Having problems with your Asko D1796FI Built-in Dishwasher ?

Door will not close to start unit

\015 Asko dishwasher model #1796FI, door latch will not catch metal latch on unit\015

Answers :

Thelatch on a dishwasher door is opened and closed repeatedly, and thishard use can lead to mechanical problems. The latch may be loose, or itmay have slipped out of position, throwing the alignment off andpreventing the door from closing properly. When this happens, the latchdoes not engage properly, and the dishwasher will not start.

Inmany cases, you may be able to solve the problem by adjusting theposition of the latch. Move the latch slightly by loosening the screwsthat hold it. Slide the latch with your fingers or pliers; the screwslots are made especially for this purpose. Close and open the door tosee whether the latch is properly aligned. Tighten the screws to holdit in the correct position.

Afterrepositioning the latch, check to see if it's working properly. Closeand latch the door and turn the control knob to the ON position. If thedishwasher doesn't start, the latch is faulty. Replace it with a newlatch, connecting it the same way the old one was connected. You mayhave to move the new latch back and forth several times before it worksproperly.

Here, check these links to see which door latch is compatible with your dishwasher if in case you need to replace it:

http://cgi.ebay.co.uk/-Iveco-3510-breaking-for-spares.-Side-door-latch-_W0QQitemZ260401436793QQcmdZViewItemQQimsxZ20090429?IMSfp=TL090429126001r15905

http://www.google.com.ph/firefox?client=firefox-a&rls=org.mozilla:en-US:official

Have a great day!
Repair Help & Product Troubleshooting for Asko D1796FI Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher model# FGHD2433KBI. washer was purchesed mid July, used 4 times. I just put in some dirty dish's and closed the door. A couple minutes later the washer turned on. No lights were on. After a few minutes I pushed the cancel button. Nothing happened. I opened the door and it sounded like a sucking sound and the pump stopped. No water in unit. I closed the door it started again. I cut the power at the circut box. Waited a few minutes and turned power back on. Power failure light came on.


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Bought a 3 year old unit for my son in law, picked it up at a storage unit. Unit panel will only turn on when the door is open. When we close the door the lights go off and it won't start. HELP


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Bosch Integra® 500 SHX46A0 Dishwasher

Ge model # gsc3200j01ww dishwasher. when the door latch is closed, nothing happens. motor does not start. if the timer is advanced to the next part of the cycle, water will spray into unit until float valve is triggered. water will not pump out, motor does not start. bailed out water, checked for stuck float valve-ok. removed drain screens and filters, cleaned. no motor, drain, or start. what parts should i check? always rinsed dishes before putting in washer. unit is portable or undercounter


... GE 25 in. GSC3200J Built-in Dishwasher

Bosch she4am Unit starts briefly, then stops about a minute into the operation and lights the CLEAN led. I located the diagnostics code paper, ran the test a few times, and come up with the same code...the CLEAN led lit indicates a door switch problem. I removed the door switch, it's a magnetic hall effect transistor..seems to work but not sure it's showing proper voltages. It reads 8vdc or so across the switch with door open, and about 11.7vdc with door closed. Seems too narrow a range to me


... Dishwashers

For my Kudi01dl model dishwasher, the rinse light is on, but the unit will not respond to any buttons being pressed and won't turn on. When I press any buttons, two horizontal lines show in the front, but go off as soon as I let go of the button. Is there a ways to reset the unit? Everything was functioning fine the last time I used it. I use it about once a day. The problem started when I heard sounds coming from the unit, very loud motor sounds. The door was closed but I had not turned


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

KUDU03STSS2 The dishwasher won't start and you cannot select a cycle. Hiting cancel twice will turn a small steady light on in the time window were the spining light normally is before a cycle starts, at which time closing the door will drain the dishwasher. Tried using the reset combos: hot wash, heat dry, hot wash, heat dry - all lights came on but nothing reset. Also tried same sequence doubling the heat dry. Unpluged for ten minutes, still nothing. Can select rinse, but unit does not start,


... KitchenAid Dishwashers

Unit won't start it just flashes CL (the door is closed)


REPLACE POWER CONTOL BOARD ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Noisy dishwasher my Kenmore quietguard 4 has developed an exceptionally loud hum/buzzing noise seemingly coming from the door of the dishwasher, when closed, locked and put on either drain or wash cycle.If the unit is allowed to sit for 1-2 days, the drain cycle will empty the tub without the buzzing noise starting. If anything else is attempted afterwards, like a wash cycle, the noise immediatley starts at a low level, then becomes steadily louder, until the full volume is reached, and does not


I have aloud buzzing nose and humming what is the problem ... Dishwashers

Smeg dishwasher L5 eco when dishwasher on button is pressed, unit does not start appears to be faulty switch underneath on light is on when door open, but goes off when door is closed


Brought a new dishwasher ... Smeg Dishwashers

Mod# mdb7601aww.... When I press cycle key, say heavy duty, then close door the 2H light flashes. I press the start button and the unit will not start. I have shut it down electricly and get the same results. what can be the problem? The front panel with the start/delay buttons or the inside control panel? I like to figure this on out the first time because each of those parts are $100+.


... Maytag Dishwashers

Non-starting unit The dishwasher will not start, reacting as if the door is not closed. The right side of the control panel (air dry, sani rinse, hi-temp scrub) allow selection i.e. the indicator light comes on. However, none of the cycle selection buttons on the left will engage.


