Having problems with your Amana ADB1400AWB Dishwashers ?

I am replacing a frigidaire dishwasher washmotor. Everyone and videos tell me how to replace the motor. In the instructions in the box they say replace the sump bottom also. Why would i have to replace the sump also and not just the new motor?


Answers :

Hello, chris
\012
\012
I was trying to help\012 you out here. I was going back to some customers that asked questions \012in the past and it appeared that no one answered them, so I thought I \012would take some of my personal time to see if I can help. Here is a link\012 to about everything you want to know about your dishwasher, from repair\012 to trouble shooting it,pictures, video's. Just scroll around and you \012will see tons of information to almost any question you might have on \012your dishwasher. If you go to this link and click around, I am sure you \012will find out so much about your dishwasher, you will know more that the\012 company that made it. Here Is the link for you to click on>>
\012
\012
http://home.howstuffworks.com/dishwasher.htm
\012
\012

\012
Please if this helped you at all, if you can find the time \012to rate my help and some kind words written would be appreciated for my \012free help , I would appreciate it. Here is also my direct link to my own\012 pages of other areas of my expertise for other problems you might have \012in Automotive,Appliance, and Electronics. Drop In anytime for my help. \012Thanks,Mike
\012
\012
http://beta.fixya.com/users/mc1bean
Repair Help & Product Troubleshooting for Amana ADB1400AWB Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am replacing a frigidaire dishwasher washmotor. Everyone and videos tell me how to replace the motor. In the instructions in the box they say replace the sump bottom also. Why would i have to replace the sump also and not just the new motor?


Hello, chris\012 \012 I was trying to help\012 you out here. I was going back to some customers that asked questions \012in the past and it appeared that no one answered them, so I thought I \012would take some ... Amana ADB1400AWB Dishwashers

I have a Kenmore Dishwasher Model #665.168790000 and the water fills just fine and empties fine when cancelling cycle but when pressing any wash cycle the pump/motor just makes a loud humming noise and does nothing. I took apoart the lower assemblies to clean everything out but the problem hasn't gone away. Do I need to replace the motor or the whole motor assembly (also contains impeller kit)??? Also, I don't think I need to replace the whole sump & motor assembly do I???


... Kenmore Dishwashers

The dishwasher is making a horrible noise. Could it be the motor? Tried running both drawers and same noise each time. About how much would it cost to replace motors? Would I be better off getting a new dishwasher?


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Dishwasher 66513752K601 keeps blowing the thermal fuse. (Bi-Metal W10258275). I have replace the Thermal fuse several times. After i replace the fuse for some reason after a few months or less it will blow it out again. I have also replace the front panel assembly after it stopped working correctly. I would like to know how to test the dishwasher to find out the root cause of the fuse issue. I don't want to be replacing the fuse every time and don't have the $$ to buy a new dishwasher. Everythin


... Dishwashers

The little actuator type motor in the dispenser goes off buzzing like crazy and its random. This motor is used to open the dispenser door. I bought a replacement dispenser assembly which includes new motor and it still has the same random buzzing sound. Would this be some type of issue with a relay or something?


Hello.\015\012Thank you for using Fixya.\015\012\015\012this is the troubleshooting of your problem:\015\012\015\012Unjam the motor \015\012Unjam the pump \015\012Test t ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

I have a McCulloch model number FHH18A/FHH20C. The brass fitting that comes out of the pump has broken. It's brass and plastic. McCulloch claims there is no replacement part, except to purchase a new pump and motor. Is there any after-market check valves that would replace this fitting/valve?


... Pressure Washers

I have the two drawer model dish-drawer system. In the past the top seal leaked and since has been replaced with a new seal. Worked well for several years after but then the top drawer quit running. So we started to use the bottom drawer. That was fine for awhile althought it would pump waste water into the top drawer. Now neither drawer will work. The bottom drawer starts up and shuts down. I pulled the lower drawer and it is dry.


