Having problems with your Asko 24 in. D3350 Dishwasher ?

We have an Asko D3350 Dishwasher and the upper blade does not appear to be spinning and the dishes are not coming clean. Bottom appears to be working fine and dishes on bottom are clean. What could be the problem?


Answers :

On my d3350 it is possible to choose which tray (bottom, top or both) is cleaning.
\015\012
\015\012The button is the bottom left, and above it there are two lights. As you push this button, the lghts cycle through lower tray, upper tray and the both trays. You want both lights on.
\015\012
\015\012Also try this - take the spray arm out (it just snaps free) and rinse it out in case there are some blocking materials in the arm which are stopping it from spraying
Repair Help & Product Troubleshooting for Asko 24 in. D3350 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have an Asko D3350 Dishwasher and the upper blade does not appear to be spinning and the dishes are not coming clean. Bottom appears to be working fine and dishes on bottom are clean. What could be the problem?


On my d3350 it is possible to choose which tray (bottom, top or both) is cleaning.\015\012\015\012The button is the bottom left, and above it there are two lights. As you push this button, the lghts cycle through lower tray, upper tray an ... Asko 24 in. D3350 Dishwasher

We live on an island in the Caribbean and we have a LG dishwasher (model LDF 8812) that has worked fine for a year, but has recently stopped washing effectively. At first, the top part dishes were coming out still soiled from food. Now the bottom part dishes are coming out soiled as well. We checked both the Owner's Manual and the Service Manual and none of the troubleshooting suggestions appear to be relevant to our problem. The water here is very hard, and the water pressure is low and fluctua


You really need to replace the O ring . Could cause leaks and low wash pressure without it.You may also try running a solution of WHITE vinegar and water through the machine every six months as it helps desolve any lime scale (which is going to ... LG LDF8812 Stainless Steel Built-in Dishwasher

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

We have a built in GE dishwasher. It has worked fine for about 4 years but now the glasses in the top rack will not come clean. I have cleaned all the holes where the water comes out but I think the sprayer that is beneath the top rack (the one that is attached to the bottom of the top rack) is not rotating. We had someone out to take a look at it and they said it was fine. It isn't fine as it is not cleaning the dishes. Is there a reason that the bottom sprayer is not turning?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwasher

About a month ago, our dishwasher stopped working properly. It runs fine and the soap is being used, but the dishes are not being cleaned and especially on the top rack. I opened the dishwasher this morning while it was running and I noticed that the coil on the bottom was red (maybe heating water) but only about 1/16th of it. Could this be the problem?


Hi\015\012In a dishwasher you can see the water trickle upward to the upper nozzle in dishwasher...but if it does not have enough pressure,it will not function properly.tap the delivery tube that feeds this nozzle and you will see the water pre ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

LG model LDS5811WW/02 has never cleaned the dishes since first installation. Put clean dishes in and they will come out dirty too! Have tried all dishwasher soap types and brands and drying agents. Always scrape and rinse dishes prior to loading. Dishes loaded various ways but problem remains. Repairman says unit is working fine. Also never dries dishes completely. Often leaves soap dispenser completely or partially filled. We are on a farm and have hard water but we have a softener/iron remover


If the soap/detergent isn't completely rinsing out of dispenser, it sounds like water isn't directed the top spray-arm. possible a defective vario motor; as it directs water to the water channel that supplies water to the middle and upper spray arms. ... LG LDF8812 Stainless Steel Built-in Dishwasher

I have a Whirlpool dishwasher model number DU1055XTPQ4 that is not cleaning the dishes. When the dishwasher is working, the bottem arm is turning and water comes out the holes. The middle arm has some water coming out, but does not turn. The top arm does nothing. It appears I have a pressure problem. I took out all the arms and cleaned them, along with the plastic tube that feeds them water. They had some build up on them but not much. I have the same result as before. I took off the


... Whirlpool Dishwashers

Ge Triton dishwasher GSD5500GOOWW was not cleaning like it used to- I cleaned screens at back bottom-very dirty- also-detergent cup stuck opne - took door apart and got it unstuck - it works fine now. - it seemed to do better but now it is cleaning poorly. It seems to fill and start a lot sooner than before - after 30-45 seconds it starts up. I tested the water temp and it is 90 degrees! Hot water coming in is at 105 degrees. Also - it is leaving a white residue on dishes - didn't do that be