... Kenmore 24 in. 16934 Built-in Dishwasher

Door will not close to start unit


Thelatch on a dishwasher door is opened and closed repeatedly, and thishard use can lead to mechanical problems. The latch may be loose, or itmay have slipped out of position, throwing the alignment off andpreventing the door from c ... Asko D1796FI Built-in Dishwasher

I have a Whirlpool Gold Quietwash Plus (part # 9744480), due to a number of opening and closings of the door, the lights on the front panel now just blink. How can I reset the control panel.. I have tried power scour>air dry>power scour>air dry and only end up with both blinking instead of going into control diagnostics by pushing pots&pans. The unit will attempt to start then just go to blinking lights.. Thanks


I would cut the power to it for awile 5mi and try it that may do it ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Unit is giving me a flashing CL and won't start cleaning cycle. The door is closed.


When you see the CL error and the door is indeed shut, pull gently back on the door. if you hear a click and the unit starts running again, it may be the gasket.Ours lost it's ability to keep the seal, allowing enough 'play' in the lockin ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have a Frigidaire Gallery Series dishwasher (model. GLD3450RDB0) that always displays the "lock" icon under the no heat dry button. I am able to get rid of it by holding the button for 3 seconds, but I am still unable to select anything or get the dishwasher to start afterwards. As soon as I close the door, the unit locks again! What can I do?


Have you tried unplugging the dishwasher for a while then .. Trying it again.. If the problem still persists have a cleaning done to the control board and touch pad inside and if still the problem persists then i doubt whether the problem is that the ... Dishwashers

My Bosch SHE98M will not respond to pushing the Cleartouch buttons. It is just stuck displaying the normal wash. It will not respond to pressing any of the touchpads. When the door is closed it displays "not started". I have powered the unit down by switching it off at the supply, then restoring power but there is no change. It appears as if the cleartouch panel is no longer sensitive to touch?


... Bosch Evolution 800 SHE98M05UC Stainless Steel Dishwasher

Kitchen aid dishwasher model#KUDSO1FLSSO CLEAN LIGHT BLINKS7 TIMES- I DID THE RESET SANIRINSE-ENERGY SAVER-DRY ETC... CLOSED DOOR NOTHING. WE DID HAVE TO REPLACE THE ELECTRONIC CONTROL ASSEMBLY (PART# 8564542 ) BY THE " CONZ"AREA IT WAS BURNED AT THE TOP BY THE "T" AREA. NOT SURE IF THAT HELPS MY HUSBAND IS OUT WITH FRIENDS TONIGHT HE GAVE UP WE HAVE UNPLUNGED THE UNIT AND MY HUSBAND SAID HE EVEN DID OUR BREAKER- HE CAN FIX ANYTHING BUT THIS IS REALLY STARTING TO p... HIM OFF AND WANTS


... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Kitchen circut was accidently turned off. Now whirlpool gold disher will not work(unit was not running and the door was not closed all the way when circuit was turned off, All circuit breakers are on) There are no lights on display when door is closed completely, and it appears to have no power. Worked fine prior, what could it be? The unit has not been removed from under the counter yet. Is there a fuse or circuit breaker on the unit? If so where is it located? Other troubleshooting ideas


Hello- Turn power off. Remove kick panel and cover for power wires. Check connections. If these are ok, most likely suspect is a fuse at the control. This is a little harder to get to. Remove inside door panel screws. Unplug wires and remove panel. F ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Myy kitchenaid dishwasher model kudi01flss doesn't start even though the lights on the panel light up so I opened up the door to look at the latch and found a broken plastic piece that appears to be part of the latch. Could this be why the machine doesn't start. The funny this is the door still seems to snap closed even with this broken piece but what I'm thinking is that this piece activates some sort of electrical connection that turns the machine on when the door is closed. Any thoughts on th


... KitchenAid KUDC25CH Dishwasher

Bosch Logixx won't start - Stuck on "Close the door" even though door is closed.


Open the door, look along the top stainless on the door and you should find the ENr number (model number) etched into the stainless, may need to give it a wipe and look at an angle to read it. Post the ENr and that should help with diagnosis. ... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

Our Kitchenaid dishwasher model # KUDP021R will not start. We close door, select wash and press start. The control lock light at the top which is lit flashes a few times and then stays lit. Dishwasher remains silent. An aside which may be helpful is that the door has always seemed to be not quite straight...as though it had to warp a tiny bit to close and lock.


The problem you have already identified could be the door switch is not closing when you shut the door. Please confirm your dishwasher is KUDP02I (i and not 1).\015\012\015\012One way to check is find out the door switch on the door panel ... KitchenAid Dishwashers

I have a Electrolux dishwasher EID6305. Everytime I close the door it wants to start a cycle even though j haven't pressed anything. Pushing start/cancel button doesn't cancel it. What's the best way to open the door an close it without starting a cycle?


... Dishwashers

I have a Bosch SHX43M05UC Dishwasher. To wash, you select the cycle and then close the door to start the wash. Now when I push the on button, the pump turns on. I can't tell if it's pumping water or not but it's not supposed to start until the door is closed.


... Bosch SHX43M05UC Built-in Dishwasher

Why does drain motor start when pushing the start button on the door before the door is closed?


It's almost certainly the float switch in the bottom of the machine. In the bottom is a polystyrene 'float' that is either active due to water in the bottom or is faulty. Tip your machine to the side and remove water and try again, bridge or replace ... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0790 seconds