Having problems with your Audiovox Dishwashers ?
Bosch ptl 1 turning heating off badly
\015 As the machine is running it constantly turns the heating off, this occurs more the fuller the machine is. When heating up for first use it will turn off perhaps 10 times befere it even reaches bioling point\015
Repair Help & Product Troubleshooting for Audiovox Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Bosch ptl 1 turning heating off badly
... Audiovox Dishwashers
Bosch dishwasher shx46b02uc has stopped drying. Per online comments, they seem to point to either a corroded wire or a bad heating element. We've replaced the heating element and all the wires looks fine. All other functions work - just not the heat. Open to suggestions.
Hello,Welcome to FixYa.Based on your description ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
Hi sorry about the bad video! I have a work pool quiet partner 2 that turns on but won't run threw a cycle ? All that turns on is the lights normal and heat dry can some one help ?
See this causes and fix it. God bless youPower Supply\012\012\012\012The main power supply is the first thing to check. Also remove the toe \012kick and the cover on the power box and check the connections. Also check for 120 at th ... Dishwashers
I have a Bosch she44c dishwasher that I used just this morning. This afternoon I went to turn it on and a fuse in the panel box tripped. Is there something in the dishwasher that could go bad that quickly or is it most likely something else? Every time I reset the fuse and turned on the dishwasher, it tripped again. Leaving the dishwasher off, it doesn't trip.
Hi,\015\012\015\012In some cases, the heat element lining wears out and the element shorts out to the chasis of the dishwahser, thus tripping your fuse.\015\012\015\012In other cases, the dishwaser leaks water, and shorts out ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher
Bosch dishwasher classixx leaked quite badly then worked a couple more times now has stopped working. The dial does not turn just makes funny clicking sound and the salt light is flickering!!!! What is going on??
Soap I also have a problem with the soap not completely emptying out when I run the dishes. I don't have a problem with the cleanliness of the cycle but my dishes have presoaked in my sink which is a very bad habit. But I would like to have a timetable for the different cycles. I don't understand why the machine has to run an hour when the heat is turned off.
Your soap is old. Get some fresh stuff, or use a liquid dw soap ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
I have a Bosch SHU53513UC/U12 dishwasher. My initial problem is that the washer smells bad after a cycle and I've noticed some water sitting in the bottom of the unit. After running a diagnostic test, it results in a "2" heating fault. I followed your advice and used a current coil to and attached it to the GYBK-a1-3 hot wire on the control board. After running the test again, it only gets as high as 1.15A and manual says it should reach 11A. What should I do next?
Hello,Welcome to FixYa. ... Dishwashers
Bosch dishwasher SHU3032UC/U12: Gets stuck mid cycle. Timer does not move, but will continue if turned manually. Will stick again. Thought it might be the timer (control unit), but now am wondering if it could be the heating element or thermostat.
Hello, Welcome to FixYa. Based on you description of the timer not advancing you`re on the right track when you said "Thought it might be the timer (control unit), but now am wondering if it could be t ... Dishwashers
How do I replace the heating element for a Bosch SHU53 dishwasher
Are you sure its the element, the control boards on them get bad soldering joints and the you get the impression that the element is bad, but its the solder joint that controls the element that goes bad....you can resolder that ... Bosch 24 in. SHU53 Built-in Dishwasher
Bosch Exxcel (SGS47E02, I think) no longer heating water
You will have to check the the temp sensor. if the temp sensor is ok.then the control panel needs to be checked.If the control panel does not see a temp sensor, it never turns he heater on. There is a thermostat on top of the water heater. ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher
Installing new heating element in Bosch dishwasher
In order to replace te heater in that unit, it must be remove from cabinet, and taken apart, it is very labor intensive, in order to access the heater, youll need to remove eh lower plastic pan from D/W. in order to get that removed, ... Bosch 24 in. SHU53 Built-in Dishwasher
Maytag MDBH970AWS Heating element won't turn off. Dishwasher heating element won't turn off. Have to shut off the breaker to make it cool down. Heating element gets hot as soon as you flip the breaker back on
The heater relay is located on the control board, a faulty relay or a faulty control board would cause the problem you have described. The fix is to replace the control board. Parts for your unit should be available from most appliance parts retail ... Maytag 24 in. MDBH970AWS Built-in Dishwasher
Bosch dishwasher I have a month old Bosch dishwasher. It was stopped mid cycle. I drained the water at the bottom, but the active light keeps flashing, and when I press the start,reset button, then turn it off, it does the same thing when I turn it back on. active light keeps flashing and the wash light is on. It won't even lock the door. How do I fix this because there is no Bosch dealers here to help with the problem.
