Having problems with your Pressure Washers ?

I need bolt torques and valve clearences for pressure washer?

\015 Greetings: I have a generac 2700psi gas pressure washer. I'm in the process if assembling a new cylinder head. I need the head bolt torques, valve clearences, and head cover bolt torques. I called generac and litterally begged them for the specs and they said they don't have them to give out to consumers. I'm at the tail end of this assembly to get the pressure washer running, and i'm stuck at this juncture. Nobody seems to want to assist me. Many thanks to all.\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need bolt torques and valve clearences for pressure washer?


... Pressure Washers

Need to know the head bolt torque for Craftsmam Pressure Washer


... Pressure Washers

RY80940 The valve under the pump is leaking. I think it is a pressure release valve but I am not sure. I tightened it when I had to re attach two bolts that were holding the motor on the metal case then it worked for awhile then it started to leak and I lost all power. Should I tighten or loosen it or is there a washer that needs to be replaced?


... Pressure Washers

Pressure valve zealco zve3010 need valve - Pressure Washers


... Pressure Washers

I need to check the unloader valve on my Karcher 3000psi pressure washer. I was directed to your site for help. I just need to know what to unbolt to get to the valve.


... Pressure Washers

I need a pressure relief valve for a Landra Pressure Washer. Model number is SPD 5-50824E and the pressure pump model LX5050.


Here is a link to a pressure relief valve you can use for your machine.\015\012\015\012 ... Pressure Washers

Just need a part number, I have a CA-2003-HDHB pressure washer and I need the part number for the valve kit. also if you could direct me to where I might find a parts breakdown online for my machine, in case I need more part numbers. Thank you. Joe G.


... Mi T M Pressure Washers

I have a Karcher HD 3101 pressure washer. The out pressure is not working. Is there a unloader valve that needs to be cleaned?


Yes, the unloader needs to be lubed. Send me a email at [email protected] with a discription of what you just listed and I will send you a pdf file on how to repair it. ... Karcher G3025OH Pressure Washer

I left my electric karcher pressure washer it in the shed during the winter and they tell me that the housing and the safety valve need replacing. Can I repair it myself? They want 180.00 to fix it which is the price of the washer. Thanks


This needs new piston housing cover the existing one will have a crack in it. ... Karcher PSI Electric Pressure Washer

I have a 1994 3005 super hot pressure washer made by mi t m corp,i had pics of my thermostat system but my computer crashed i have a new gauge and probe ,module,and thermal stat i need to find a repair manual so i can put it back together,also i get pressure and then i lose it .is this my valves or unloader problems?


... Mi T M Mitm 3500 Psi Hotcold Portable Gas Pressure Washer

PCH2401 Pressure washer and the engine kills with pressure backup when trigger not squeezed...is the thermal relief valve in need of replacement? or could it be something else?


... Porter Cable Cable Premium Pressure Washer PCH2425

I have a troy built pressure washer leaking gas from the air filter i looked around for advice and hurd bang against the carb and it will realease the float valve i did it and it worked but should i clean out the fuel in the filter area or the filter will it harm it as it is or should it be okay? the filter was soaked in gas dry now and when it happened the gas flowed from the air intake (behind the filter) if i need to clean out in there how do it do it and if i need a new filter


Definetly replace the paper filter and yes Lowes will carry them.if it does not leak now, I would leave it alone or you will be installing a nine dollar kit.The briggs kit # is 294260 is you choose to do it anyway ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Need to find a quick release valve for euro pro 1500 psi pressure washer


... Pressure Washers

Northstar Hot Water Pressure Washer (model #157322) While using the pressure washer the safety relief valve activated venting steam and hot water from it... I immediately shut it down and let it cool down. After it was cool, I turned on the water supply again and the relief valve was still spewing water from it. My neighbor said it was probably the "unloader" valve was stuck or damaged. I called around my area and it seems as though no one services my pressure washer.. Is there a manu


... Pressure Washers

I need to know the torque specs for the rod cap on a 2750psi pressure washer


... Honda Pressure Washer PSI 3000

Torque for case/cyl bolts honda gc160 - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

The torque for head bolt for Craftsman High Pressure Washer model # 580.752410 7.0 Horsepower 2900 PSI 2.3 GPM


... Pressure Washers

Torque foe head bolt on Craftsman High Pressure Washer 7.0 Horsepower 2900 PSI 2.3 GPM Model Number 580.752410


... Pressure Washers

I have a 6.75 hp engine on a Briggs and Stratton power washer. I need the torque setting for the engine bolts.


... Briggs & Stratton Pressure Washers

Need help getting to an cleaning stuck unloader valve on a Karcher G 2400 HH Pressure washer. Thanks


The cart body makes this process a little confining but it can be carried out without removing the pump from the motor.\015\012\015\012Diagram courtesy of: ... Honda Karcher G2400HH-R Pressure Washer

Karcher K 2400 HH Pressure Washer no pressure


Http://www.landanorthwest.com/documents/instructional/spill_valve_instructions.pdf ... Karcher 2500 PSI Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer I have a deville excel Model # EXHA2425 pressure washer. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get pressure. Someone on hear had told me it was a "bypass valve sticki


You\015\012need toput antifreeze in the out/outlet or/oil then start it up you are driing out the seals allways put away with repeating this step ... Karcher 2500 PSI Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer. Is "unloader" the same as "bypass valve"? I have a deville excel Model # EXHA2425 pressure washer with a 5.0 Honda enginr. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get p


... Pressure Washers

Intermittent pressure from pressure washer (bypass valve sticking


That diagram is for a DEWALT by Black and Decker. Not Karcher.What is your model #?Thanks! ... Karcher 2500 PSI Pressure Washer

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1214 seconds