Having problems with your Asko 24 in. D3350 Dishwasher ?

I have a 3350 and it is not getting any water. i have found out that it is not getting power from the the cord that is going to the main el board. Do i need too change the main board ore could it be something else.


Answers :

It could be a bunch of different problems. it might just be the cord but if you traced it back to the board with a tester then it most likly is the board
Repair Help & Product Troubleshooting for Asko 24 in. D3350 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 3350 and it is not getting any water. i have found out that it is not getting power from the the cord that is going to the main el board. Do i need too change the main board ore could it be something else.


It could be a bunch of different problems. it might just be the cord but if you traced it back to the board with a tester then it most likly is the board ... Asko 24 in. D3350 Dishwasher

KUDP01ILBS6 Kitchenaid dishwasher Doesn't work, except flashing lights on front panel. I have the normal light flashing. When I push any other button the cancel light starts blinking as well. I replaced the fuse, the main control board inside and it still doesn't work. Push button panel next fix? This is getting expensive. Could it be something minor? The troubleshooting papers didn't provide much guidance.


The first thing I would check is if the dishwasher is properly connected\015\012 to power input. There is a junction box under the dishwasher. To get \015\012access to it you have to remove the bottom panel. The power cord should \015\012be connected ... Dishwashers

Hiya i have a titan-pro 3600 psi and i need to buy an unloader valve cap and a 15 m pressure hose, ive already tried the main supplier for the last month and they have not been able to help me, were else could i get one from?


The number to ring pressureparts from UK is 001-800-999-2245 \015\012\015\012Hope this helps. Please remember to rate this answer. Many Thanks. ... Pressure Washers

I need a new dishwasher What do you recommend between Kenmore Elite. Quietguard Ultra. Model no. 665.77962K703 versus LG model LDF7920 I get conflicting information- a repairman we know says LG is the better make, needing far fewer repairs than Kenmore in general ( this washer I am thinking of buying was made by whirpool, I was told at the Sears store) But online reports claim LGs need the most repairs. HELP OR... do you have something else to recommend?


... LG Dishwashers

My Troy Bilt pressure washer (Model: 020296-01) idle is up and down. When I engage the trigger I get pressure for a second and that's it. If I squeeze the trigger a second later I get the same thing and so on. Is it just the idle that needs to be adjusted or something else?


... Briggs & Stratton Pressure Washers

PCH2401 Pressure washer and the engine kills with pressure backup when trigger not squeezed...is the thermal relief valve in need of replacement? or could it be something else?


... Porter Cable Cable Premium Pressure Washer PCH2425

Could someone please help me i have a lavor 160 superwash and every lance works except when i put the turbo lance on i get full pressure for a few seconds then goes low then high etc etc it has 2 be something simple so please anybody all advise needed thanks


... Honda Karcher G2400HH-R Pressure Washer

I need to find a service repair man in NYC for emergency servicing to my Fagor LVC-21W. It has literally blown a fuse or something in the base of it because we heard a pop and then saw sparks. Additionally, the tubes that take in the soap/detergent have detached themselves and nothing in getting clean. The main problem now though is that we cannot even turn it on because of the blown out fuse/part. Can someone help??


... Fagor 18 in. LVC-21W Free-Standing Dishwasher

Where could i get a replacement plug (connector) for wires that go into the main circuit board? the plug on the wire side is damaged??


These are available, at an auto shop, or hardware, electrical, store, they are a compression spade connectors. They come in a few sizes so it is best to take, an old one, to compare. They are "Crimped On with a special tool, you can also get these, ... LG 24 in. LDF7810 Built-in Dishwasher

My old Neff dishwasher S4132 is constantly taking in water even when switched off! I can drain it ( every hour!) by putting it to drain cycle but have to turn off the mains supply when leaving it even for a short time. Awaiting a plumber as the tap to isolate the supply has broken but am interested to know if a new aqua stop will solve this problem or could it be something else??


... Dishwashers

I have a Kenmore Elite 665 Dishwasher. The front control display has been partially working but the dishwasher still worked. Today when we tried to start it it will do nothing & it is getting the correct power. Would this be the control circuit board or something else?


