-shaped end. Is this an air gap extension, and if so, what do I connect it to or can I cap it off?


... Dishwashers

DD603 leaking hose inlet due to hole in hose can I replace it myself and how do I access the inside of the dishwasher to replace it? A plumber has removed the unit to find where it was leaking so I have seen the problem but the outer casing seems impenetrable HELP


Provided you are reasonably handy and careful you may be able to replace it yourself. I have done so on a couple myself. You just need to go slowly and carefully. Always turn the unit off and disconnect from the power before you do anything. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hose feed keeps shooting off the karcher when I release the trigger M520


... Karcher Pressure Washers

KARCHER K210 WHAT KINDO OF OIL WILL I REPLACE FOR MY KARCHER K210 AND THE AMOUNT OF OIL TO BE REPLACED? THANK YOU.


If your discussing the crankcase, you can use regular non detergent SAE 30 wt. Do not use the new types of oil as they have additives that may cause harm to the engine. ... Karcher 2500 PSI Pressure Washer

Whirlpool dishwasher will not drain. All hoses are clear. I replaced the air gap too. The dishwasher will drain into a bucket when I detatch the hose from the air gap, but not into the drain/disposal when I replace it.


Http://www.partselect.com/repair.aspx?appliance=dishwasher&part=water-wont-drain\015\012\015\012\015\012\015\ ... Whirlpool GU2400XTP Built-in Dishwasher

I got this dishwasher from a friend that had mice chew the hoses and i was told that it worked perfect before the mice chewed it. I replaced the drain and fill hoses plus the power cord. when i put everything back together and power on I get F1 on the top drawer and the rotor rotates and the heater plate turns on. The botton drawer does nothing with no display. I checked all the wires with a meter and found good continuity thru every pin. I replaced the main filter board. I even switched the


Did the F1 error in the top drawer disappear after you replaced the mains filter board? ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have a broken drain hose on my LG Dishwasher (Model LD-1403W1). I have the part to replace it and cannot see how this is done. Can you assist with instructions on how to replace thew drainage hose. Thanks for any help you can give


... Dishwashers

9e error code on Samsung dishwasher. dmr77lhs. Already replaced drain hose, worked for 3 months, then 9e came back. Replaced supply hose but did not change error status.


I get this error code every 9 months or so with my DMR78.... Every time, I pull the dishwasher out, remove the cover, and then clean out the float on the left side of the dishwasher (the white plastic piece in the bottom center in the attached ... Dishwashers

Replacing dishwasher. Inlet hose & outlet hose have plastic fits


The brass fitting should be hex shaped so you can get a wrench on it and it should rotate in the plastic line so it won't twist the plastic hose. Don't forget to shut the water off to the diswasher before disconnecting the supply line. ... GE Dishwashers

We're trying to install our dishwasher and there is a 3rd hose attached on the side. It appears to be a drain of some kind, part number, we think, printed on it is FRU 10967 19/07/04 08:33 Can you tell us what it is and where and how to attach. The one it's replacing only had the water hose and the drain hose, no third hose. Thanks


I just installed my Bosch dishwasher a few days ago and wondered about the same thing. The instructions for hooking up water supply and drain lines did not mention this third hose at all. \012\012However, 'the third hose' (which appears open on ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Husky pressure washer with a Honda 2600psi engine. Problem is, no water will come from the pressure hose. I connected the water w/out the pressure hose and water flows thru strongly. I then connected the pressure hose w/out the wand and water flowed thru the hose fine. When I connect the wand and pull the trigger, nothing. I have replaced the wand and that was not the problem. Please help.


Check the quick disconnect to the wand these are spring operated and can get stuck ... Pressure Washers

Outlet hose on hotpoint aquarius FDW70 dishwasher broken. how do I get the back panel off to replace hose?


... Hotpoint Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0782 seconds