If your model has got an LCD display are you able to record what shows up on the display when the bottom drawer shuts down. If no display then are you able to note down the LEDs which are on inside the top of the drawer lid. It is likely there is no ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Lately the soap remains in the dispenser, dried and caked in (I have to dig it out with a sharp object, as it becomes a solid piece). I have also tried gel soaps, but find them in the bottom of the dishwasher, partially intact. The mistery is this does not happen all the time, but most of the time! I've checked the water pressure and the water temperature: both seem to be fine. The dishwasher does run a full cycle. Is it time to buy a new one? Would you also be able to tell me what year this mod


... Frigidaire 24 in. GLD3450RD Built-in Dishwasher

Motor removal Our dishwasher (Model LDS 5811WW) has LE come up when you turn it on. We were told by LG that it needs a new motor...so how do we get one? Also do you have any instructions as to properly getting it out? The clsest repair person suggested is 1 hr. from us and it would cost 3/4 of what the diswasher cost originally.


I am having a same problem. You can open dishwasher sump assembly from inside the dishwasher and check if something is blocking white impeller. I tried to open impeller and sheared screw head as I did't realized it is left handed screw. Even after cl ... LG 24 in. LDS 5811 Built-in Dishwasher

I have a Smeg dishwasher SA660 EB. Still like new . Hardley used but have problems with the timer switch not progressing past 5 and also had the thermostat replaced as a loud bang heard and the machine did not work. Since warranty on repair run out it sounds like water is leaking around the thermostat through onto electrics as loud bang noise heard again . I found the thermostat just pushes up into the rubber seal in the bottom of the dishwasher. I have taken out the rubber seal as this also loo


... Smeg Dishwashers

I have a haier dishwasher model WQP12 AFM, I've replaced the wash pump motor and drain pump (they had been damaged with water after last repair person didn't put widget around drain hose which split and water accumulated on bottom). It well for about two weeks, then it would not go through it's cycle and I noted water not heating up. Have checked element with meter, thats fine, I replaced timersince it wasn't going through its cycle and that has not changed anything. Any suggustions?? Cheers


... Haier Dishwashers

Asko d1976 soap dispenser doesn't open/deliver soap during the cycle - no error codes/water pumps & drains ok Do I need to replace the module or is there a wax motor that needs replacement? Is there a service/repair manual out there for askos? I also have an asko washer (6021) & dryer (T721) so having a service manual would be handy!


... Asko D1976 Built-in Dishwasher

F&P DD603i Greetings! My mother-in-law went to use her 18-month old Fisher&Paykel DD603 bottom drawer today (Thanksgiving) but it started beeping and showed an error with the motor. From the messages here, it looks like you may have a service manual for this unit? If you do, would you be kind enough to forward it to me also? My mom-in-law would greatly appreciate it, and I could probably get an extra slice of pumpkin pie!! Thanks, Craig [email protected]


Service manuals can be found at http://www.fisherpaykelparts.net ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

We require a wheel for the bottom basket of our AEG Dishwasher - model Fav 6050 i. We would also like to replace the cutlery basket. If you are able to supply these parts, please give us the cost including freight to Queenstown. Many thanks


Try this link for all the parts you require http://www.nettoparts.co.uk/shop/dishwashers-6s.html ... AEG Dishwashers

My new Frigidaire dishwasher (FDB2415LFC) has not been used but is out of warranty. It has a leak with water dripping from two connectors (may be the heat coils) attached to the bottom of the dishwasher (located in the center). Why would water be dripping from this location and what is the repair solution? Should I try to return the dishwasher and obtain a replacement?


... Dishwashers

My 12 yr old KitchenAid -Sculptura-Model KUDR24SE starts to fills with water and then does nothing else. It will eventually go through the cycles on the panel, but nothing is happening inside. End result is still dirty dishes with water sitting in the bottom that has to be baled out. Cups on top rack don't have any water on the indentations, so it's obvious that the thing filled with water and that's it. I had the motor replaced (supposedly with a new) one 2 years ago so I find it hard to bel


... Dishwashers

Our GE GLD5900 dishwasher's coarse filter, the large filter on the bottom ,is warping up. this allows food and other particles into spray arms which then fail to circulate. I don't think the fact that it is warping up is good for the pump eitehr since harder particles are not going into the sump for grinding at end of each cycle but circulating though pump. Although this part is cheap, shipping is not, andi I replaced it last year. the new one warped up as well a few months later and is no lon


