Having problems with your Amana Dishwashers ?

NOT DRYING WELL - Amana Dishwashers


Answers :

Add more rinse aid and check the heater is working. The dishwasher uses steam to dry the dishes.
Repair Help & Product Troubleshooting for Amana Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NOT DRYING WELL - Amana Dishwashers


Add more rinse aid and check the heater is working. The dishwasher uses steam to dry the dishes. ... Amana Dishwashers

New Amana dishwasher leaving (dried) food particles on the dishes/not cleaning well


CHECH YOUR DRAIN HOSE. IT SHOULD HAVE A HIGH POINT SO THE DRAIN CAN DORK PROPERLY. THE HOSE COULD BE TOO LOW UNDER THE SINK AND DRAINING BACK INTO YOUR DISH WASHER. OR YOUR GARBAGE DISPOSAL HOLE CAN BE CLOGGED ... Amana 24 in. ADB1500AWS Stainless Steel Dishwasher

My dishwasher is leaving a film on all the dishes some of the times. Other times the appliance works fine but more and more often it is leaving a white film on all the dishes as though the rinse cycle is not working well. I have tried filling the jet dry compartment and have been using the same jet dry and detergent as always. The dishwasher is about ten years old and has been working well up to a few weeks ago. Ideas?


Check inlet water quality & whether softening salt is required. Check and fill rinse aid. refer user manual. ... Maytag 24 in. MDB3700 Built-in Dishwasher

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to res


... Whirlpool 24 in. ADG7540 Built-in Dishwasher

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to reset the


... Whirlpool GU2400XTP Built-in Dishwasher

I have mold in my dishwasher. This happened about 6 mos ago and I used the vinegar and scrub method to get rid of it...it was a pain in the fanny! Now the mold is back...the dishwasher has also not been drying the dishes very well either, although in truth it never has. There must be some other reason that the mold is back! Oh, and I've used Jet Dry since I bought the machine 7 years ago, and have tried the ''leave the door open to dry the dishes'' .... any thoughts?


Get rid of the mold - Pour about 2 cups of bleach in the dishwasher with about 1 cup of salt, and a gallon of cold water, use the light wash, not heated. Make sure when you start the cycle it doesn't drain first or you lose the bleach. Also I don't ... Dishwashers

Our Miele Incognito dishwasher was installed in our new home in August, 2005. The wash/dry cycle has always taken a very long time - 5-6 hours is now the standard. So we have gotten accustomed to only running the dishwasher at over night. However, for the last few months, we've noticed the dishwasher is no longer drying well - we also need to finish drying the plates, glasses and silverware. Do you recommend we have a service call?


Yes, absolutely. The timer motor is not functioning right for it to stay on like that. Could be other control issues too. ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Dishwasher I read your site and I bought a Kitchenaid Dishwasher two weeks ago, my 6 year old Jennair died. I paid 800.00 dollars and the Model is KUDK03FTBLO ser FU2602019. I have this same problem posted by kayzy on Feb 05,2007 We are having to hand-dry our dishes. The tops of the drinking items on the top shelf contain more water than usual, and the items on the bottom shelf are needing hand-dried as well. I have called kitchenaid and service no one will help me they keep telling me t


Get valves on both cold and hot water coming into the dishwasher, I would first turn the cold all the off and the hot midway ....now try it.\015\012ps: it might only have a hot coming in.\015\012if still problems keep turning that hot down perhaps to ... Kenmore 18 in. 14432 / 14439 Built-in Dishwasher

Run on the normal cycle the dishes come out smelling "fishy". I refill the jet dry every 2 weeks--it always seems empty and I know that's not normal for dishwasher use. Even the empty dishwasher has a "smell". Our water is excellent for drinking--it is not well water and has no odor. Please advise before I have to buy a new dishwasher. Our dishwasher is a Quiet Partner II.


Check the main drain, wher you are connecting the drain hose. ... Dishwashers

I have a Frigidaire Ultra Quiet II dishwasher that gets stuck in the 6:00 position (between light wash and drying) during the cycle. It also gets stuck right before the drying cycle. It will proceed with the cycle if I manually move the dial. The heated drying feature is also not working as well. Do you have any suggestions? Thank you for you time, for it is appreciated. Best Regards, Scott G.


... Dishwashers

Our dishwasher is not cleaning well anymore. It isn't drying the dishes either. The jet dry compartment is clogged I think. It won't take any jet dry.


... Bosch Dishwashers

Dishwasher hey! i have a frigidaire dishwasher. turns on, fills up with a little water and just sits there for about 10 mins doing nothing. starts to clean then nothing some more. it drys everything but leaves the dishes totally filthy even though they are well rinsed prior. after they are dry, the dishwasher then pushes out the remaining water like it is supposed to and on into the disposal. any ideas? i cleaned the pan out completely and replaced the lower parts. thanks!


