Having problems with your AEG 24 in. Favorit 60820W Free-standing Dishwasher ?

Waterpump is on, C3 code is on, cannot stop it. Tried all the ways to restart it. No water left. Saw on Internet somewhere there could be a shortcut in the control module? Opened it, but couldnt see anything. Would have been nice with answer in scandinavian, preferably in norwegian, if possible. Thanks.


Answers :

Repair Help & Product Troubleshooting for AEG 24 in. Favorit 60820W Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Waterpump is on, C3 code is on, cannot stop it. Tried all the ways to restart it. No water left. Saw on Internet somewhere there could be a shortcut in the control module? Opened it, but couldnt see anything. Would have been nice with answer in scandinavian, preferably in norwegian, if possible. Thanks.


... AEG 24 in. Favorit 60820W Free-standing Dishwasher

I cant get me dishwasher to start i have tested the overflow switch and its fine i have also tested the water inlet valve and its is fine. but it will not fill the dishwasher with water i have even removed the hose to see if there was any blockage in the line come out from the what inlet valve. the button light up on dishwasher and the cycles work a long with the start button, i have left the door open to see if the door senor could possibly bee an issue and it tested good and function correctly


Hi.If there is no voltage to valve, then parts that can be responsible are only and all the following:Overfill switch or overfill device.Door switch.Electronic control Wiring.If the overfill switc ... Dishwashers

After starting my dishwasher ADG 9340/1 (any program) and after pumping evt. (rest)water , the machine won't take fresh water in and gives an acoustic alarm ! After opening the dishwasher , I can see that the "Start"-led is blinking in sequences of six blinks . Can you give me please, a possible cause and/or solution to this problem !


... Dishwashers

My frigidaire dishwasher FDB1502RGC4 will not run a cycle. it will fill and drain the water but will not run a wash cycle. all the lights on the control panel lightup when they should. so i dont think it is a fuse. and there is not much i can see after i opened the front door, the control module and the console assembly. could it be one of these.


Having the same problem with mine, just replaced the discharge pump last week because it went out, worked a couple days now this. still have not figured out the problem ... Frigidaire FDB1502RGC Built-in Dishwasher

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

Hello, My built-in Jenn-Air JDB5900AWB dishwasher door has lost it's springs and comes crashing open. I am pretty handy and would like to try to fix this myself, is it possible? I have a great parts store here that the plumbers use (I was the only person there who wasn't a professional that day!). Where can I see instructions to fix this? Thanks, Miss Fix It


Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... Dishwashers

Bosch dishwasher detergent dispenser will not open during cycle after I changed a burnt out control module. so changed the solenoid, still no joy so changed the dispenser? still will not open during cycle. Should the control module be programmed?


... Bosch 24 in. SHU43 Built-in Dishwasher

[email protected] Day E1 error. Opened up the filters to clean all possible blockage inside the machine. Water is pumped into the machine when starting, then there is a pause, then E1, then water is pumped out again, which does not inidctae a blockage. Opened both side panels, and flow of water is possible on the left side. What can be done next?


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... LG 24 in. LD-12BW5 Free-standing Dishwasher

My whirlpool dishwasher type 280-2 detergent door will not open during wash cycle. Yes the compartment, springs and door are thoroughly clean. Will not open if I just close the door and remains empty. I'm wondering if perhaps I knocked off some random part that makes it open. So please tell me how darn thing opens and perhaps a pic of the parts so I could see if ones missing. Thank you for any help offered for this, its driving me nuts.


... Dishwashers

Frigidaire model F71C12PHS0 is not washing, it goes through the cycle and when the door is opened the soap container is open with soap still in it. We have run it with the door open to see if it is spraying and it is. The heat is working because when we open it at the end of cycle it is hot. Yet soap is still there and dishes are not clean. Thanks to anyone who can help me trouble shoot this.


... Frigidaire 18 in. FDR252RB Built-in Dishwasher

The door on my PDW8680J00SS suddenly won't open. latch may be broker, but I can;t open the door to see what's wrong. How can I get this dorr open if the latch is broken?


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012\015\012\015\012 ... GE Profile PDW8600J Built-in Dishwasher

Opened the door of a kenmore elite 66516493300 and heard a loud bang. Then the doo fell open hard. Now when I open the door it wants to fall straight down fast. I see no springs in the parts list but assume that something counterbalances the door. Do you know what's srong and can I fix it myself? Thank you, Peter M. Bonadio


Http://www.managemyhome.com/mmh/lis_pdf/INSTL/L0408224.pdf\015\012\015\012if you look on page 24 it shows the spring and how to adjus ... Dishwashers

I have an ADB 1200 (or possibly an ADB 2200) according to the installation instructions. I lost the manual. Anyway, the door was becoming more difficult to open. Now it won't open at all no matter how hard I press on the latch. Any suggestions before I try to pry it open and probably break something? Bill


