Having problems with your Baumatic 23 in. BDW14 Built-in Dishwasher ?

Baumatic bdw14 bottom spray bar wont spin it is clean and free

\015 Top bar is fine, it appears no water is being pumped to the lower spray bar\015

Answers :

Repair Help & Product Troubleshooting for Baumatic 23 in. BDW14 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Baumatic bdw14 bottom spray bar wont spin it is clean and free


... Baumatic 23 in. BDW14 Built-in Dishwasher

Bosch Exxcel Diswasher SGS43E08GB/43. Top spray bar won't spin. All arms, spray holes, ducts, filters, etc are clean and free from obstructions. Water comes out of the holes on the top bar but it won't spin. Water pressure inside the machine with all the bars and ducts removed seems good. Bottom bar works fine. Any ideas please?


Try starting the washer, then opening to door and checking the water level in the bottom of the machine, as far as I know, there should be enough water there to disolve the tablet when it sits in the bottom. if not that much, bung in a few cupfulls a ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

The top cleaning bar will not spin---water is moving through it but it wont spin--the bottom cleaner spins fine---took it apart and there is not blockage in either of the cleaning bars


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Whirlpool DU1055XTSQ Built-in Dishwasher

Bosch Integra SHU 9955US/12 - when we start wash cycle, the detergent dispenses and the tub fills with water, but the wash cycle never starts (never spins spray bars). Seems like timer is counting down, though, but doesn't start "washing". After waiting awhile, we are able to use the "Cancel/Drain" mode to drain the water. The drain filter in the bottom of the tub is clean.


Sounds like your motor is burned out. The drain motor and wash motor are seperate on your machine. You can check for power going to the motor, but to do this you might have to pull the dishwasher out. While the cycle is running check for 120 VAC g ... Bosch SHU9955UC Built-in Dishwasher

My dishwasher has stopped cleaning plates properly. It makes everything wet but at the end of the cycle the detergent block is half dissolved at the bottom. I have just run a cycle and opened the door during this. The bottom is full of soap suds and water and the top spray bar is dripping water after I open the door but when I close and then reopen a few secs later the top spray bar has definetly not rotated. The water is also not hot, this dishwasher is a cold fed only machine so I guess the el


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Zanussi 18 in. ZSF4123 Slim-Line Free-standing Dishwasher

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Hi Model DU1048XTPQ4...when I started the DW today, it sounded kind of loud. I let it continue, then I smelled something burning. What I think happened is that the lower spray arm is too loose-so when it spins, it gets stuck on the heat ring on the bottom of the DW and then the plastic parts start to melt. We disassembled the spray arm and there was lots of calcium/lime build-up. So we cleaned all of that out, put it all back together, but the spray still seems too wobbly. Went ahead and start


The noise coming is from the motor bearings or the impeller which moves with the motor.both has to be checked.\015\012if the bearings are making noise motor needs replacement and if impeller is cracked it needs replacement.\015\012you can get require ... Dishwashers

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

- the dishes and glassware on the top rack are not coming out clean - I checked the course strainer to see if it is being blocked but don't see any thing there - I also took out the spray arm that sprays up into the top rack and ran water through it with a hose - it also appears to be free of clogs. - I don't see the spray arm spinning when I open the door during the wash cycle - - lastly, it may be unrelated, but the dishes are not coming out of the washer as hot as they used to be any i


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

I have a maytag jetclean quiet pack dishwasher. The top dishes are not getting clean. The glasses always have sandy residue in them and sometimes orange juice etc at the bottom of the glass isn't removed. I have added jet dry, this doesnt work. I ran the rinse cycle today and opened it up during the cycle and I didn't see the middle pop up spin thing in the middle of the bottom shelf doing anything. It should be spraying during the rinse cycle correct? Thanks for your help


Possible that the pump is not working well to spray and inject with good pressure so that the dishes are spot clean.\012You will need to simulate the washer without any dish and checck the performance to understand the fault areas.\012The ... Maytag Dishwashers

Top sprayer wont spin . dishwasher goes through cycles and only partially cleans. bottom sprayer does spin.


