Having problems with your Asko 24 in. D3120 Dishwasher ?

Crunching noise in dishwater

\015 My asko suddenly started making a crunching noise last night mid cycle as if it was chewing something up. I immediately stopped the cycle and turned it off. Any advice as to what I can do\015

Answers :

Repair Help & Product Troubleshooting for Asko 24 in. D3120 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Crunching noise in dishwater


... Asko 24 in. D3120 Dishwasher

Loud whining noise from the dishwater during wash cycle. noise started after about 2 years of purchase of this model #KUD102FRSS. no sound when draining. i have already checked the sump assembly and chopper, cleaned the debris, but no success.


Check this: Spray Arms Check all Spray Arms for blockage of water ports or cracks. Check for proper rack loading to avoid interference with Spray Arms during wash action. Check for proper sealing, fastening, and movement of Spray Arms. Repair as nece ... Dishwashers

Crunching Noise (older Kenmore Dishwasher (2002 or 2003))


... Kenmore Dishwashers

Load crunching noise


The motor has a 2 to 5 year warranty so if that's what the repair guy says I would go ahead and have it repaired. The noise can come from the pump, impellers or the motor. But if he's sure that's where it's coming from have it fixed by the repair ser ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

Hello, Please help. I follow recommendations for cleaning: sewer pump, cleaning arms, screens of the dishwasher. However, still machine is not working. water is not going through arms: lower, middle or top. Also, I get water into dishwater when it starts, and when I open i hear noise for water dripping into hot elements,but no water is running throughout. PLEASE HELP


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher

Our dishwasher makes a terrible jackhammering noise during the parts of its cycle when pulling water. For the longest time we thought it was our very old plumbing and that we had a pipe 'hammer' and ignored it. We have just had the kitchen replumbed and this problem has not gone away. It's very loud. The plumber said it had to do with the pressure valve in the dishwater - do we get a technicial for this.


Hello,Welcome to FixYa.Based on your description, it is indeed water hammer and ... Bosch SHU9925UC Built-in Dishwasher

Crunching noise won't start - GE 24 in. ZBD0710KSS Stainless Steel Built-in Dishwasher


... GE 24 in. ZBD0710KSS Stainless Steel Built-in Dishwasher

Dishwasher Making Loud High Pitched Noise.


How deep do you want to get into this?It sounds like the wash pump motor bearings that are worn.You can pull the unit out flip it over and wd40 the bearings in the motor or you can replace the bearings.Try to lube them first. ... Dishwashers

Having the same problem on with a clicking or grinding noise


... Dishwashers

Hello, I have an LG-2120WHU and it has been making strange loud noises when washing for some time now. Then I tried running some anti-lime through a washing program and gradually, after several washes, it seemed to lessen the noise, but yesterday the dishwasher suddenly made a very loud noise and the I decided to try a special cleaning liquid from Neophos. Strangely it seemed as if the loud noises would slowly diminish, but in stead loud sqeaking noises started to appear and after I had run th


... LG Dishwashers

Hi I have a mdb6601awb maytag dishwasher. Sometimes when it starts the wash cycle it will make a loud squelling noise. Then if you pull on the handle and stop it, the machine will start and sometimes the noise will be gone. Or you may have to do this 3 or 4 times before it will stop making the squelling noise. I do notice when I pull up on the handle to stop the machine it makes some clicking noises and then the noise goes away. Thank You for any help you may be able to give me!!!


I don't have a solution however I have the same problem with that same model. ... Maytag 24 in. MDB6601AWS Stainless Steel Dishwasher

KUDK01ILBS5), SN: FR2702809. Have used this machine 6 years and just recently experienced noise that I eventually traced down to a bad recirculation pump bearing that failed due to a small leak in the shaft seal. Installed a new pump on Friday, 4/21/10 and that particular noise is now quieted. While the bearing noise was gone, there remains a pumped water noise that is quieted by manually adding about 1/2 gallon of water within the machine. So I now believe the water level is low, possib


The water level in the machine should be slightly under the heat element. The float you refer to is only for overfill and should not be activated if the machine is filling properly (the water level should be lower than the float switch activation poi ... Dishwashers

My kenmore/whirlpool dishwasher makes a noise, sort of a grinding noise, throughout most of the cycle. I have removed the pump and motor thinking that their might be something in the pump, but there is nothing there. My guess is that the motor is making the noise, but I do not know how to tell other than by replacing the motor and seeing if the noise goes away.