DEAR FRIEND,\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012ngfam1 here for you!\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\0 ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My wife has a kenmore quietgaurd standard dishwasher, model number 587.16149400. Our issue is that its getting so hot during its drying cycle that is melting plastic dishes. I checked and everything is dishwasher safe so it shouldnt be melting. It is even melting really thick items like water bottle lids and brand new plastic cups. it is also not rinsing well. What could be causing this?


... Dishwashers

I have a brand new whirlpool DU1055XTV5 dishwasher, installed two days ago. After the cycle completes there is about 1/2" clean standing water left in the bottom. It is not just down in the well area, the whole bottom is covered with water. This is after running a normal cycle with no other options such as sanitize or heat dry. I called Lowes, the store that sold/installed it, and they said this is normal in new dishwashers to keep the parts wet. They said as long as the water does reach th


... Whirlpool DU1055XTS Built-in Dishwasher

We haave a Frigidare FGHD2433KB1 dishwasher that we installed in September of 2010. Already it is not working and we are 2 highway hours from the place where we bought it. Sometimes the detergent doesn't open, sometimes dishes are not dry, recently the PF light has been coming on - yet no other appliance has had power interrupted. I am thoroughly disgusted with this machine and there are only two of us in the house so it get light use and we rinse our dishes well before placing in dishwasher.


... Frigidaire FDB956RB Built-in Dishwasher

Hi. I had f1 appear on my Gisher and Paykel dishwasher. Unplugged from wall. Few days later dried using a hairdryer. Took cover off pcb board and dried in there as well. There was water on bottom of cabinet so understand the F1. Problem is now, I put cover back on pcb board and tried to power up but it is dead? Any sensor.microswitch on PCB cover, or anything i may have missed? No power at all to unit? Any assistance greatly appreciated. PS - Wall socket finer as powers other appliances.


Wait.................. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have the new kenmore elite, stainless steal front....and have had it for about a year...and have noticed that the dishes are foggy even after dry and as if still dirty. The soap is streaked all inside the washer as well. I have been using Cascade Complete and jet dry.....is this the best dishwasher soap to use? HELP Karen, from California


Have you ever used a product called affresh it is sold at your local home depot and comes in two types one is for front load washers and the other is for dishwashers and let me tell you this product works great it actually cleans the inside of your d ... Dishwashers

I have a Bosch DLX series dishwasher and no manual. The heat dry doesn't work or at least not well. There is no heat on/off switch. How do I ensure the heat is on so I can stop drying my dishes by hand?


... Bosch Dishwashers

Dishwasher is not drying. At end of cycle, dishes are still wet and damp, as well as the inside. Buttons are all pushed. Also, it seems to wash for more than one cycle. Did a light wash and after 1-1/2 hrs., it was still running. Purchased a couple of months ago. Dishes don't seem to be as clean as my old dishwasher.


Hi,Check your heating element.. A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... Whirlpool MDBH969AWB Builtin Dishwasher

Dishwasher doens't clean well espeically upper rack and won't dry. i add drying agent, but still doesn't work. performance faded slowly over time


Hi, this is a common problem and its all down to lime scale the only thing you can really try yourself is to get a small needle and poke the holes that the water comes spraying out of do this on the moving parts that spin round give all the little ho ... LG 24 in. LDS 5811 Built-in Dishwasher

Dishwasher woes I used muratic acid (32 oz) in my dishwashers normal cycle to removescaling from the element. Looks great but runs poorly now. Doesn'tclean dishes as well as before. I use a rinse agent but still seeingspots and dried debris left on dishes. Example: peanut butter streaksstill left on knives. All moving parts seem to function properly so i'm at a loss.


Muratic acid???? i would have advised a food safe product like vinegear. fill to top rack with 4 glasses in each corner and run for a min to see if they fill up with water to confirm htt wateris actually spraying all around the unit, whats the make ... Dishwashers

My Maytag dishwasher model #MDB4650AWW bought in 2005 has developed several ongoing problems. The first is that the dishes get clean but there is always sandy dirty dried bits left on the glasses. The utensils are clean and the dishes in the bottom rack are clean but the glasses also have this "residue" left on them. I have tried different detergents and rinse agents. I have also added a rinse cycle as well. Nothing works. Now, I am seeing this sandy dirty debris dried bits in the bottom o


... Maytag Dishwashers

My Jenn-Air dishwasher is approx 15 years old. Now all of a sudden it's leaving a white film on everything. I've tried both liquid and dry detergents as well as jet dry, running the hot water and disposer, no detergent. Nothing works.


It is not your dishwasher actually. it is your water. they must have changed the way they were treating it in your area. hard water leaves this white film. www.dishwasherfilter ... Dishwashers

I have a adb2200awb amana dishwasher which leaving glasses with a cloudy plus grid stuff on the glass and on the dishes. i use jet dry stuff plus the talbets with jet dry in them also i put them on a 2hr wash cycle.


Hard water is the reason for the spots. There is a new product out at www.dishwasherfilter.com that is made specifically to fix this problem. It filters the water going o ... Amana 24 in. ADB2200AW Built-In Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1171 seconds