The sprayers are not powered but rely on the water pressure to spin them. If it's not spinning it could be \015\012the spinner isn't engaging in the top rack as you slide it in\015\012blocked jets on the spray arm\015\012blocked fee ... Maytag Dishwashers

Model PDW8200J10WW Upper spary arm not spinning, dishes in the top tray do not get clean, usually have 'grit' on them. Took spray arm out and verified no blockage in the arm itself but can find instructions to remove the bottom spray arm and pump cover to check for items in the pump intake. Any thoughts??? Thanks...


... GE Dishwashers

Brand new ge GDF540HSD0SS dishwasher just installed this week has a middle arm that is not spinning. This is the one that is attached to the bottom of the top rack, and sprays water up. Water is coming out fine but no spinning. As a result, the inside of dishes on top rack are not getting clean.


... GE Dishwashers

The bottom spray arm on our LG dishwasher, Model LD-14AW3, will not spin. The diverter valve from top to bottom section does not operate, i cleaned it and the housing near the filter but still no go. any ideas? cheers, Dave


I have the same problem, well - similar. The diverter is moving for me, however it is moving to the wrong position. It seems to move between the upper arm and then blocking off, rather than upper arm and then lower arm.Did you manage to find a ... LG Dishwashers

My dishwasher runs but does not have enough pressure to clean the dishes or turn the spray arms. Arms spin freely. I have removed and cleaned the screens in the bottom of the dishwasher. I also have removed the large pump and checked it for damage..no problems found. Model SHU43CO5UC / 17


Hi.Below a list of things to check.Check the water inlet at the back, ensure that the hose is not clogged or kinked, and that there is sufficient pressure.Ensure that the machine is not underfilling. Test the water ... Bosch 24 in. SHU43 Built-in Dishwasher

Bosh dishwasher, model shu 9955uc/14. wont clean dishes, top arm does not spin. bottom arm spins some. thanks


... Bosch Dishwashers

NEFF S4443 top spray bar not rotating, no water. Bottom spray bar rotates and sprays water. Checked and replaced fine/course mesh filters. Will pump to empty and refill on pre-wash (rinse). Seems the pump may have two outlets one feeding the bottom spay bar (nearest from of machine) and one just behind which feeds the upper spray bar. Running without spar bars attached (including mechanism feeding to bar, water is only being forced out of the from outlet. Any ideas before I start taking it apart


... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Dishes have film and not clean there is hot water and the rotating bar ob the bottom appears to have way=ter shooting through but I do not think it is spinning.


The problem is hard water. go to www.dishwasherfilter.com. they have a new product out that finally solves this problem. very affordable and guaranteed to work. you will lo ... Dishwashers

I need to replace the pump assembly on my diswasher, how do I get the bottom spray bar off. The plastic bolt on the arm just spins model # KUDS011JWH1


... KitchenAid Dishwashers

Bottom spray bar not spinning - Kenmore 16872 Built-in Dishwasher


... Kenmore 16872 Built-in Dishwasher

Kitchenaid dishwasher spray arm does not spin on the top and slow on bottom. I cleaned everything out and I did not see any thing.


... KitchenAid Dishwashers

The water is not getting up to the middle spin bar or the top one, so nothing on the top rack is getting cleaned and everything is left with soapy film, so it is not rinsing properly. There is water coming in at the side for the intial fill and from the bottom to wash.


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

The dishes are not getting clean and the top spray bar is not spinning


Hi,This is most commonly due to debris in the inlet of the pump. This will cause poor water flow to the upper arm and low pressure to the bottom rack. If you want to clean this out I have put together some instructions. Follow the link be ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Water does not spray up to the top rack - dishes not getting clean. Lots of water pressure; lots of water in bottom; motor spinning; no apparent damage to pump impellers. Any ideas? Maytag MDC4100 freestanding. Thanks.


... Maytag 24 in. MDC4100A Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1671 seconds