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

We recently purchased a Whirlpool ADP 4736 dishwasher, and just last night while it was working the fuse just blew, and we heard a popping sound at the back of the washer. We tried to replace the fuse, but the same problem. rnAlso, there a lot of water has collected at the bottom of the washer, although the dishes have been cleaned and dry. What could be the problem and the solution for this. All the instructions are in Polish and made in Poland. Please advise?? Many thanks Percy'


... Whirlpool 33 in. ADP6830 Free-Standing Dishwasher

My Whirlpool Gold Series 980 dishwater no longer fills up with enough water to drive the washing arms, so the dishes do not come out clean. I cleaned the filter on the water intake valve (which was really clogged) and it still did the same thing. Replaced the inlet valve and still no change. The water does not reach the level of the overfill float switch, so that’s not it. Its been working fine for 4-5 years, what else could it be? Thank you.


I hve provided u with all details .read it carefully .it has all the resolutions for all possibilities ... Whirlpool Dishwashers

Hi, I have a fisher and Paykel double dish drawer model DD605. A couple of days ago when we opened the top drawer all the lights flashed and beeped in sequence repeatedly and would only stop when the power was turned off or the dishdrawer closed. Today I went to turn the top dish drawer on and cannot change the cycle off rinse. I can push the eco button and the rinse cycle works no problem but I cannot change the cycle. The bottom drawer is running as I write this and appears to be fine. An


Hi\015\012\015\012\015\012Could you please let me know which all lights are blinking/lit solid in sequence from right to left. This could be an issue of drawer lock mechanism or flood switch issue. PLease post back with detai ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I am having the a problem with the bottom drawer on my Fisher & Paykel DD 603SS. Top drains just fine. I cleaned both the drain filter and the hose and it still won't drain. I had a service tech come out and he couldn't figure it out either...he thinks its the "computer" and the "sensor" and he wants me to order new ones - cost is like $210! I really don;t think it's the computer...the electronics seem to work fine...any ideas? Before this all started, a fork fell down and stopped the arm fro


The good thing is that you have a double drawer which means you have somethnng to continue cleaning dishes while you are fixing the other drawer and if necessary, you have a set of spares to try out as part of fault finding. That is the positive side ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dishes do not come clean. I have tried all cycles and to no avail. Soap dispenser sometimes drops but will see soap remains at bottom. Drying cycle appears to not work at all.


... KitchenAid KUDS30IXSS Builtin Dishwasher

Water & soap was coming out of the dishwaster. Replaced the seal around the door. Ran again on a pots & pan cycle to clean & it worked fine. Ran a normal cycle with dishes & soap & water came flowing out of the bottom now. Any ideas?


That sounds like the float switch is acting up. It is a mushroom looking device on the bottom that has a movable (up and down) plastic cup over the top. With the machine off, take the lower tray out and lift up on the cup--you should hear a faint 'cl ... Kenmore 24 in. 17032 Built-in Dishwasher

Have SHU43C and have had no problems with it. We usually run it on the Quick Wash cycle, but ran it on the Regular Wash cycle yesterday because the glasses seemed to be coming out spotty. After it ran, there were no lights on the display like there usually are. The washer had run and the dishes were clean, but it has not drained completely. There is still about an inch of water in the bottom, despite removing and checking both the Large Object Trap and Fine Filter (neither which were clogged


The drain pump needs to be replaced or cleared of obstruction. ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Neff built in dishwasher, model S44T09N3GB. When I set the program, it appears to be working on the screen but it does not take in any water. I have full water supply elsewhere in the house but it is below freezing outside - could it be a frozen pipe? Also, even before the water failed to enter the washer, it hasn't been cleaning dishes - they come out feeling chalky and aren't shiny.


... Dishwashers

I have the Fridgeadair Dishwasher FDB1502RGS model. It worked fine for several months but now it does not clean or rinse the dishes properly. It does not get hot any more. It used to be that when you open the door after washing is done it was hot and steam would come out. Now it is cold when you open the door. Please advise what the problem might be.