... Amana 24 in. ADB1200AW Built-In Dishwasher

- the dishes and glassware on the top rack are not coming out clean - I checked the course strainer to see if it is being blocked but don't see any thing there - I also took out the spray arm that sprays up into the top rack and ran water through it with a hose - it also appears to be free of clogs. - I don't see the spray arm spinning when I open the door during the wash cycle - - lastly, it may be unrelated, but the dishes are not coming out of the washer as hot as they used to be any i


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

Help! My dishwasher runs thru it's cycles but when I open it I find my second detergent cup still full of soap and my dishes still dirty. I have an older maytag dishwasher but have never had this problem with it. I've tried running a short prewash cycle with the soap despenser open to wash out the soap from the open second despenser but it doesn't wash it out. I know water is coming out of the spray arms but can't see if the arms are spinning although when running it does sound like they ar


Hi,\012There are three common problems that cause the Soap Dispenser or Cup not to open. I have a tip that will explain these problems in detail....Dishwasher Repair Problem ... Dishwashers

Defy Dishmaid DW12 stopped mid cycle and does not respond I checked for any moisture underneath the machine by opening the back and side panels. the only response that I do see is when the door is open the light burns but when it's closed, it is dead. By turning the program/ cycle knob nothing happens.


Exact same peoblem. Did you guys have any luck? ... Dishwashers

Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


... Dishwashers

I have a Bosch dishwasher Model SHE58C05. This model has two displays, one on the front where you can see and one with the hidden controls that you can't see when the dishwasher is closed. The display in the front all of a sudden stopped working today. Top still works but I can't tell how many minutes are left while its during the cylcle. I did have to cancel a cycle this morning because I picked the wrong one. Is it possible I hit a strange sequence and somehow cancelled this display (wishf


If you check your user manual there is a section that will guide you through turning off/on the display screen. I have tried to include the link for Bosch manual downloader but their site is down at the moment. If you do not have your manual and ther ... Dishwashers

I have a bosch shu312uc with a few issues 1. takes forever to count down (pretty sure its a control module) 2. dishes dont clean - smells terrible like bad water (could this be a result of the control module??) i checked to see if the trap was clogged, it didnt appear to be. any suggestions??


Hello Cliff, The first thing which comes to mind when I read your post is 1) your on the right trac, and 2) this is a very common occurance with B/S/H ( Bosch, Thermador, Gaggenau ) manufactured dishwashers, a failed solder on the control board, spec ... Bosch 24 in. SHU53 Built-in Dishwasher

The soap dispenser on our Kenmore Elite dishwasher (SEARS part number 8558128) will not stay closed. The little latch mechanism appears to be working, but the spring on the lid's base keeps the lid wide open at all times. I have examined the pop-up dispenser lid to see if some sort of plastic tip held by the latch after soap is added is broken off- this may be the case but I cannot see any damage where such a lip may have broken off. Does the latch catch the lid by snapping onto a plastic lip? I


Yes its probably the little latch that holds the door closed thats worn out. ... Kenmore 15762 Dishwasher

We have the same problem. At first, we were getting a horrible detergent film on everything. We thought that was because the detergent cup wasn't opening or the water was too hard or not hot enough. We kicked up the rinse agent as high as possible, switched to a liquid detergent, and only placed shorter items towards the door. The cup still wouldn't open consistently and our dishes still needed to be re-cleaned. We stopped closing the cup. No change. Why would liquid detergent leave a powder fil


You dont need a new dishwasher. it is your water that is causing the film and residue. go to www.dishwasherfilter.com. they have an awesome product that is affordable and g ... Dishwashers

Door wont close. I checked to be sure nothing is in the way. I have tried running thru the cyles to see if i could un hinge the spring but with no luck. the open button is locked iin the open position.


The door latch is broken and can be replaced. Look up the part on searspartsdirect.com and search that part number on ebay for better prices if available.Eric ... Kenmore 16522 Built-in Dishwasher

HE error My LG LD-14aw1 is showing HE error code - Heater Circuit is troubled???. (Not as much as owner!!!). I have repaired several dry solder joints in the control module, which have been causing various operating failures, but the HE problem has got me stumped. Can anyone provide me with a wiring diagram of the machine and or the control module? I'd like to trace the heater circuit to see if I can find the fault. Many thanks


From the manual: Errors: HE: Heater circuit failure.Please call your Authorized Service Center or LGECustomer Service at 1-800-243-0000(US), 1-888-542-2623(Canada). ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

Frigidaire dishwasher (Electrolux FDB750RCB0) does not move water through the hose to the upper wash/spray bar. The lower wash/spray bar has pressure enough to turn. With the dish washer out from under the counter I can see the water rise very slowly up the translucent hose. If I remove the check ball under the stem assembly in the motor in the bottom of the tub, water flows, but I'm not sure if the top bar turns then (with the door open I see water coming down from the top, but never saw


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0848 seconds