Having problems with your Pressure Washers ?
Soap dispenser doesn t work - Pressure Washers
Answers :
Repair Help & Product Troubleshooting for Pressure Washers
Tips for a great answer:
- Provide details, support with references or personal experience .- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
New dishwasher the soap dispenser door doesn't open when the washer is on any cycle. Therefore, dishes are not getting cleaned. Help. I have tried moving the button back and forth to break anything free that could be making it stick. Still doesn't work.
Having same problem + won't dry. Looks like this is a crap dishwaher. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher
I have a John Deere pressure washer with the AR RSV 4G40 pump; it will not pull up the soap any longer. I have only used it a few times, which it worked great, and now it doesn't work! Anyone have any ideas what the problem could be
... Annovi Reverberi AR Pressure Washer Pump RKV4G40-PKG
Huskey pressure washer 2600 the water works but not the soap dispenser
Hello kjc33;Do you know that the unit must be on low pressure to apply soap. The control is usually on the nozzle\015\012\011\011\011 \015\012 ... Pressure Washers
The soap dispenser does not work any more - Briggs & Stratton Pressure Washers
The soap will only pull when using the soap nozzle they dont pull up the soap while under higher pressure or just use no nozzle at all ... Briggs & Stratton Pressure Washers
How to make the soap dispenser work - Honda Pressure Washers
1. Make sure that you are using the black quick connect nozzle supplied with your machine. If you have a vario nozzle (turns back and forth to adjust the spray pattern), you are going to want to pull out on the nozzle to get the machine to a lo ... Honda Pressure Washers
Soap take up doesn't work - Pressure Washers
See attached links \012\012Using the right nozzle\012\012Repairing the che ... Pressure Washers
Soap dispenser not working - Karcher Pressure Washers
Chemical injector activates only when low pressure is utilized try this remove hose from triggergun assembly with the water turned on engine off allow water to free flow out of hose remove the chemical hose from the barb located at pump with a paperc ... Karcher Pressure Washers
Pressure washer won't pull the from the soap dispenser
Nozzle dirty, clean out nozzle with small diameter wire. Soap dispensing only happen at nozzle low pressure setting ... Honda Maxus Pressure Washer MX5222
Our SB915WJ doesn't heat water though the heating element is ok, I checked with my multimeter. Is there a mains relay or something i need to change in the circuitry to fix this problem? Does anyone out there have a service manual you can email me? Also the fan drier isn't working, also the relay that is supposed to flip open the soap dispenser doesn't work. The unit is only eighteen months old. I'm not impressed with it's working life.
THERE IS A HIGH TEMPERATURE CUT OFF SWITCH WHICH LOOKS LIKE THE BAK OF A STAINLESS STEEL WATCH IT HAS TWO LUGS THAT THE HEATER ELEMENT IS ATTACHED TO. IF YOU TEST IT YOU WILL FIND THAT IS IS OPEN CERCUIT. I'M NOT SURE WHERE IT IS ON THAT MODEL BUT ... Westinghouse Dishwashers
I have a John Deere AC2600Gh power washer and I can't get the soap to work everything else works great it just won't **** the soap up when I am pressure washing I know that it must be something simple to get it to work any help would be greatful. Thank You
Soap will only siphon into hose if there isnt any pressure in the hose attached to the wand.Remove tip from wand and see if it draws soap into hose,back pressure in wand hose will cause the spring and ball to seat/close off the inlet line for the soa ... Karcher 2500 PSI Pressure Washer
I have a Ridgid 3300 PSI pressure about 1 year old. Works great on pressure but stopped dispensing soap its not stopped up but just wont pump soap out of container, the hose does not have a hole in it
... Ridgid Rd80702 3300 Psi 3.0 Gpm 7 Hp Subaru Ex21fi Ohc Gas Powered
Frigidaire built in dishwasher model PLD2855RFC1. Have to wash dishes pretty much spotless prior to using dishwaser. Glasses come out with what appears to be soap residue regardless if powder or liquid. Did not use a gauge but water pressure in rest of house is good, recently replaced water heater, pressure regulator and just replaced the dish washer water source valve. Washer is about 18 months old, has never worked really well.
Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Frigidaire PLD2855RFC Dishwasher
Doesn't appear that the washer is running through its cycle. The soap packet isn't desolving and no water is on the plates. There was an incident when the washer tripped the circuit breaker, reset breaker and now it doesn't work. Is there anything I can do, or do I need to call service?
I think something went wrong with your motor or the inlet Solenoid valve. That was the reason for the trip.Take service center help!Hope you are getting power after resetting the trip. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Soap dispenser doesn't work no vacumm in line . even where it co nnects at the bottomof the unit has rarely been used and never with anything in the soap dispensers
... Karcher 1750 psi Electric Pressure Washer
My pressure washer doesn't have adequate pressure anymore, it was working well and then the psi pressure just stopped. It will crank up and spray but there is no added pressure, it spray the same as if the motor was off.
... Pressure Washers
Water coming out of the soap dispenser on the pressure washer
I would suspect a piece of debris is caught under the injector ball valve. It may also be clogged with soap if you failed to flush it clean after the last use. Disassemble the valve and give it a good cleaning. Be careful as there is a small ball bea ... Karcher PSI Electric Pressure Washer
Not washing washer drains fine, soap dispenses and heater works, but water barely comes out of revolving washer arms, and none at all on top washer arm. pluged or bad motor.
First check to make sure the water supply line to the unit, isn't kinked and the valve is completly open. then i'd try using a solvent that removes calcium deposets[clr or something similar] in with a few cycles. then i'd start looking for a motor. ... Asko D1716 Built-in Dishwasher
I have a model PW 2200 gas pressure washer. It suddenly lost it's high pressure the other day after working fine for @10 minutes. It's getting plenty of water, but the engine doesn't seem to rev up to give it the high pressure. The operating instructions say to check the oil in the engine, and the PUMP before starting, but I haven't found any place to check for an oil level in the pump????Any ideas, I'm very confused.
... Pressure Washers
I have a Kracher K 4000 GS pressure washer and it seems to have been fine until today. When I start it and squeeze the trigger there is nor pressure, water comes out but as it would normally from the hose. The engine does not even seem to be under load. I used it the other day and got pressure when I picnhed off the soap hose but that did not work this time.
... Karcher G3025OH Pressure Washer