Having problems with your Pressure Washers ?

My detergent tank is cracked and when it took if off it broke into pieces


Answers :

Look in the manual for the part number of the tank. Then order a replacement.
Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My detergent tank is cracked and when it took if off it broke into pieces


Look in the manual for the part number of the tank. Then order a replacement. ... Pressure Washers

My detergent tank was cracked and when I took it off, it broke into several pieces


So get a new one or make something work ... Pressure Washers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Re: Creaftsman 2700 psi washer, model 580.752100 - I cannot use the detergent cleaning tank. The pump forces water into the tank, and it overflows onto the ground. If I try using the washer with the detergent shut-off value in the off position, the water pressue forces the valve completely out of the housing. Is there a simply fix for this or time for a $ervice call? sw


... Craftsman 2700 Max Psi Pressure Washer 23 Max Gpm

How do we install a door balance kit on our Kenmore Elite dishwasher? Model is made by Whirlpool I understand. The plastic pieces are broken. The wheel and the spring are okay but the plastic piece on the string is broken and another plastic oval shaped piece broke as well. We plan on ordering a kit but don't know how all of the pieces go together.


... Kenmore Dishwashers

Can I put a shut off valve in the detergent line to save using a tank full of detergent?


... Homelite Pressure Washer. Honda 2700 psi 2.4 GPM Gas Pressure Washer

I have a whirlpool dishwasher model du915pwsq0 a piece of the silverware rack broke off fell down inside how do i remove the black center ring to get to it i remove the spray arm and the piece under it but the black round piece will not pop out when screw is removed


... Whirlpool Dishwashers

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

When the washer is fitted up ready to use the water comes through the handle ,i took the end piece off ,the water then comes through to where the end piece fitted on,when i looked through the end piece i can see straight through so it doesnt seem to be blocked with dirt ect


Check o rings washers ... McCulloch FH160G Pressure Washer

I have a GE Dishwasher model #GSD4134Z02WW. I am trying to remove the lower spray arm. Mine is cracked. There are no screws or bolts holding the arm in the dishwasher that I can see. The new piece appears to have threads on it as to indicate that you would just screw it in place. The old piece doesn't screw/turn. How do I remove this piece?


Whack it with a block of wood and a hammer ... Dishwashers

My pressure washer is not pressurizing the water. i took the bottom assembly off the pump and there are three spring loaded plastic pieces in there. underneath these springs is a mushroom shaped plastic piece. two of the three mushroom pieces were contorted and need to be replaced. how do i get them?


Craftsman 2200 psi pressure washer 580.752341 ... Pressure Washers

I have filled the detergent tank of the Karcher k2.360 but when I start it up and spray the car the detergent does not come out water does but how do you get detergent to?


If you have quick release nozzles take the nozzle out and try it it will not pull soap with normal nozzles or under high pressure ... Karcher Pressure Washers

My dishwasher does not reset. Also it starts int he drying cycle and the detergent cup doe snot let the detergent out. I have tried pulling the dishwasher out and shutting it off for two minuted. I also took the front off to check out the consol inside but everything seemd ok. the dishwasher is two years old


Please confirm if any of the lights are flashing.\015\012\015\012The reset sequence for this model of dishwasher would be\015\012\015\012Heat Dry - Normal - Heat Dry - Normal or High Temp - Air Dry - High Temp - Air Dry\ ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a Campbell Hausfeld RBPW1810 pressure washer, It has two detergent tanks. I cann't get either to work. I just purchased the unit in June if this year and this is the frist time I am useing the unit. I followed the instructions (low pressure position on the nozzle) and the detergent came on for two second then stopped (only water then). What am I doing Wrong??? Rich From Alqonquin, Ill


Sometimes thinning the solution will help, but in any case make sure the line from detergent tank to pump is sealed, otherwise it just sucks air. I use a small hose clamp at pump. let us know ... Campbell Hausfeld 1800 PSI Electric Pressure Washer

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

I bought the Kenmore 665.110729521 about 5 yrs ago. Yesterday the two plastic pieces which attache to the top rack and slot into a plastic piece on the tub wall, broke and the whole top rack fell down/dropped. Anyone know what these parts are called and if one can purchase replacements for them and if so where? Appreciate any help.


... Kenmore Dishwashers

Broken Piece The center piece that comes up during washing cracked and has come apart. Is this a replaceable part? I am reluctant to call a repair man to pay him to tell me I need a new machine!


... GE 24 in. GSD5930 Built-in Dishwasher

Hose connections I have a McCulloch FHH18A pressure washer. Does anyone have a diagram showing where the ends of the hoses for the two tanks should be attached at the tank selector? I took it apart and neglected to make a diagram for reference.


... McCulloch FHH18A Electric Pressure Washer

I recently found the upper spray arm in the bottom of the dishwasher after running it. I can't see any piece broken off of it but I also can't see any way to put it back on. I suspect some small piece broke off in a very clean break and I just can't see it. Is this fairly easy to purchase and reattach myself? I can see the holder for it screws in and out easily.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire FGHD2433K 24 in Builtin Dishwasher

Dishwasher GSD2030F03WWSA735136B Model Series number;Piece fell off inside front panel, making it impossible to turn on dishwasher at all..so I took off front panel screws, opened dishwasher and saw white plastic piece but can't find where it goes but it must have something to do with turning the knob to start dishwasher because the knob won't turn now..so it must attach inside somehow but I can't figure out where it goes...help!!


I think you need to get a new knob, write down the model number and make and take the pieces to your local domestic appliance supplier, there might be something similar in stock. Now I do mean the kind of small supplier that understands this kind of ... Dishwashers

A glass shattered in a thousand pieces in the dishwasher. I cleaned and vacuumed everything except the very bottom that I can't get to. I took out 8 screws, removing the round rotator piece at the bottom, but that still doesn't get me into the very bottom where I'm certain there is still glass. Question #1 - Will leaving the glass down there hurt anything? Question #2 - If yes, how do I get the rest of the part off without damaging it? I have a 10+ yr old Model DU920QWDB3 Thank y


The glass should just go down the drain from there. I doubt any piece that made it into there should damage anything as they are would have to be pretty small and as big as any food particle that could fit into there so you should be fine. If you rea ... Whirlpool Dishwashers

My Aquatak 150 pro x wont draw detergent from the two small detergent tanks at any pressure or lance setting.The machine is new. I have tried priming the pickup tubes.


... Pressure Washers

My dishwasher (Kenmore Elite 665) doesn't use up all the detergent in the detergent cup - it always leaves a little behind at the end of the cycle. the dishes don't get quite as clean any more, either. I recently replaced my old water heater - we were getting lots of little plastic pieces in our faucet screens. I'm guessing that the water pressure may be low, and that it may be due to the same problem. Is there a screen-type filter that filters the incoming water, before it enters th


I don't believe you have a screen at any water feed and doubt that would be the problem. Once the washer fills the pressure to the cleaning arms is provided by the pump itself. I have this issue every couple of months due to hard water and the calci ... Dishwashers

I have a detergent tank and cant seem to get detergent to come out what do I need to do?


Dear bug4222,\015\012I have never worked on your type of machine. But generally this is what you do. Disconect the pipe from the inlet to the machine. Attach another pipe and put the other end in a bottle of water. Start machine and on low p ... Campbell Hausfeld Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0527 seconds