Having problems with your Pressure Washers ?

Husky Power Washer Parts

\015 The part is inside the wand the part number is \015\012Part No. 0010-055-2 PA66GF30. This part has a small hole on the bend that the trigger valve is controlled from. If the part is available please reply stating price etc. Regards,\015\012Warren Merrilees at e-mail [email protected]\015\012Thank you\015

Answers :

Repair Help & Product Troubleshooting for Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Husky Power Washer Parts


... Pressure Washers

I need a replacement part for a husky 1650psi power washer


If this is an electric pressure washer more than likely they are not going to have a replacement pump. We would need a model number to better assist you. ... Pressure Washers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

Husky power washer 2000 is not getting power - Pressure Washers


... Pressure Washers

Husky 1650 PSI power washer hose got brittle and broke.


If the $$ that you Husky Dealer is asking is to tall, try a garage that make brake hoses. Take the hose with you and many times they can remove your nozzle and install it on a new piece of hose. MAKE SURE that they understand that this hose is for ... Pressure Washers

The cable in my Husky Gas Power Washer wont pull start


... Honda Pressure Washers

Spare parts for union petrol power washers


I am looking for a spare part for a union power pressure washer where do i find them? ... Pressure Washers

I need an owners manual for a husky 80714 power washer


... Pressure Washers

Husky power washer no presure? - Pressure Washers


Found an easy solution to my problem. Was dumping pressure out the bottom when I pushed the trigger. Turned out the line my hose reeler that my hose was running off of was kinked. Only partial pressure was going from the house hose to the pressure wa ... Pressure Washers

I OWN A COLEMAN 1500 POWERMATE POWER WASHER. AND NEED TO PURCHASE EITHER AN EXTENSION OR A NEW HOSE AND WAND COMBO OF 50 FEET. THE REASON BEING THAT I AM HAVING DIFFICULTY WASHING THE UPPER PARTS OF MY 3 LEVEL HOME. THE HOSE ATTACHMENT IS A TWIST/TYPE AND THE WAND/HOSE IS ALL IN ONE. CAN ANYBODY GIVE ME A RESONABLE AND ECONOMICAL SOLUTION. ALSO WOULD THE ADDITIONAL HOSE HAVE ANY NEGATIVE IMPACT ON THE WASHER AND ITS CAPABILITIES? THANK YOU IN ADVANCE


Here are a couple of links to the stuff you need:\015\012\015\012link 1\015\012\015\012 ... Pressure Washers

The top part doesnt spin anymore and dishes come out unclean. The sound of the washer apperas to be the same but when i open the washer midcycle it doesnt seam to spit out the water with any power? What can i do to check this? What maybe wrong Horacio


Clean the lower filters you may have clogged them or check for proper water supply to unit, not enough water will have hte same effect ... Frigidaire Dishwashers

I have a Husky gasoline pressure washer. The honda motor starts but stalls because the pressure by-pass (not the right term) doesn't seem to open and builds up pressure. I haven't tried to remove any parts yet. I think grit has got in but don't know for sure. The pump looks pretty simple and the part I want to remove for cleaning looks like a plastic hexagon nob. Will this access the by-pass or is it something else.


I think you're right about the knob, but try this:Open the water to the washer. Leave the line open, and hold the trigger down to get all of the air out of the supply and discharge lines. While still holding the trigger down on the spray gun, ... Pressure Washers

My Honda 2600 psi power washer will not pull to start. It was running great then I allowed the neighbor to borrow it. He ran the washer till it was out of gas and proceeded to refuel and at this point it would no longer start. The pull cord is out about 4-6 inches out and I am concerned about taking the casing off myself. Fearing that it may throw more off on the unit. If i take the casing off are there any spring loaded parts that will dismount? What should I do? Spark Plug? Turn


You should be fine to take the recoil off, there shouldn't be anything that shoots out at you. You might want to check the oil level on the engine, many of the Honda engines won't start unless there is enough oil in them. If your oil level is fine, c ... Honda Pressure Washer PSI 3000

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

Where do i get replacement parts for my kingcraft power washer


You can get your parts on amazon. take a look here Briggs Stratton Pressure Washers Accessories I hope this was helpful. cheers ... Ace Hardware Pressure Washers

Husky power washer 1650psi axle replacement


... Pressure Washers

The power washer leaks fro the base when pressure is applied. I removed the bottom housing and the round gasket that houses the bearing is badly damaged. I would like to obtain a repair manual and possibly order some parts. email [email protected]


... Pressure Washers

Where do you buy your titan-pro power washer parts from?


Hi,\015\012\015\012You can contact Titan Pro via any of the following:\015\012Post:Titan Pro Ltd,2nd Floor, 145-157 St John Street, London. EC1V 4PY \015\012Telephone: DEDICATED SALES LINE +44 (0)845 6800 9 ... Honda Maxus Pressure Washer MX5222

I have a Husky 2600 PSI power washer with the Honda GCV160 engine that I can't get to start. It was okay when I purchased it from Home Depot last spring but now I've tried putting new gas in it, spraying carb cleaner, new spark plug, and it still won't start. I only ran it for about 30 minutes when I first purchased it. The guy at the service desk at Home Depot told me that the water hose should be attached and turned on while trying to start. Is this true or would this be starting the motor und


You can eliminate the motor by unbolting the pump from it and then if it will start the problem is with the pump or the unloading valve.If it does not start with the pump removed then you check for spark and get the carb cleaned or have a kit put in ... Karcher 2500 PSI Pressure Washer

I bought a h-1600 husky power washer. Inside a broken looks like a trigger switch with clear plastic cover that open & close water output.


... Pressure Washers

Took gun assembly apart on Husky 1750 Power Washer. Spring fell out, where does it go? Looking for gun assembly schematic.


... Pressure Washers

What size of o-ring do I need for the Husky part close to the garden hose input where there are multiple o-rings. My washer tank is leaking and I have determined one of the o-rings is shot. I don't know what size to buy or where to buy it.


... Pressure Washers

My Honda power washer has a crack in the aluminum part and leaks water. Can this be sealed somehow?


You could try JB weld ... Honda Pressure Washer PSI 3000

Coleman power washer PW0912201. Water is blowing out of the chemical pickup tube when water hose is turned on prior to starting. After starting the water realy blows out from there. Would the unloader be faulty? I tried to pull out the unloader stem assembly from the manifold but it appears to be pressed in. Do I need a new manifold kit? or am I looking at the wrong part to correct this?


... Coleman Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0663 seconds