... Hotpoint 23 in. BF41 Built-in Dishwasher
My Omega Eurolux Dishwasher (mode: DW211P/1) won't stop cycling, It sems to get stuck during the wash cycle and continues for hours, until I turn it off. If I turn the dial to rinse it rinses fine. It doesn't seem to heat the water at all, there is no steam when I open the door. I have put a new heating element in, but this doesn't seem to be heating up at all. When I open the door mid wash cycle the element is cold to touch.
Hobart AM14/1 free standing dishwasher with booster. Booster will not heat up beyond 41C. All three heating elements check ok with Ohm meter. High limit not tripped. Temperature screw up at maximum, when you turn the screw, you can hear thermostat click at lower temperature on and off. When turning on main power for dishwasher, heater in dishwasher works fine, but no relays click in the booster tank area. Have not checked for power at booster, have checked all fuses with meter and are ok. Ple
... Hobart AM14-253 Free-standing Dishwasher
Bosch Dishwasher I currently own a Bosch dishwasher. One of the selling points, if I'm remembering right, of the dishwasher was it was supposed to super heat the hot water that is coming in from the tap. I have 3 problems. We have to rinse the dishes by hand before putting them in the dishwasher, Otherwise they won't come out clean. The dishwasher will run for four hours sometimes longer. It doesn't seem like it is heating the water any hotter than what comes out of the tap.
Your control board is bad. ... Bosch 24 in. SHU43 Built-in Dishwasher
Fills with water, sounds like it starts to pump water then stops, then start again. It attempts to start pumping water 3 or 4 times them turns off leaving the water in the tub. I have read about the water needing to heat up for the cycle to advance. When I check the water that is left in the tub it is warm but not hot. The heating element is not hot either. I did a continuity test on the heating element and it seems to check out ok. I also did a continuity test on the red wire from the heating e
You have a wash pump problem. can be 1 of 3 things. most likely something is caught in the pump impelor if not the wash pump motor may be faulty or ceized or it could be the capacitor for the wash pump motor is faulty. you can try removing the wash p ... Maytag MDB7100AWB Dishwasher
Whirlpool quiet partner reset ( heated dry, normal , heated dry Normal) nor is (heated dry, high temp wash, heated dry, high temp wash) neither combination is staying on. I have to turn the breaker off & on each time to do combination. What can I do?
Bosch SHX46A (6 years old) Selected regular cycle, pressed On and closed door. Cycle did not start normally. Pump runs, but no water is coming into the DW. I confirmed the water supply line is turned on. I opened door, turned off On/Off switch, then poured water into drain. Then turned On/Off switch on. DW began pumping water OUT of the DW. Also, it doesn't matter if the door is open or closed - if you turn the DW on, the pump will run. I suspect a problem with the electrical controls, or perha
From your description, I doubt that the problem is door latch is the cause.\015\012\015\012The first thing that a modern dishwasher does before it begins to fill with water is run the drain pump. It appears that this DW is not progressing ... Bosch Integra® 500 SHX46A0 Dishwasher
Aeg bs45e water heater, heats water for 5 mins and then 'trip' light comes on and pressing reset button does nothing, heater must be turned off for 5 to 10 minutes b4 it will heat water again
Bosch SHE4AM16UC/05 dishwasher will not operate, lights for "Clean" and "Autowash" remain on. Can turn on and off, but that's it. Tried reset, turning it on and off from the breaker, checking dr
... Bosch Ascenta SHE4AM16UC Full Console Dishwasher - Black
I have a Miele G 892 SCU PLUS Dishwasher. I have clean the filters, check the pump and could turn the impeller both ways. I turn on the dishwasher and it will pump out any water and fill then heat the
... Miele Dishwashers
Bosch she6ap05 dishwasher not heating
If the unit is not heating, it may give an error message (usually e09) the chances are that it is the heat pump (part number 669135). The circulating motor and heater are combined in this one unit. It is also possible that the power board (sit ... Bosch Dishwashers
I have a GE Monagram dishwasher 1999 /- model ZBD 5900/5700 It is stuck on Heated Dry cycle. Would not drain for along time, than it finally drained but still stuck on Heated Dry. Turned breaker off and on several times did not help. Still stuck on Heated Dry no other buttons work
Bosch dish washers Bosch Logixx Dishwasher . BOSCH SGS0922gb /06 the screen on the machine seems to show not started i can get the info to change if i partly turn off the power switch then it shows the main options , any reset procedure i should follow to put machine in a full reset ?