Having problems with your Baumatic 24 in. BFD60SS Free-standing Dishwasher ?

Dishwasher baumatic bkd65ss beeps displays ERR 4 which means overload protection, how do i resolve problem


Answers :

Kick it it works 4 me
Repair Help & Product Troubleshooting for Baumatic 24 in. BFD60SS Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher baumatic bkd65ss beeps displays ERR 4 which means overload protection, how do i resolve problem


Kick it it works 4 me ... Baumatic 24 in. BFD60SS Free-standing Dishwasher

Baumatic (BKD62SS or BKD62W .3) Dishwasher will not do a normal load but will run in a strange start up mode I found. When I press the power button, select a cycle, then press start the dishwasher will no longer do anything. 5 seconds after pressing start it will make a light hum noise, a little like heating water. After about a minute the dishwasher won't have done anything. It will then beep 30 times with the third led on the set of four (don't know what it means) will flash a lot. The beeps t


... Dishwashers

We are having a problem with our LG Dishwasher. The machine is washing for about half an hour and then will stop and report an E1 error. According to the user manual this means "Water leakage in Hose connection" or "Water is leaked by damages". We have checked the diswasher's water connections and can't see any water leaking out. We have also cleaned the filers and checked the spray arms but that has not made any diffrence. Any suggestions what this error means and what we can try to resolve it


... Whirlpool 24 in. DU940QWD Built-in Dishwasher

I HAVE A BAUMATIC D/WASHER BHD5 TYPE DW-24E1,(ABOUT 8 YEARS OLD) IT IS A WHILE SINCE LAST USED THEN 1 NIGHT AS IF IT HAD STARTED BY IT'SELF IT STARTED MAKING A BEEPING NOISE ALL 4 INDICATING LIGHTS AS WELL AS SALT AND RINSE AID WERE FLASHING HAVE SINCE TOPPED UP SALT AND RINSE AID BUT ROUGHLY 1 MINUTE AFTER STARTING IT BEGINS TO BEEP AND ALL LIGHTS FLASH. COULD YOU TELL ME THE PROBLEM. MANY THANKS


... Baumatic Dishwashers

There was some ordinary dishwashing liquid leftover on plates when i placed into dishwaher and this caused foam. The machine had a spanner appear on display and blinking light with a beeping noise. whenever I turn the machine off from the power button, it would after a 1 minute turn itself on again. with the blinking light, beeping noise and spanner picture on display. 1. how do i turn off completely 2. what does spanner mean and how do i resolve.


Hello &\015\012Welcome to FixYa\015\012\015\012Spanner\015\012indicates that there is excessive water in the unit, and instead of leaving it\015\012open you can take off the bottom front panel of the unit and clean the ... Dishwashers

I have an err 205 on my meiko fv-40 dishwasher and the manual has only up to 202 what can be my problem or what does this 205 error means?


... Meiko FV 40.2 Dishwasher

My ADP6000IX dishwasher has stopped working. Put it on a cycle and it has started beeping and coming up with an error message err 4. Have cleaned out filter and wiped inside. Don't have the manual to check what this means. Can you help?


... Dishwashers

Replaced the control panel on my indesit idl 700 because it was cracked, but still working. since then will not fill with water , water is on switches all seem ok but will not fill. three beeps can be heard , which means its asking for water, what is the problem ?


... Indesit 24 in. IDL700 Built-In Dishwasher

Parmco dishwasher E4 fault, beeps at end of cycle, litre counter problem, what does this mean,how to fix, Grant


Go to www.searshomeservices.com they can fix it ... Baumatic 18 in. BHD45 Slim-Line Built-in Dishwasher

The start/pause button beeps when pressed to start a program and the machine gives a beep in response and appears to start its initial sump emptying phase but stops within 1-2 secs. Have checked pump and found no problem but start time is so short that in cannot have sensed a problem in the pumping circuit. If I persist in holding the start/pause button in, it can be released after the initial sump emptying phase (2-3 mins) and phase 1 of the wash program goes to completion. At the end of the


Hi\015\012\015\012Ronald...the beep sound itself indicates an issue with the\015\012membrane switch (control panel) and it should be replaced. I believe that the\015\012pump and motor is fine as its just beeping and doing nothing else. Ho ... Smeg 24 in. DWI612 Built-in Dishwasher

Intermitttent beeping on bottom drawer of dish washer no error code only cycle to work all the way through is rinse cycle. Have turned off power supply over night did not fix problem. When you press pause button restarts for about five minutes then beeps again. No problem with top drawer. All inside cleaned using correct powder and rinse aid.