Hi Thank You for usingFixYa. To start with check the pump and try to clean it out, then check drainhose for any obstruction. Also check for a bad bearing on the spray arm. Ifstill the is ... Dishwashers

Washer makes a grinding noise while running in the wash cycle. I've confirmed the rotors in the unit are not hitting anything inside the tube. The noise seems to be coming from the drive mechanism underneath. The washer continues to clean the dishes in spite of the noises, but the noises are a bother.


You will likely have to remove the pump motor from underneath to solve your problem. Try removing the lower spray arm assembly down to the deck and check the pump impeller for noises. Make sure to note the position and placement of all parts removed. ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Noise, Noise, NOISE


Barring an actual cat being inside the dishwasher, I would surmise that the motor bearings are starved for lubricant, which is something that is not normally done. Sounds like its time for a new dishwasher ... Kenmore 24 in. 17032 Built-in Dishwasher

Grinding Noise This dishwasher, the "quiet power II", makes quite a loud racket while in wash mode. I would call it a grinding noise. Sometimes, I can hit the front of it and it will stop, other times not so. And even sometimes, we can do two or three loads and the noise doesn't happen. (not often)


This is a definite fix for this problem! I used one wire tie to afix the pipe from the back of the dishwasher to the middle spray arm and wa-lah! The annoying noise is gone! ... Dishwashers

Kenmore Ultra wash makes a loud vibrating noise during the rinse cycle. Early on the noise stopped when you opened and closed the door. Now the noise continues throuhout the rinse cycle.


... Kenmore Dishwashers

My KitchenAid dishwasher (model KUD101TJWH0) suddenly is making noise from the motor area while inputing water into the unit, whether in the rinse or washing cycles but makes no noise in the draining cycles. I have pulled the unit out while still connected, cleaned any debris from the filter screen below the lower water spokes and can hear the noise very plainly by the motor but I know how sound can travel with the piping. Is the sound only coming from the electric drive motor attached to the


... KitchenAid Dishwashers

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

I have a Dishlex Global 500 dishwasher (DX500lWW*b). Woke up the other night to find water all over my kitchen floor. The hot water hose connector to the hot water tap split (bursted). The dishwater was not in operation at the time but I can only assume when the hose bursted the dishwater came on to alert me? the code on the dishwater is displaying ''oF'' - which means Incorrect fill level of fill time. I have consequently had the hose connector repaired but the display still has the code ''oF''


I found this\015\012\015\012"Hi - answer I was given by Electrolux Help was: pull machine out from under bench onto old towel, tip GENTLY onto left hand side (your left as you face the front of the machine) after it has drained, stand up ... Dishwashers

Dishwasher makes grinding noise during wash cycle (after pre-wash). noise persists for 15-20 minutes. It seems as though the inlet valve doesn't open during this phase of the cycle. adding water to the dishwasher manually eliminates the noise and water circulates through the wash arms. I'm trying to determine if this is a controller issue or a valve/pump issue.


Water-inlet valve\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012\015\012\011\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\01 ... KitchenAid Dishwashers

The dishwasher started making horrendous noises. I removed the bottom panel and narrowed the noise down to the motor (the noise starts and stops when the motor kicks on and off). How do I remove the motor to visually check it out? I thought I had all of the screws removed, but it feels like something is still holding it in place. thanks My model number is GSD4060N10SS (GE Dishwasher)


... General Electric GSD4060NSS Built-in Dishwasher

Howling noise Our kenmore dishwasher has a howling type noise but only while it washes, no noise when it is filling or when it is emptying. I have took it down on the inside and checked for anything that might be stopping the pump, but see nothing. Any suggestions? my husband thought it might be bushing in the motor but says it should do this also when it is pumping out. HELP.


... Kenmore 24 in. 16534 Built-in Dishwasher

Dishwasher is draining however the noise is constant and it sounds like there is resistance somewhere the noise is like a grinding noise?


It sounds like the water pump impeller has failed or the motor bearings have failed. ... GE Dishwashers

Grinding/Rubbing noise? My GE Potscrubber 650 just started making a weird grinding/rubbing noise. It went through the cycles just fine except for this new noise.


The unit has a "food chopper" inside the pump sump. it is to chop up "food" items and not bones, seeds or other items. you can keep running the unit and see if after 2 or 3 loads the noise goes away. ie: the item get chopped up small enough to go ou ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0353 seconds