Having problems with your Alfred Karcher K255 Electric Pressure Washer ?

What is the pressure in bar of the 2.35 K Archer

Answers :

Repair Help & Product Troubleshooting for Alfred Karcher K255 Electric Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What is the pressure in bar of the 2.35 K Archer

... Alfred Karcher K255 Electric Pressure Washer

Bosch Exxcel Diswasher SGS43E08GB/43. Top spray bar won't spin. All arms, spray holes, ducts, filters, etc are clean and free from obstructions. Water comes out of the holes on the top bar but it won't spin. Water pressure inside the machine with all the bars and ducts removed seems good. Bottom bar works fine. Any ideas please?

Try starting the washer, then opening to door and checking the water level in the bottom of the machine, as far as I know, there should be enough water there to disolve the tablet when it sits in the bottom. if not that much, bung in a few cupfulls a ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

Wickes 160 bar pressure washer - no pressure but motor working

... Pressure Washers

Honda pressure washer model # exhp3640-1 3600psi 0=13hp has low water pressure out of triggers motor does not engage for higher pressure

... Pressure Washers

I have a G2500VH pressure washer that has started to pulse when the trigger is squeezed. This happens if I use the 0,25, and 40 degree nozzles BUT if I use the one for low pressure(detergent use) it will hold pressure fine. I have changed the unloader valve, checked all the valves and seals ad they seem to be fine. What could be the problem?

Do you mean pressure on and off with the hp tips and smooth and steady with chemical tip? ... Pressure Washers

Frigidaire dishwasher (Electrolux FDB750RCB0) does not move water through the hose to the upper wash/spray bar. The lower wash/spray bar has pressure enough to turn. With the dish washer out from under the counter I can see the water rise very slowly up the translucent hose. If I remove the check ball under the stem assembly in the motor in the bottom of the tub, water flows, but I'm not sure if the top bar turns then (with the door open I see water coming down from the top, but never saw

... Dishwashers

I have a wickes 120 bar pressure washer made by lavorwash model no 186897 120 bar . have used it only once about six months ago . on trying to use it today it has just stopped working, have checked fuse and cleaned filter but cannot get a peep out of it . electrical supply is present and passing through switch , please help

... Pressure Washers

How do I adjust pressure? when i push idle bar, pressure increases but idle wont stay adjusted

... Karcher G3025OH Pressure Washer

I have a Karcher G2600 OR Pressure Washer, 2600 psi, 2.5 gpm. PN 1.194 506 0. gas engine works fine and water flows fine but pump is not adding pressure to stream. Checked and cleaned inlet water filter.

... Pressure Washers

Re Kranzle 135 : Pressures only to 80 bar . Valves ok. Water getting into pressure guage.

... Electric Kranzle Professional 1600 PSI Pressure Washer

Homelite 105 bar pressure washer - Homelite Pressure Washers

... Homelite Pressure Washers

Karcher pressure washer My Karcher pressure washer switches ON and OFF continually when I am trying to wash. It is about 6 yrs old 120 Bar 1750 PSI 420MH

... Karcher 2500 PSI Pressure Washer

Hi, ihave a miele dishwashe type G7856. the machine starts, then after a short period of time the light for filling/draining flashes and the alarm F 0 S appears. i have checked filters for water supply and that pressure is present.

... Dishwashers

Pressure builds up and then goes to 0 when trigger is pulled on wand

... Comet Pressure Washers

I just bought a used and broken Power Washer which I plan to repair and use, hopefully. I can't seem to locate operators/parts manual. NorthStar Pressure Washer ? 2400 PSI, 2 GPM Item#: 157472A Serial #: 1106 4728 Bar Code: 157472A11064720 Engine: 6 HP Tecumseh Pump: Comet VRX with brass manifold and stainless steel plungers Drive: Direct Thanks for your help.

... Northstar Pressure Washers

Top spray bar won't rotate orifices cleaned out supply pipe clean water pressure to dw adequate

... Asko D5223XXLCS Dishwasher


... Pressure Washers

Honda 3600 psi 0-13hp model # exhp3640-1 has low water pressure

... Honda Pressure Washers

I got the pressure washer started - lots of smoke etc after not having used 3 years. I then poured in wrong oil to top it off - my brother's chain saw bar oil. DARN. After 3-4 minutes it started rattling and stopped. Can't pull the chord to get started. Did it seize the engine? I have drained all oil. Can I try using a cleaner, light weight oil to try to unlock it?

Nope! you have blown the seals and most likely the cylinder is full of water. You will need to take it to the repairer to have it cleaned checked and new seals fitted. $200 ... Karcher 1750 psi Electric Pressure Washer

I need a User Manual for a Challenge Xtreme 1700 W ; 80 Bar pressure washer

... Pressure Washers

Low pumping pressure not enough to turn upper bar-rubbing noise when washing-pumps out ok

Check the arm, the hose and check the pump for any obstruction or leaks ... Maytag 24 in. MDB4000 Built-in Dishwasher

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl

... Northstar Pressure Washers

I need 0 rings for Karcher 4000 psi pressure washer. Where can I find them?

... Karcher 4000 PSI 36 GPM Gas Pressure Washer G 4000 OH

I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9

... McCulloch Pressure Washers

Craftsman 70 hp Gas Pressure Washer 580752600 dies

... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0381 seconds