It appears your timer/main controller/CCU has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites bec ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Am15 dishwasher problem: The pad will only turn on and off. Can't get it to cycle. Was on cycle 4 needed cycle 1. Got it to cycle 1, but now on and cycle does not work and when I push the off button it reboots to on. I put new pad on thinking it was the pad but same problem. Question: Is there a way to reset the board? should I be looking some where else? I cut the power at the breaker box to see if that might reset with no luck.


... Hobart AM15-2 Dishwasher

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

Hello, I've been working on a Bosch Dishwasher. It has no display of any kind, and there's a strange grunting sound coming from the wash motor when power is applied (like if you had just plugged it in), as if it's trying to start. The junction box is getting 120V, all connections to the junction box are fine, and the display board and the main control board are all getting the proper voltage. Now, we've already replaced the main control board and the problem persists. The tech line suggested


... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

THE SOAP RARELY CLEANS COMPLETELY OUT AND SOMETIMES THE DISHES ARE LEFT DIRTY. I HAVE ELIMINATED; 1) INCOMPLETE CYCLE. AND 2) NOT USING FRESH DETERGENT. I'M THINKING THAT IT MIGHT HAVE SOMETHING TO DO WITH THE SOAP DOOR/LATCH LINKAGE. IN ORDER TO TAKE CARE OF THIS NEED TO TAKE THE DOOR APART. I JUST NEED TO KNOW IF I'M HEADED IN THE RIGHT DIRECTION, OR IF THERE'S SOMETHING ELSE I NEED TO CONSIDER.


Hi, Just to make a suggestion before you tear into the soap dispenser, Have you tried using a liquid detergent made for dishwashers instead of the powder? If not, try this to see if this takes care of the problem. It couldn't hurt. Keep me posted. ... Dishwashers

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

How do I remove the main conduit on my GE Triton XL dishwasher? The cover inlet that traps food from going down the drain somehow came off and clogged up the drain. I got the drain cleared but cannot get the cover back on and need to move the main conduit (pipe connecting lower and upper arms) before I can get it on. Anyone know before I spend too much $ finding someone to fix it?


... GE Dishwashers

My DD 603 has burnt out the power board marked 34740453-G. It tripped the circuit breaker at the power box. It is burnt out on the board where the loom connects for the upper washer. It is burnt vertually in the centre of where the loom joins to the power board and the centre of the loom. I am wondering if something else has gone wrong with the washer causing the power board to burn out, or can i just replace the power board?


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

My 3 yr old Whirlpool Dishwasher model #du1055xtss2 wont come on or respond at all is this a control board issue or door switch or something else, help.. what do I do?


... Whirlpool Dishwashers

Bosch SHU43C Dishwasher. Where to get parts - quick? Needs a new control-board / circuit board. All valves, switches, heater appear to work. Won't run open the water inlet valve. Won't run the self-check program. Has a burnt connection on the control 'mother-board'.


1-800-944-2904 That is Bosch Company. They will send out-- next day. ... Bosch 24 in. SHU43 Built-in Dishwasher

Our LG Model LDF6810ST Dishwasher (2 years old) does not heat water any more. Dishes do not get clean and do not get dry. I do not get an error code. I assume I need to replace the control board OR heater assembly. How do I determine how to solve the problem?


It cleans poorly ------\015\012\015\012\015\012\015\012\015\012Water-inlet valve\015\012\015\012Most cleaning problems are caused by the dishwasher not getting enough wash water, so the water-inlet valve is often to bl ... Dishwashers

My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F


Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Hello, I have a Kitchen Aid dishwasher, model KUDS30IVWH3. The dishes have not been getting as clean lately, the bottom is decent but the top rack is not getting very clean. Also, when I open the door after the cycle is done, there's a bunch of detergent at the bottom of the door and on the floor of the dishwasher, like it isn't getting sprayed all over or something. Don't know if I have to check the water intake valve or if maybe the sprayers could be partially clogged.


... KitchenAid Dishwashers

Need help removing my GE Potscrubber 1130 dishwasher. This is an old unit, I have removed the front base board and disconnected the wiring but need to know how to get to the water line to disconnect that. Do I need to do it before I pull the unit out?


... GE Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1396 seconds