Having problems with your AEG Dishwashers ?

Aeg favorit 50860 dishwasher and the dishes are not cleaning properly. Filter has been cleaned; Finish dishwasher cleaner has been run through machine; dishes are stacked properly.. any ideas? I suspect it might be to do with water inlet valve??? but am reluctant to tackle this myself. Water is heating properly, arms are spinning and the holes are not blocked on them.


Answers :

Repair Help & Product Troubleshooting for AEG Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Aeg favorit 50860 dishwasher and the dishes are not cleaning properly. Filter has been cleaned; Finish dishwasher cleaner has been run through machine; dishes are stacked properly.. any ideas? I suspect it might be to do with water inlet valve??? but am reluctant to tackle this myself. Water is heating properly, arms are spinning and the holes are not blocked on them.


... AEG Dishwashers

I have a Bosch Dishwasher Model # SHU43C that is not washing properly. Some dishes are not being cleaned if we don't pre-scrub or rinse. There are no error codes on the panel. During the cycle I hear the pump motor starting and stopping repeatedly on about 1 second intervals. I suspect it may be starved for inlet water. I checked the inlet water line and it is clear. We use well water that occassionally has some iron sediment in it and it plugged the inlet water screen for our washing mach


Hi,\015\012It is very possible that the screen is plugged...most inlet valves have a screen just like your washer does. I would at least remove the hose/pipe and check the flow...and check for a screen. \015\012Also the solenoid can get j ... Bosch 24 in. SHU43 Built-in Dishwasher

I am having trouble attaching 90 degree brass elbow to the plastic water inlet on my new Maytag Dishwasher. Getting leaks. Teflon tape hasn't worked. Cant seem to get the washer to seat properly when everything is tightened down. Wish the water inlet was not made of plastic. It appears it would seat the gasket properly if the water inlet was made of something more durable.


Hi!!\015\012\015\012Have you tried pipe cement, the plastic to metal kind will take care of any leaks. You can find it at any hardware store.\015\012\015\012Good luck! A HELPFUL - 4 THUMBS - rating for this solution would be greatly app ... Maytag MDB8959AWS Builtin Dishwasher

I have a Viking dishwasher made by Asko. It is less than 6 months old. Today I had a problem with my disposal (water not draining through it and leaking under the sink) and ran the dishwasher, which cleaned/dried the dishes fine. BUT, since the water was not properly draining from the disposal, apparently the dishwasher was not draining properly either. A repairman came to fix the disposal before I knew about the dishwasher issue. Now, the dishwasher won't turn off "draining mode" - button pu


... Viking DFUD042 Built-in Dishwasher

Hi, I have an LG LDS4821 dishwasher and it appears to stop working properly. The dishes don't seem to be cleaned at all. It seems like the spray arms are not spraying the dishes as the dishes are still dry/dirty after a normal wash cycle. I did notice that the detergent was used during the wash, and a trail of white residue was at the bottom of the tub. I can hear water pumping into the dishwasher, but when I opened it during a wash cycle, there was a puddle of water at the bottom of the


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... LG LDS4821 24 in. Built-in Dishwasher

Dirty dishes The dishwasher does not wash the dishes properly seems to make all the normal noises but when finished its cycles the dishes are still dirty. Reading some of the other reviews sounds like I might have a inlet valve problem. Is there any way i can test if the inlet valve is functioning properly.


If water comes into machine then valve is ok.\015\012open machine when in cycle and look to see if spray arms are rotating\015\012if not, then take out and clean.\015\012spray arms only rotate with water jetting out of angled nozzle ... Dishwashers

Dishes and glass ware are covered with a light film when done. This problem just started. It appears that there is soap residue left on the contents of the dishwasher. The dishwasher is cycling properly and it sounds as if the water is being pumped and circulated properly and with adequate pressure. All of the water is evacuated between cycles.