... Frigidaire FDB1502RGS Built-in Dishwasher

I have just bought a house with this dishwasher. The first couple weeks it was fine, now not all of the water will drain. Ive taken it all apart and cleaned it but after washing there is about 2cm of dirty water covering the bottom. It happens with both but usually only one at a time. I have read horrible things about the dish draw, what could the problem be? Help Please


The most common cause of problems on dishwashers installed by the builder are Installation issues. Usually, the drain hose is kinked and food particles accumulates on the hose until it clogs completely.If you are planning to fix it by yo ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Middle and top spinners do not spin The pump is pushing water up the back delivery tube. There are no dishes in the unit and I was able to trick the door into thinking it was closed so I could watch what was happening. Or Not Happening The spinners are completely free of calcium or soap build up and both top and middle are easily spun with a finger. While the pump and bottom spinner were working, I pulled the top drawer out partially and there appeared to be a good flow of water coming out of


Hi,\015\012 Remove each spray arm and check it is clear of food particlesat the jets. The next problem may occour at the rotating joint . If the seal is not good, you can loose a lot of water out of this point.. If both of these seem reasonable ... Dishwashers

I have a LG Dishwasher LD 14AW3 it fills and runs for about 30 min. It then appears that when it tries to rinse it cannot get water and flashes "1E". I disconnected the unit and when I moved it out of its position water was leaking from the bottom of the unit. after cleaning out the inside filter & the hard water filter I re-connected and found it worked. I ran a dishwasher cleaner through it at high temp. After a few loads the problem has come back. It is now located in MY garage waiting for me


Found a leaking component that was causing the foam float located and attached to the inlet valve to shut down the water inlet and the water inlet Solenoid was also sticking. I found out this simply by tapping it while it was trying to get water for ... LG Dishwashers

10 yr old Kenmore dishwasher was leaking, cycling ok but dishes are not coming out clean. Took about bottom spray unit, found a split plastic round ring about 1.5" dia. Could this be the problem or what else do I need to check?


The ring fits just under the spray arm and the split is normal. When you tore the spray assembly apart, did you clean the screens at the bottom (if white hard-water deposit, soak in 50:50 hot water and white vinegar)? Make sure none of the ports in t ... Kenmore Dishwashers

Frigidair model FDB520rHB2 Bought this brand new dishwasher and had it professionally installed. The unit seems to cycle fine, but after it's done, there is always a pile of detergent on the machine floor from where it dropped out of the dispenser. Plus the dishes are somewhat clean, but not all the way. I've tried all the trouble shooting that I could come across, but nothing seems to work. We have tried liquid, tablet and powder detergent with all the same results. Any ideas? Thanks


... Dishwashers

Hi. My problem is with my dishwasher detergent dispenser. It does open (at least it is open at completion of cleaning cycle), appears to deliver soap to dishes (as they appear clean), however, from the dispenser to the bottom of the door, there remains a very large amount of soap residue after wash is complete. This residue only continues to build up after each wash? The dispenser does not appear to be clogged and also appears to be delivering soap to dishes so I am not sure what to check for


\012Hi,\012\012There\012are three common problems that cause the Soap Dispenser or Cup not to\012open. I have a tip that will explain these problems in\012detail....Dishwasher Repair Problem ... Maytag MDBH985AWB / MDBH985AWS 24 in. Built-in Dishwasher

I have a Bosch SHU9955UC/14 dishwasher. I am having problems with the top rack not cleaning. The dishes on the bottom rack are cleaning just fine. I have taken the rotating spray arm off and cleaned it out and replaced it. I have also taken all of the filters out of the bottom of the unit and cleaned them. Any other suggestions for fixing this problem?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch SHU9955UC Built-in Dishwasher

My Maytag dishwasher model #MDB4650AWW bought in 2005 has developed several ongoing problems. The first is that the dishes get clean but there is always sandy dirty dried bits left on the glasses. The utensils are clean and the dishes in the bottom rack are clean but the glasses also have this "residue" left on them. I have tried different detergents and rinse agents. I have also added a rinse cycle as well. Nothing works. Now, I am seeing this sandy dirty debris dried bits in the bottom o


... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2164 seconds