Having problems with your Asko 24 in. 1585 Built-in Dishwasher ?

Top rack will not pull out all the way

\015 My asko dishwasher is about 11 years old the top rack will not pull out all the way. If by chance it does then I can't get it to go back in.\015

Answers :

Replace the upper basket wheels - these are available as spares. If the metal runners look angled - it may be the wheels on the side of the dishwasher that need replacing. These are also available as a spare part.
\015\012Ebay is actually a good place to shop for spares of this type.
Repair Help & Product Troubleshooting for Asko 24 in. 1585 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Top rack will not pull out all the way


Replace the upper basket wheels - these are available as spares. If the metal runners look angled - it may be the wheels on the side of the dishwasher that need replacing. These are also available as a spare part.\015\012Ebay is actually a good ... Asko 24 in. 1585 Built-in Dishwasher

Top rack pulls out. Only half way - Kenmore 24 in. 15932 Built-in Dishwasher


... Kenmore 24 in. 15932 Built-in Dishwasher

Top dishwasher rack won't pull out all the way


... Whirlpool Dishwashers

TOP ARM HANGING DOWN-Dishwasher's working fine, problem is that the wash arm/spray thing at top is lower than it used to be, we only noticed because when pulling out the top rack the top arm/spray thing at top gets hit by the rack. Work around has been lifting rack up at angle to get past this, but everyone at some point forgets to do this and we are worried eventually something will break. HELP???


... Dishwashers

The top rack of our Asko dishwasher spontaneously slides forward when we open the door and pull out the bottom rack. I can't get it to catch and stay back. This seems to happen regardless of whether the top rack has items on it or not.


... Asko 1385 Dishwasher

Asko D3251 - the swivel part that is supposed to keep the top rack from coming all the way out is constantly turned the wrong way. The rack comes out and dishes get broken. Has anyone come up with a solution for this?


... Asko D3251HDSS Stainless Steel Built-in Dishwasher

My GE PDW7880G doesn't clean items in the top rack. The dishes on the bottom seem fine. I do make sure to push the top rack all the way back so it engages.


Removed the sprayer. the part that spins under the top rack and check that the holes arent clogged. ... GE 24 in. Profile PDW7880G Built-in Dishwasher

My KDI-21A Kitchenaid/Hobart dishwasher does not wash the top rack, but does fine on the bottom. It appears that water is not flowing to the top wash bar. Is is possible for only the top bar inlet to clog somehow? I've pulled the bar assembly itself and the main tube from the wall of the washer to the top wash bar is clear .


... Dishwashers

My Kenmore 13743 is 3 years old and was washing perfectly until a couple of months ago. It has become so bad that it won't clean anything on the top rack and barely anything on the bottom rack. In fact, I just pulled a butter knife out of the rack that still had butter on it! Not normal... I do not know how to remove the bottom washer arm to get at the chopper, filter, etc. Please help


Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012You are likely right on, this is very common with these unfortunately. Hopefully this will help.\015\012\015\012**Unplug the unit or turn off the powe ... Kenmore 13743 Staimless Steel Built-in Dishwasher

The spray from the pump doesnt hit the top rack and it doesnt clean the bottom rack effienctly. the pumps works and it does spray some but the sprayer in the middle doesnt extend all the way up


... Frigidaire 18 in. FDR252RB Built-in Dishwasher

I have a Frigidaire dishwasher and there is not any water coming out of the top wash arm. There is good water pressure coming out of the lower washarm. I pulled out the dishwasher and can see the water going to the top washarm through the tube and it goes up very slowly. I took out the "check ball" below the lower washarm and it worked good. I put the "check ball" back in and ran the machine on "Upper Rack" and it still does not have any water coming out of the upper washarm. It doesn't seem lik


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. Please check that there is no gunk or mold\015\012behind the filter screen and under the cover at the bottom. N ... Frigidaire PLDB998A Built-in Dishwasher

I noticed water coming from underneath my dishwasher so I pulled it out from the wall and found that underneath the factory installed installation there was a screw missing that holds the top dishwasher rack. The hardwood floor and bottom of the cabinet is ruined. While finding this problem, I also found rust on the bottom of the rack. Who do I need to speak with about this problem?