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag 24 in. MDB3700 Built-in Dishwasher

I have a nardi dishwasher and it does not wash the dishes properly. sometimes the water does not circulate.Sometimes there is no water at all. I use the proper finish stuff, dishwash salt, tablets rinse aid. each time I call an engineer out they all give me a different diagnostic. HELP. Please


Nardi dishwaser water will not drain away after wash cycle. ... Dishwashers

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

Dishwasher does not fill with water when started. Problem began slowly with dishes not rinsing completely. Overfill float appears to work properly. Water fills pipe leading to fill solenoid but does n


I am almost certain that your problem is the fill solenoid.If it does not work, there will be no water entering your machine.I would either remove it and test it or just replace it at this point.Tim ... Dishwashers

I have a whirlpool gold model GU1500 diswasher. When the rinse cycle ends the water pumps out into the garbage disposal like it should, but then water backs-up from somewhere into the bottom of the dishwasher. The overfill protection drain seems OK...the water doesn't overflow. It doesn't have a air gap on the sink. The drain hose goes directly from the dishwasher to the inlet on the garbage disposal. It appears to be properly installed per the installation instructions. The washer is about 4 ye


Seems you answered your own question here. You need to make an air gap in the drain hose - take as much slack as possible and make a curve (upside down U) under you sink as high as you can go. Make sure you clip ot to back of the cabinet to stabili ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

My Bosch dishwasher has been failing to clean my dishes for over a month now. My dishes have a chalky film on them, my glassware is cloudy, and my stainless utensils are dingy--handwashing these items does not remove the film. The model number of the dishwasher is SH16805UC. I have tested my water softener system and that is functioning properly. My Rinse Agent dispenser is full (I use Jet Dry). I cleaned the dishwasher twice with Jet Dry brand cleaner. I tried putting a 1/4 cup of Borax in


... Bosch Dishwashers

Dishwasher Issues My dishwasher is not properly dispensing the dishwasher soap. The flap on the soap container seems to be opening, but the soap is always caked in there after the cycle is finished. I have tried leaving the soap flap open, but that just seems to deposit soap particles on the dishes in the front of the bottom rack. Also, there is often a greasy film left on many of my dishes. Is this a soap issue or a water issue? I am very frustrated! Can you help?


I would try using a different soap or less of your current soap. ... Maytag 24 in. MDB4100 Built-in Dishwasher

I have a Kitchen Aid Superba KUDS24SEBS1. The inlet water pressure is good and the dishwasher fills and starts the wash cycle, however, after the initial spray of water, it seems that all of the water drains out and there is nothing left to continue the cycle and wash the dishes. It's like it's not able to fill up enough to wash the dishes.


When "full" of water, the normal height of level is about 1/2 below the heater assy(large blackish grey coil below he spray arm).. if theres enough water in the unit nad its still not "spraying",its quite possible that your filter/chopper assy is cl ... Dishwashers

WE HAVE HAD NOTHING BUT PROBLEMS WITH OUR MAYTAG DISHWASHER RIGHT FROM DAY ONE. WE WERE TOLD IT WAS ONE OF THE BEST DISHWASHERS ON THE MARKET AT THE TIME, CONSUMER'S REPORT ALSO HAD REPORTED THE SAME AND THAT SOLD US. I WILL NEVER EVER PURCHASE ANOTHER MAYTAG DISWASHER! THE DISHES, CUTLERY, CUPS AND GLASSES DO NOT COME OUT CLEAN! I HAVE TRIED EVERYTHING FROM RELOADING THE DISHWASHER "PROPERLY", TO INCREASING THE WATER TEMPERATURE TO THE HOTTEST SETTING POSSIBLE, TO CHANGING DISH WASHING SOAP


I understand. \015\012The whole environmentally-friendly initiative represents a new type of technology, and sadly, new technology is not alway fully proven before being rushed to market. \015\012I don't blame you for being upset, but bef ... Maytag Dishwashers

Why is no water spraying on the dishes? There is water in the bottom of my dishwasher and it is draining properly, but after a full cycle before drying there is no water on the dishes and detergent is caked up.