Panel control board Call Encompass Parts 1-800-638-3328 ... Fisher Dishwashers

I have Whirlpool dishwasher DWH B00. Now it starts as normal filling water for a couple of minutes. Then it suddenly starts beeping and pumps out all the water and just contiunes to beep. This will happen in all programs. We have studied the users manual and cleansed the filters as suggested in the manual, but this doesn't help. There are now problems with the water supply. The dishwasher is not used very much, may be just twenty times. In the start it worked normally, this problem suddenly


Hello & Welcome to FixYa If the sound is coming from the bottom panel then it is the motor that has gone bad and needs replacement. However, if you hear the sound from the control then it can be due t ... Dishwashers

We have a Miele dishwasher. We've had a technician come because the water is not hot enough; the dishes are not dried when we empty it as a matter of fact glasses are stained and wet. After he left, the problems remained. :( We now have an additional problem. We have mildew in our dishwasher!!!!! WE wash dishes daily. WHY do we have these problems? Can we get a technician to resolve these problems permanently? Should we buy another brand?


I may be just repeating what the technician has done, please bear with me. Check first if the heating element inside the dishwasher is heating up to the temperature it is supposed to. You can do a manual inspection just to figure out. It may be a ... Miele Dishwashers

Hi, I have a problem with my Electrolux ESF66811X dishwasher. It stops after 15-30 minutes and the progress indicators all start flashing blue and there is also a beeping sound (6 beeps-pause-6 beeps etc). The display indicates code i60. What could be wrong?


... Dishwashers

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

I have some problems with my Candy dishwasher CSF 4575 EX. The pre-wash light and drying ligh brighten together and also have beep sound. I traied to solve this problem with pressing the Start/Reset button more than tree seconds but still the dishwasher won't restart or change the problem. What you suggest to do ? Thanks a lot !


... Dishwashers

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

During circulation, top drawer seems to leak water through the rubber seal, located on the lid assembly. What would commonly cause this problem. Would it be the actuator, yoke, seal, etc... Please answer only if you've seen enough of this problem, with this model, in particular. Will provide monetary full rating if you can provide both, what part and why... and of course, if it resolves the problem :)


... Fisher and Paykel DD605I Dishwasher

During circulation, top drawer seems to leak water through the rubber seal, located on the lid assembly. What would commonly cause this problem. Would it be the actuator, yoke, seal, etc... Please answer only if you've seen enough of this problem, with this model, in particular. Will provide monetary full rating if you can provide both, what part and why... and of course, if it resolves the problem :)


Lid seal not sitting properly can be due to several reasons as you have eluded to.\015\012\015\012The simplest is that the actuator is not getting any power. But if you hear the actuator operate at Start then this is not a problem. Howeve ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Lights flashing and beeping on drain stage


When this has happened to us, it has meant a new control panel being fitted. It has been nothing to do with the draining process, just the electronics. The control panel isn't too expensive, but if you call a Baumatic engineer he will come out, do no ... Baumatic 23 in. BDW5 Built-in Dishwasher

Ariston AS 150 will not start cycle, and warning beep (as if cycle completed) sounding constantly. checked all possible problems, machine will just not begin new cycle at all, and warning ''beep'' constant if i leave dishwasher switched on.


... Ariston Technologies Dishwashers

I have a fisher & Pakel dishwasher and it appears to have brown a fuse inside the machine which means it does not work at all and the problem occurred during the wash cycle. This means the seal (which is a top piece that's lifted and lowered by two motors. When the seal is in the lowered position it creates a complete seal but it also locks the drawer (single drawer dishwasher) so it cannot be pulled out. I repaired the dishwasher two years ago. One of the lifter motors didn't work. I replaced t


According to the service manual there is no problem in manually forcing open the drawer in the situation where the power has failed part way through the diswasher cycle.\015\012\015\012The problem is that once you force the lid open, you ... Fisher and Paykel Dishwashers

Baumatic BFD45W got part way through a cycle and the just stared beeping with the lights flashing, now even when it gets unplugged, when turned on it just beeps with the lights flashing. any ideas?


... Baumatic 24 in. BFD60SS Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1145 seconds