Having problems with your AEG 18 in. Favorit F54850 Slim-Line Free-Standing Dishwasher ?

AEG Dishwasher 54850 not heating up the water is no getting hot


Answers :

This could be the electrical element (some use the old traditional element and some (later models) use inductive heater coupled in line with the hose feeding the top sprayer arm. A test with an Ohm meter should indicate if the element is open circuit.
Repair Help & Product Troubleshooting for AEG 18 in. Favorit F54850 Slim-Line Free-Standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

AEG Dishwasher 54850 not heating up the water is no getting hot


This could be the electrical element (some use the old traditional element and some (later models) use inductive heater coupled in line with the hose feeding the top sprayer arm. A test with an Ohm meter should indicate if the element is open circuit ... AEG 18 in. Favorit F54850 Slim-Line Free-Standing Dishwasher

I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

Even though I turned up the thermostat on my hot water heater, the water in the dishwasher does not seem to be hot enough. Mold is growing in the food grinder and even though I choose the heat dry option, the dishes are never dry. Yet, when I touched the element, I got burned. The dishes are not getting clean because it doesn't seem to be hot enough to cut the grease.


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Hi ,i have a aeg f64570vi dishwasher water does not get hot


... AEG 22 in. Favorit 64570Vi Built-In Dishwasher

Dishwasher issues dishwasher runs but water does not get hot and wash cycle continues endlessly until stopped or rest. Do I have a water heating element issue or a controlling PCB issue?


You should always turn the hot water faucet at the kitchen sink first before starting dishwasher. If you don't your entire wash is cold water. This will also cause the water temp mode to take forever to heat the water to the 140 that is factory set. ... Dishwashers

I have had a repairman come out and look at this and he says all the diagnostic test say everything is okay. My problem: my dishes come out dripping wet...like it hasnt dried anything. Sometimes dishes are still dirty. I don't think there is any heat getting to anything. I run the water in the sink beforehand to try to get the water hot. I used this dishwasher for 1-1/2 years with no problems and now I have this problem. What is going on?


I am having the same problem but do not see any posted solutions. Have you solved this problem? ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher

ADP6000WH/ADP6000IX--Whirlpool Dishwasher.(new) My problem--Water not getting hot--i have it connected to the cold water--should it heat the water ?


Error 3 not heating..on wix6000 /or / ADP6000WHsame boards .rip out the the main mother board ... Whirlpool Dishwashers

Our Whirlpool KUDP01ILBS2 dishwasher isn't working like it used to. Dishes seem to be getting partially clean, they aren't getting dry at all and it seems they may be being rinsed/washed with dirty water. There is plenty of water in the machine when I interupt the cleaning cycle. I always run the hot water in the sink before I start the dishwasher so the first water into the dishwasher is as hot as possible. Also the sani-rinse light is flashing when the cycle "completes".


Heat that is retained in the dishes is largely responsible for drying\015\012in this dishwasher. Since plastics do not retain heat very well, they\015\012will not dry as well as glasses, ceramics or metal dishes. Rinse aid\015\012must be used so that ... Dishwashers

Hi, our dishwasher runs too long and smells bad. Seems to get stuck for along time during the heating period. The water coming in is hot enough but then after heating it for a long time seems to be more luke warm. Thanks, joe


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

I have an older kenmore dishwasher, almond colored, that the water will not run into it. The heat coil still gets hot as heck but no water. Any clue as to what it needs?


... Kenmore Dishwashers

Dishwasher temp. current the dishwasher temp. does not seem to get hot enough to clean dishes. The water temp. for the house is fine, so im wandering if the thermastat or the heating element needs replacing?


I have same problem, but I have started to use the high temperature wash and this works well. It probably uses more hot water. ... Whirlpool GU2400XTP Built-in Dishwasher

I have a lx30h dishwasher and the problem is that when i turn it on the first time,normally it should fill the sump and wait to fill after it has reached 166 deg .so whats happening now is that it fills only 2 seconds and tries to heat the water but there is not enough to water so the element gets hot and the high limit does it's job.what do you think of my problem.i have never seen that before good luck and i can't wait to have the answer best regards sylvain ouellet


Hi\015\012\015\012\015\012To correct this make sure the water inlet hose is firmly connected and is not kinked or blocked. Clean the inlet hose and inlet filter (inlet screen). If this doesn't resolve the issue then check the ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a 2 year old Electrolux ESL 63010 dishwasher, and it worked perfect until a few days ago, when it did not wash cleanly and the dishes came out cold. I read a few forums and it seemed to indicate the heating element. So I ordered one a fitted it, but still the water is not getting hot, or drying the dishes after the complete cycle. I have done a visual check of the PCB board, which looks clean and good. No error sounds, and it completes all programs, but with cold water and no drying. W


... Electrolux Dishwashers

New dishwasher installed and heating element is not heating and get no hot water. Hose and electrical are connected.