It is possible that the\012machine does not start off the cycle because there are errors or feedback from\012the inputs. For the program to start up the main program controller must\012initiate the INLET/PUMP MOTOR/DRAIN to work\012when it ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My Siemens dishwasher takes 4+ hours to complete a cycle. The inlet water supply has been always COLD, which means that the dishwasher always managed to heat the water properly. What could be happening now?


... Siemens 24 in. SE53200 Built-In Dishwasher

I just bought a used Kenmore standalone dishwasher and ran it for the first time. The dishes on the top did not get clean and the soap did not come out of the closed soup dish. at one point I took a shower and was wondering if that might have influenced the water pressure enough to cause the problem. Is the soap supposed to open during the wash and could the poor water pressure prevent the top shelf from getting properly washed?


The inlet filter is probably clogged. Try letting it fill up. Open the door to stop it right after it starts to wash Pour a gallon or two of hot water in and see it it works better Stop and do this everytime it goes to fill up. If the door opens ... Dishwashers

Hello, I just installed a GE profile dishwasher (pwd9280n00ss) into my kitchen. I connected a hose to the valve water inlet, I connected the drain tube from my garbage disposal to the check valve flapper and then the the drain pump asm. When the dishwasher finishes washing the dishes, all the water doesnt drain out. Any ideas how I can correct this?


... GE Dishwashers

Hi there, The error code 'strong and economy light flicker fleetly' is showing. the manual says that this means too much inlet water. We have drained the machine, cleaned waste pipe and tried to operate with a reduced flow from the inlet pipe but it's still not working. I filled the base of the dishwasher with water to see if it drains properly. It seems to be draining, but also leaking out of the base as well..? Any ideas?.


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Baumatic Dishwashers

We purchased an Electrolux Dishwasher Model #EWDW6505GBO, installed on 8/3/10, and we are very dissatisfied with it, as it just does not wash the dishes clean. We have had G.E. Dishwashers, two, since 1961, and then a Bosch, and they have all worked well. It appears that the water is not getting to the top and/or properly rinsing them. We rinse everything prior to putting the dishes in, but coffee cups come out with the ring around the top. The soap doesn't fully disolve. We have tried doub


... Electrolux Dishwashers

I have a slimline dishwasher from Ikea. The model is Whirlpool DWH C10 W manual. Everything worked fine up until the other day when I switched the machine on and it made a noise as if it was working but nothing happens. No water comes into the washer although inlet pip looks fine. I have poured water in and it is drained okay but the dishwasher is not cleaning dishes. After checking through numerous forum and reading about a flood prevention switch which can be sorted by tipping the d


Ok so slow down and lets look at the d/w problem and don't take the kitchen apart.. in the tank there is a float in the front corner. lift the float and listen for the click that would be the float sw . if no click th ... Dishwashers

We have a Kenmore dishwasher, model #665-15955793, that is not draining properly. After running through the cycles there is water still left in the bottom of the dishwasher and the dishes have water spots. Is the problem with the line to the garage disposal?


... Kenmore 24 in. 16032 Built-in Dishwasher

My Ignis dishwasher ADL 348 is not dissolving the dishwasher tablet properly leaving the crockery still dirty. It is also making a really strange noise during operation. I have cleaned the filters and the water hose is not kinked, and clues? Where is the water inlet filter?


My adl 348 is 3years old. Made strange noise and didnt really wash now it doesnt appear to be washing. What would it be and is it easy fixed? ... Dishwashers

Inglis MOD#IPU58460 Dishes not cleaned properly...thought that enough water was not being filled into tub because more water added manually and washes great! I checked inlet water valve operation and lines for possible lime buildup and timed "fill" time. All was good and time right to spec! Water level after fill is just to bottom of mesh screens. Under further trouble shooting I held door open slightly while holding door switch closed to observe wash cycle and found as pump starts water shoots


The sprayer arm may be clogged with debris.Here's a step-by-step troubleshooting guide. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2323 seconds