Having problems with your Amana 24 in. ADB2200AW Built-In Dishwasher ?

The opening latch on the amana sofsound II dishwasher came loose. To avoid a service call, I would like to disconnect the door and haul the door to the repair shop. How do I disconnect the door? This same problem has happend before and I tried to replace the opening latch myself but I ended up having to have a guy come out and fix it.


Answers :

Repair Help & Product Troubleshooting for Amana 24 in. ADB2200AW Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The opening latch on the amana sofsound II dishwasher came loose. To avoid a service call, I would like to disconnect the door and haul the door to the repair shop. How do I disconnect the door? This same problem has happend before and I tried to replace the opening latch myself but I ended up having to have a guy come out and fix it.


... Amana 24 in. ADB2200AW Built-In Dishwasher

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

I have model 363.14779100 that has a problem. When a drain cycle is at the end and the fresh water starts coming in, the draining won't stop therefor all clean water goes right back out the drain. I can open the door latch and reshut it and the cycle will complete but the same thing happens on the next drainout. Is there a switch that needs replacing??


... Kenmore Dishwashers

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Model kudk031tbt3 I need to replace cover latch it pops out of the door during wash the dipenser door does open during wash. How would I replace latch


... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

Hi I have a dishlex supreme model dishwasher and the door latch is broken and I cannot open the door to get into it to replace the latch. Anyone know any tricks on how to get the thing open? Thanks


... Electrolux Dishwashers

I'm trying to fix a whirlpool du980qpdq6 dishwasher. The door on the soap dispenser won't open. I've checked the latch and it works...no blockage. I've taken the door apart and looked at the Wax motor in the door. Apparently that is what actuates the mechanism that opens the door. Does anyone know how to test the wax motor to see if it is functioning?


... Dishwashers

Door latch appears broken and was only able to open door by using a spoon to push down the latch. Can the latch be replaced without a tradesman


If the tongue on the door is OK and moves under spring tension then you will need a time delay door lock If it is only the latch then you could have a go. It can be awkward to fit the spring around the tongue. Have a good look at it first when you ge ... Dishwashers

Door won't stay up or stay closed. The door used to be pulled in so it would stay closed and remain latched. Now it slams downward when you open it and won't remain latched when you want it to run. Some kind of counterweight seems to have disconnected.


I did replace the door latch. I could replace the hinges, which is something I was considering, but the door will still not lock. Can the hinges affect that? It will close. ... Dishwashers

Maytag 300 Quiet series had a broken door latch. I replaced the latch, but now it won't automatically shut off when I open the door. Whaz up? thanks!


... Maytag 24 in. MDB5651A Built-in Dishwasher

The door is stuck closed on my Vulcan Dishlex 500 ECO Dishwasher. i have tried to lever it open with a spatula applying downward pressure on the internal latch w and simultaneously lifting the door upward...no joy... it simply wont open.


Hi just read your posting.What you need to do is to get a pointy small knife and put it between the door and frame and move it till you stop at the internal latch.Now lever the latch up and pull the door open.The part you need to change is the t shap ... Dishwashers

My ge profile dishwasher PDW7880RSS door latch is stuck and I can't open it -how can i open it so i can replace the latch


... GE Profile PDW9880NSS Stainless Steel Dishwasher

I have an ADB 1200 (or possibly an ADB 2200) according to the installation instructions. I lost the manual. Anyway, the door was becoming more difficult to open. Now it won't open at all no matter how hard I press on the latch. Any suggestions before I try to pry it open and probably break something? Bill


... Amana 24 in. ADB1200AW Built-In Dishwasher

Maytag MDB8859AWS, cover latch that's a part of the detergent dispenser came entirely out of the hole that the long spindle on the end of the cover latch fits into it. Does this mean the part's broken? Now the detergent dispenser won't open automatically. I can TRY and close the cover after I put the cover latch's long spindle back in the hole, but something doesn't seem right. Only three months old!


... Maytag MDB8859AWS Stainless Steel Dishwasher

The release clasp on the front of the dishwasher seems to be broken. It does not click correctly when I attempt to open the door and seems "free". For a few times, it seemed like it was hard to open but no one used a lot of force, we just tried several times and then it would open. Can this be a part I can replace myself or do I need to call a repairman?


... Maytag Dishwashers

Our Mieli Exclusive Plus Turbothermic Ultra has recently started to collect water in the ventilation unit positioned at the top left hand side of the door. I have removed the internal cover and cleaned the inside and replaced the cover but to no effect. At the end of the drying cycle there is obviously water in the unit and when the door is opened it spills onto the floor.


... Miele Dishwashers

I have an old ariston K LS 61 S - yesterday at the end of a cycle i could not get the door open! Tried doing another cycle and even turning off at the mains and back on again Door is firmly closed at the centre where the locking mechanism is


... Ariston Technologies Dishwashers

Mod gsd6209g00ww ser gf607466a i open the door to the dishwasher and there is a buzzing noise that will not stop. i tried to press the buttons to stop it. and closed the door again tighly nothing happened, also i fipped the breaker on and off and nothing happend.. please help me the buzzing noise is freakin my dog and out and it is annoying . thank you very much Jan


... GE Dishwashers

I have a Maytag MDB5601AWB dishwasher. all the switches except the heated dry switch are not working. I did the unlock thing and still nothing . Do I need to replace the switch panel or is there something I should try? I tested for power and have 120 volts coming into the circut board and through the door switch Comments: Aug 22, 2009 - I tested the door swich and I have power on both poles when it is closed. there is 2 switches on the latch but the one with power to it powers up the circ


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

The control panel on my Maytag MDBH970AW is unresponsive, and the latch is stuck in the "open" position (the plastic piece stays pushed in to the handle and won't come down). I've checked that the unit is getting power from the house. Last time I had this exact problem (when it was under warranty), they had to replace the control panel, the latch, and it seemed like most of the door. What should I do?


... Maytag 24 in. MDBH970AWS Built-in Dishwasher

Dishwasher model KUDP02CRBL3. Door latch pops open during cleaning cycles. I had a repairman replace the plastic part of the latch but it did not make a difference.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Ref: NEFF Dishwasher S5555XOGB/70 (FD No. 8602) Problem: Does not drain at end of wash cycle. Checks/Symptoms: 1. No blockage in whole of drainage system, system and filters are clean. 2. Pump does operate mid wash cycle ? drainage tube can be felt pulsing and pipe gets warm right through to the main drain connection at the ?U? bend. 3. At end of wash cycle the pump appears to still be trying to run but there is no flow, even when the door is opened. If machine is emptied by hand the pum


... Dishwashers

My dishwasher clean light keeps flashing ... turned the braker off, open and closed the door several times, as well as the soap holder, moved the latch where the door closes ... not sure what else to do ... what else can I try?


The reset sequence used was reported to be the following:1) Crack the door open.2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry3) Close and latch the door4) P ... Whirlpool GU2400XTP Built-in Dishwasher

The detergent door opens but there is always detergent left in the cup at the end of the cycle . I have tried different cycles but the result is always the samw. Detergent running down the inside of the door.


Overfilling or packing the detergent can cause this.\015\012\015\012Make sure your spray bars are FREE to turn. ... Whirlpool Dishwashers

I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that


Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1472 seconds