I found the fix! I have a GHD6711N10, with the same problem. I was in Lowes Edmonton and found a GLD6964R10 dishwasher (same parts,looks identicle,different option on panel) with a steel coarse screen and silicone seal on it, plus the sump intake wa ... GE GLD5900NWW / GLD5900NBB / GLD5900NCC Dishwasher

About a 3 year old maytag stainless steel inside dishwasher, not cleaning, often soap resdue on dishes or silverware, I use fresh new cascade, checked to see if washer fills with hot water, seems to up to the bottom of the door when I open durning cycle, arms go around, no obvious plugging of the screens, no junk in the foot chopper propeller, no paper or plastic or food in the jets of the arms. Motor went out on it 9 month ago and I had it replaced by appliance repair station here in Missoul


Water must be 130 Deg F to wash properly. ... Maytag Dishwashers

Hey guys, I am a dishwasher repair guy in barbados, the caribbean. I am having problems with a Hobart LX30H. the relay board is doing half the things right and the othrs not at all. I replaced it with a new one and the same results. At startup, the wash sump heater and wash motor are running, but the fill valve, drain valve and rinse booster are not running. Hence the startup operation is stalled. the funny thing is that the rinse booster and fill valve led's on the relay board light up at


Not sure what sort of problems (fault codes etc) you were having before you chose to go on the path of replacing the relay board.\015\012\015\012It might help to know what fault codes you have been noticing.\015\012\015\012One ... Dishwashers

My ESL 6115 ssems to be stuck between cycles, it beeps as its finished the cycle, but it still has water in the bottom, and wont accept a new cycle, so not working also the light at the top righthabd side of the door with a sign of an arrow pointing at a straight line is constantly flashing. your help would be greatly appreciated!!


... Dishwashers

I have a GE dishwasher (GSD4020Y70BB) new in 1996. I replaced the whole motor assembly in 2007, seal was leaking. My dishes are not getting clean now, dried food left on plates, coffee stains in cups not being cleaned. I removed main spray arm, found nothing, turned washer on and plenty of water gushing out. I took the cover off sump all clean. I removed the filter screen in the back, there appears to be a valve with some soft rubber around it. Water gushes out of this, does stop during the cyc


Have you checked the drain pump impeller and drain hose? I am curious if there is a back siphon from the drain hose or the waste outlet at the garbage disposal might be blocked or plugged with food debris.\015\012I wou ... Dishwashers

The washer is not cleaning properly, I found that the lower spray arm is fairly floppy and will tip enough to hit the element. I put a new spry arm on a couple of months ago but did not replace the cap. Do you think there would be enough wear on the bottom of the cap to cause a problem? Thanks - Bill G.


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Maytag 24 in. MDB5601A Free-Standing Dishwasher

Bosch SHU 3300. Soap dispenser not opening during cycle--and this is a brand new soap dispenser (old one would not stay closed in the beginning of cycle). Also had control panel replaced because old one started smoking.


... Bosch Dishwashers

Whirlpool dishwasher: Model DU920PWKT0; 8 years old Lately, have noticed not full drainage of water at end of cycle... about 1 inch standing (thus 2 inches at the sump). Glasses have had noticeable film on them. Ran the rinse cycle a number of times to explore problem. When I interrupted the cycle, the water on the bottom was soapy, yet no new soap had been introduced. I even colored the water "left" in the tub to see if it was replaced by fresher water. Although it was going through t


Find the 'tech sheet' behind the front 'kick plate' of the machine. This doc will give you a troubleshooting procedure for that specific machine. Check drain line and make sure it's clear and not kinked. Is filter clean?Has machine ... Dishwashers

Hi on one of our offshore rigs we have a AMX-16 dishwasher we require a parts manual for this machine so that we can order a new bottom spray bar we would also like to have a user manual for this machine


Hi rrydlewicz\015\012\015\012I am on the Total Dunbar in the North sea Northern sector. I have an intermittent fault code problem I would like to solve, did you ev ... Hobart AM14-253 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1388 seconds