Having problems with your Asko 24 in. D3350 Dishwasher ?
It appears (f2) on the display when it is washed for a while, this is an 8 year old dishwasher that I have been very happy with the years ,,,,, is there anything I can do yourself.
F2 error in Asko Dishwasher means high water level. Please\015\012check the water pump for any clogs and try to clean if it is plugged and check\015\012the water inlet valve, clean its inlet. If after this the water is entering the\015\012unit and still the error is there then replace the water pump which is bad. If\015\012the water won't enter then replace the water inlet valve. Hope this\015\012helps...please post back for further assistance.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
It appears (f2) on the display when it is washed for a while, this is an 8 year old dishwasher that I have been very happy with the years ,,,,, is there anything I can do yourself. herdis sørensen
Hi\015\012\015\012 \015\012\015\012F2 error in Asko Dishwasher means high water level. Please\015\012check the water pump for any clogs and try to clean if it is plugged and check\015\012the water inlet valve, clean its inlet. If ... Asko 24 in. D3350 Dishwasher
I have a not quite 2 year old Kenmore dishwasher model #665.1322.(I believe built by Whirlpool) The motor has burnt out. That seems ridiculous to me when there is just my husband & I using it and I've had dishwashers in the past that have lasted 10 - 15 years. Anyways - we have no warranty so we thought we would try to replace th motor - but I can't find anything online. We live in south western Ontario - any suggestions of where we could find a replacement motor?
I have recently had the same problem with the same model. Do you think there's a connection? I'm going to report this to Consumer Reports. ... Kenmore Dishwashers
I have had a repairman come out and look at this and he says all the diagnostic test say everything is okay. My problem: my dishes come out dripping wet...like it hasnt dried anything. Sometimes dishes are still dirty. I don't think there is any heat getting to anything. I run the water in the sink beforehand to try to get the water hot. I used this dishwasher for 1-1/2 years with no problems and now I have this problem. What is going on?
I am having the same problem but do not see any posted solutions. Have you solved this problem? ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher
My Jenn- Air dishwasher (2 years old) used to clean great but now it is leaving a white film on the dishes and there is often residue left in the glasses as if it is rinsing with the dirty water. I can't find anything in the manual that is helping and we haven't changed anything from when it was working great. Thanks.
Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Jenn-Air 24 in. JDB1090AWS Stainless Steel Built-in Dishwasher
My 2-year-old LG Dishwasher doesn't clean the dishes well any more. It used to work great, I was very happy with it. For some unknown reason it doesn't work that way any more. The dishes come out dirtier then they were before I put them in. I had three guys come in and look at it and they all said that there is nothing wrong with my dishwasher. My water heater is 1 year old, works great everywhere else in the house, the dishwasher is hooked up the right way, by a professional, I don't have hard
The heater does not heat the water it keeps it hot check there first id say the heater or thermal is bad if both check good replace control ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher
8 year old maytag, clean lime build-up 2 times a year and all the spinning parts look clean and no wear but all of asudden the washer does not clean the dishes very well. Plenty of hot water, soap is dispenced, cleaned screan in bottom, don' really see anything out of place. what could the problem be? Thanks Rick L.
Hi,\012In you case check the heating element first...\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... \012 ... Maytag Dishwashers
I have a maytag dishwasher mdb5600awb. it is about 5 years old. it does not clean anything on the top shelf for the most part. i took everything apart and found nothing that was clogged. we tried a rinse agent and that didnt help. for 460 dollars i expected more out of this. i also had the motor replaced 3 years ago. can someone give me an idea why i cant get my dishwasher to wash dishes?
Replace the dock at the back if it is missing a piece. That solved my problem with the top rack not getting clean. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
Recently bot a home with a GE Profile dishwasher -- only about 4 years old -- it does not get anything clean -- before replacing it I was told that it might just need some "line" cleaning -- anyone know anything about that
Hello,\015\012\015\012Welcome To FixYa.\015\012\015\012Before getting into this too far I have a couple of question`s which will enlighten me in which direction to steer you.\015\012\015\012First, the ... GE Dishwashers
My Kenmore 13743 is 3 years old and was washing perfectly until a couple of months ago. It has become so bad that it won't clean anything on the top rack and barely anything on the bottom rack. In fact, I just pulled a butter knife out of the rack that still had butter on it! Not normal... I do not know how to remove the bottom washer arm to get at the chopper, filter, etc. Please help
Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012You are likely right on, this is very common with these unfortunately. Hopefully this will help.\015\012\015\012**Unplug the unit or turn off the powe ... Kenmore 13743 Staimless Steel Built-in Dishwasher
My GE Model GHDA480N00BB is approximately 3 years old. When we first got it, it performed satisfactory. Not great, but for the price we where happy. However, in the last year the washer does not clean very well and does a TERRIBLE job rinsing, leaving soap residue on 50% of the dishes when unloading. Any ideas?
Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag Dishwasher
Does not clean properly..leaves spots on glass and knifes are aways looking dirty..I use only the large dispenser with cascade powder and I fill the rinse dispenser with jet-dry..plus I always turn the faucet on hot before starting the dishwasher. NOT HAPPY WITH THIS DISHWASHER>>JUST OVER A YEAR OLD OF COURSE...I have been complaining about it for over a year to the place that sold it to me...RODGER APP, Flemington, NJ
Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The Heating Element not Working ... Electrolux Dishwashers
My bottom drawer of my fisher paykel won't drain. It doesn't look like anything is kinked. We had technicians here before to correct the problem once before but I don't know what he did. This unit is about 6-7 years old.
... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
I have a Kenmore quiet guard standard dishwasher, it is about 2 years old. There has never been a problem, but it completed it's cycle and the green light is still on the heat dry. It seems to be frozen there. It won't do anything if I try to restart or just cancel. Please advise
... Kenmore 24 in. 15689 Built-in Dishwasher
Frigidaire dishwasher I have a 3 year old dishwasher, when I went to turn it on nothing happened. No lights on control panel or anything. My wires, breaker and power source are all good. Where should I look next? Thanks Stan
Next thing to look at--considering all the power is good--although that's what I'd check on again, would be the door switch. May have to remove the control panel cover or the door interior.\015\012\015\012Try ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher
Power off I have an ASKO D3100 Dishwasher, which is a few years old now. It stopped working a while ago where the power went off and stayed off (no lights anywhere). I've checked the power point and it's okay. I've flipped the dishwasher over to look inside and I can't see a fuse or anything that looks helpful. Can someone help me troubleshoot this one?
Howdy. I suspect a power surge went through your machine and fried its itsy bitsy brain.Its time for a new one unless you have a good supplier and serviceman who will replace the control unit. Get an estimate with a closed top cost before you agree. ... Asko 24 in. D3112 Free-Standing Dishwasher
Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?
Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers
Our LG dishwasher (model LD-1416T), age about 2 years, makes a lot of noise. Could it be the motor, anything we could do to fix it? The noise is especially bad after 2 minutes when you put it on for about 3 minutes and then on and off as the cycle continues.
It would have been easier if you had described the noise I will assume it is a sort of clanking noise. If this is so check that the rotating shower arm is not catching on the basket or any part of the insideYou can usually simulate ... Dishwashers
Model #DS 602-ZW-USA-V2 At first I got an F1 on the door. I emptied it and tried seeing if there was any blockage etc. Tried it again and now it is flashing F2. Do not have the book and don't have a clue on F2 means. I am not happy with this dishwasher as this is the 4 problem in four years since moving into the house.
The F2 code on my F&P dish draw was the pump had siezed. To check\015\012remove all the dishes followed by the grey dish wrack wedged in the\015\012bottom. Lift off the plastic spray arm to reveal a grey plastic ring\015\012around the outside of ... Fisher and Paykel Dishwashers
We have a MDB4651AWW dishwasher. It is very loud, we have the bottom front panel that seals the dishwasher at the floor but cannot figure out how to install it. One way it does not fit, the other way it won't let the door open and close properly. The noise is terrible and it has been that way for three years. We don't believe there is anything wrong with the dishwasher, figure the bottom panel will deaden the sound. can you show us how it goes?
... Maytag Dishwashers
Spray arm not spinning, with clicking sound (appears no water coming in) on JDB7910 Model Jenn Air. Can it be anything other than the water inlet valve? Seems that was the problem I had with a whirlpool years ago. thanks
... Jenn-Air JDB7910 Dishwasher
We have a Hotpoint Dishwasher HDA3400Go2WW in our two year old home. It has been very loud from the start. We are thinking of replacing it because it is so loud. Is there anything we can do to it to make it less noisey? It is working fine but it is very disturbering
Dishwasher noise is such a pain, especially in a new kitchen that you need to leave just to have a conversation.There is nothing to be done to make the dishwasher quieter. Upgrading is the way to go. I now own the amazingly quiet LG LDF ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
Re:dishwasher My dishwasher was working perfect. Now, everytime the cycle is done, the detergent door is open but the detergent is sitting right there. I was using the electrosol gel pack which was working great. Now, the gel pack is sitting there when i open it. On the bottom is of the dishwasher is a lot of sand-like particles. I clean this out everytime. I haven't changed anything and am wondering why, all of a sudden, it stopped working. I've had this less than a year. Thanks.
Ginga, first of all it's still under warranty so I would call for service. Here's a few things to consider; first, I would switch back to the powdered detergent like Cascade. You want to make sure that the water entering the dishwasher is at least 12 ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher
Grinding The situation: I have had my Whirlpool DU915PWPB1 for 2 1/2 years, it isn't the greatest dishwasher but does the job good enough. Recently, the water will fill, the washing cycle will run but then when that part stops it goes into a whirring that seems like a motor is going but nothing is moving. I have removed the Filter Modual in an attempt to find out what the grinding would be. There doesn't seem to have anything in the way or under the filter. I have ascertained that the grin
Noise probably not from there when reassembled the plate will not be direct contact with screen noise is probably from wash motor itself..suggest checking owners manual for warranty info ... Dishwashers
Dishwasher Grit? Hi, I have a dishwasher BOSCH around 4 years old. It has been fine but has for past couple months been leaving a sand-like grit inside glasses and on plates. This is nothing that I can pinpoint as having come from the dirty dishes - food on anything placed in to be washed, its driving me nuts! Can you help?? Julie, Sydney Australia
Hi julie\015\012\015\012\015\012 Chances are you are using to much detergent and the water is not hot enough. cut back on the detergent and run your hot water tap at the sink first and that should fix it.\015\012\015\01 ... Dishwashers
My kenmore dishwasher will run part way thru the wash cycle, stop and the hi temp and heat dry lights will flash back and forth and not do anything else. When you open the washer it will have water in it that has not pumper out. It seems that the light wash cycle will work after trying the regular or heavy wash. The washer is 1 1/2 years old. model # 587.15259402
First cut power for ten minutes by unplugging power cord or tripping circuit breaker.If that does not work try the following reset.Press in succession:High temp-air dry-high temp-air dry - High temp-air dry-high te ... Dishwashers