Speak with who you purchased the dishwasher from. They will be able to point you in the direction to get a replacement and file a complaint. All of this is provided you bought the machine in the last year. ... Kenmore Dishwashers

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

Top rack extends only halfway, Bottom rack seems to have no track


... Asko D1796FI Built-in Dishwasher

Top rack automatically slides out upon opening door


This links will help for sure:\015\012www.applianceblog.com\015\012 \015\012 ... GE PDW8680NSS Built-in Dishwasher

Asko 1385 Dishwasher. Top rack doesn't slide smoothly, hangs up.


... Asko 1385 Dishwasher

My Maytag dishwasher is 9 years old-- Model number MDB7100AWW, serial number 27754072ZQ It has worked fine until about a month ago, when I began noticing a kind of "scum" on the silverware and some of the dishes after completing a wash cycle. The top rack will squeak and have some resistance when pulled out, whereas before it always came out smoothly. I have always used powdered Cascade. I've tried using less, thinking I might be putting too much in. Then I got a rinse agent. These thin


We had the same problrms, and then the machine wouldn't even clean anything, we took apart the lower spinner and cleaned the plastic filters and now it works like new ... Maytag Dishwashers

Top rack not pulling out far enough - Maytag Dishwasher


... Maytag Dishwasher

Asko D1996 The top rack keeps sliding out all the way whenever the door is opened. I don't know if there are stops that have come off or what the problem is. Any help would be appreciated?


Peace friend,\015\012\015\012ngfam1 at your service \015\012\015\012It is the stops .You can call this parts house and they will help you figure out the part #'s. If they have them in stock they will sent them usually in one day. ... Asko D1776 Stainless Steel Built-in Dishwasher

Top rack in dishwasher fell out when i pulled it can you buy new clips?


Hi,\012Yes you can buy new clips...I did for mine...same thing happened to my wife...\012\012Here is a tip that explains how to buy your parts online... its easy!!\012\012How to Buy Appliance Parts Online\012 ... GE 24 in. GSD2220Z Built-in Dishwasher

The top rack is not getting cleaned. we pulled out the water spout and cleaned it, nothing.. help


It's possible that the lower spray assy is not generating the force needed to operate the top arm. Get a lower wash arm rebuild kit from any appliance parts store. Easy fix. ... Kenmore Dishwashers

Poor drying, mold building up in the tub. The condensing drying system is not working well. I pulled the unit out and removed a panel on the left side (facing washer). Saw that the plastic box that appears to be set up for moist air removal and vents to the tub had considerable mold in it at the top of one of the passage ways. Looked like it might be blocking air flow. Could this be a cause of poor drying? Can this unit be removed and cleaned? Also soap isn't dissolving. Bad board controllin


Hi.Poor drying is often caused by a faulty moisture sensor. If there is mold covering the sensor housing , that can be cause for the problem. Regarding the door detergent drawer problem, that is often caused by a defective doo ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Our 16 year old dishwasher takes way longer to finish cycles, has become very loud and now no longer cleans the dishes - especially the top rack and the silverware. We have hard water and I have run it with vinegar in a bowl 3 times and have been cleaning all the deposits I can today. It doesn't seem to be draining out all the gunk. Water flow seems ok, the arms have nothing blocking them. Any instructions for me to follow to clean out the mechanisms? Or has it run its lifespan... Thanks!


Parts are no longer available for your dishwasher. Typically - manufactures end support after 10 years.Your hard water deposits will never come all the way out. They will be "clean" for a month or so until another calcium chunk breaks free and ... Dishwashers

The top rack dishes are not being cleaned properly. It seems that the water is not makeing it way throught the feed arm, hence not being feeding the spray arm.


Hi Please check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure i ... Dishwashers

The top rack does not move smoothly.


PUT COOKING SPRAY ON THE RAILS IT WORKS GREAT ... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0709 seconds