On the bottom of your dish washer you can check if the heating element is getting power, if not you have few thermostat next to it (they might be disconnected from the instalation) or they might burn. check them when the power is off for continuity.. ... Dishwashers

I have a GE GSD2000J01WW Dishwasher in a building with low water pressure. The inlet hose is 3/8" OD. The heating coil gets too hot and gives off a bad odor as there is not enough water at start up. Is there a way or a replacement part that can be used to change the timing of the heater and wash cycles, etc.? Thanks


... GE GSD2000J Dishwasher

It appears that the dishwasher is not getting enough water. I have made sure that there is nothing blocking the door area so that the soap can dispense and I have reduced the amount of detergent to maybe a 1/2 Tablespoon. Have tried both powder and liquid detergents. Ran a sani clean cycle with the Jet Dry product for dishwasher used in the rural. I also run the hot water in the sink prior to starting the dishwasher to ensure the water is hot when it comes into the dishwasher. The detergent


Hello,Welcome to FixYa.Based on your description you`re experiencing the ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

I have a whirlpool dishwasher DU915WKSO: when I turn the dishwasher on, the heating element comes on but no water comes into the unit. I recently replaced the garbage disposal and th dishwasher worked fine for a time or two. Since then I have only been able to get water in it once. Like I said, the heating element works but no water in the dishwasher. Thanks for any help.


... Whirlpool DU1055XTS Built-in Dishwasher

AEH Favorit 50730 dishwasher seems to work fine other than the water never gets hot. Is it easy to replace the heating element or whatever that could be faulty?


We had the same problem with our dishwasher. It was filling up with cold water from the hot water line. Our plumber told us about Redytemp that would pump out the cold water in the hot water line just by pushing a button. We got one and installed ... AEG 24 in. Favorit 50730W Free-standing Dishwasher

Hoover d820 dishwasher water not getting hot heating element tests ok where is thermostat and how do i test


... Dishwashers

I have a Bosch SHU53513UC/U12 dishwasher. My initial problem is that the washer smells bad after a cycle and I've noticed some water sitting in the bottom of the unit. After running a diagnostic test, it results in a "2" heating fault. I followed your advice and used a current coil to and attached it to the GYBK-a1-3 hot wire on the control board. After running the test again, it only gets as high as 1.15A and manual says it should reach 11A. What should I do next?


Hello,Welcome to FixYa. ... Dishwashers

Bosch dishwasher, Model SMU 7056, UC 09, FD 7309. My older unit has operated flawlessly for years. Two days ago it started to "stall" in one cycle and not progress to the next, e.g., stayed in the wash cycle and would not move on to rinse. In addition the heat generated in the machine was way below normal. A repairman told me that if the water doesn't get hot enough, the unit will not move on to the next cycle. I always use the "Regular Wash" option, but tried other options such as 'Economy


... Bosch Dishwashers

How to test heating element on a sb915sj*06 dishwasher water not getting hot is this the common cause or something else


You test any element with a Multimeter set to OHMS, you should get a reading below 6 - 14 OHMS if it is MORE it is shot, if it is Less, by say half it is shot. If it is "Open Circuit" it is shot.\015\012\015\012To know exactly what the, any, E ... Dishwashers

Water not getting hot - AEG 24 in. Favorit 40850 Free-standing Dishwasher


Is it hooked up to hot water line ... AEG 24 in. Favorit 40850 Free-standing Dishwasher

Hi my AEG Favourit dishwasher has no hot water. Thinking it must be the element after reading other posts. Any idea how a young lady witha useless hubby can get this changed. I want want to have to call out.££££


1 st change the useless hubby !! Get a good hubby who can check the element (sound like it is open circuit) with an ohm meter. This will show a few ohm's is the element is fine and infinity if the element is open circuit. ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2508 seconds