Having problems with your Baumatic 24 in. BFD62 Free-standing Dishwasher ?
I have washed on standard and economy cycle and both times it has taken at least 5 hours??
Repair Help & Product Troubleshooting for Baumatic 24 in. BFD62 Free-standing Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have washed on standard and economy cycle and both times it has taken at least 5 hours??
... Baumatic 24 in. BFD62 Free-standing Dishwasher
Cycle time Just moved in, started the Bosch dishwashe that appears to be less than two years old, left for one-hour and came back to find the wash cycle still going; hasn't cycled in thirty minutes since I've returned. Is this normal? What is the standard cycle time?
Yes its normal.bosch dishwashers use very little water and energy but,the cycles need to be longer to get the dishes clean. its perfectly OK.(ps use cascade powder if you can) ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher
My dishwasher skips the final drain cycle. The lines are all clean and there is no clog. It drains just fine in the beginning of the wash cycle. Every time I do a load of dishes I have to run the full cycle, then leave the machine open for 3-4 hours and start the cycle again and listen for the drain at the beginning of the wash to drain the machine from the initial wash and stop the machine after it is done draining so it won't fill up again. Sometimes we have to unplug it and wait about an hour
... GE Nautilus 24" Built-in Dishwasher
Our Miele Incognito dishwasher was installed in our new home in August, 2005. The wash/dry cycle has always taken a very long time - 5-6 hours is now the standard. So we have gotten accustomed to only running the dishwasher at over night. However, for the last few months, we've noticed the dishwasher is no longer drying well - we also need to finish drying the plates, glasses and silverware. Do you recommend we have a service call?
Yes, absolutely. The timer motor is not functioning right for it to stay on like that. Could be other control issues too. ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher
New dishwasher (Beko 2542F slimline model). Put it on for 1st time last night -when I got up this morning, the cycle which should have taken just over 2 hours hadn't finished. There's soapy water in the bottom of the machine which hasn't drained and the "wash" light is still on. Looks like the dishes are clean but hasn't moved onto the rinse/dry part. Followed instruction in manual to drain it (hold start stop button till lights flash and should drain in 45 sec) but nothing happened.
... Beko Dishwashers
I have a Sears Kenmore Elite Ultra dishwasher 665.1315 model. For the last 3 weeks, it keeps having the clean light blinking 6 times pause then 1 blink and pause and repeats cycle again. I have turned off the breaker...I have reset by pressing the heated dry and normal wash until all lights are flashing. It then completes some type of cycle and looks ok. When I opened the door, steam came out and all was hot inside. However, once I try any new wash cycle, it seems to wash but after 1-2 hours and
Call sears service and tell them you need service there is a service flash and will be no charge ... Kenmore 24 in. 15932 Built-in Dishwasher
8 years ago we bought a model 665 Kenmore Limited edition Stock #575-0 if you need that. A certified kenmore tech. has been out here 3 times with still no clear answer. The problem is when you run a standard cycle of 95 minutes it counts down to 78 minutes and stays at that time for about 45 minutes then stars counting down again till 42 minutes then stops at that time for about another 45 minutes then coutinues till it finishes the wash and drying cycle. It runs and sounds fine the entire time
Sounds like timer prob.would rec. replacing timer ... Dishwashers
Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to empty and run a few RINSE ONLY cycles (which are consistent, cycle time wise) to rinse the soap off of the dishes. Also, the door for the soap seems to stick - how long into the cycle before the soap door should open? Also, does opening the washer during it's cycle (to add more dishes) change or
I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. P ... Frigidaire 24 in. FDBB540 Built-in Dishwasher
Wash cycle it takes 2 hours to complete cycle. dishes are very cleal, but it seems 2 hours is a long time.
Momrules, it could vary depending on the water entering the dishwasher. On a heavy cycle normal time is about 85 minutes not including thermal holds ( pauses that heat the water). On a normal wash, 68 to 75 minutes not including thermal holds. If t ... Kenmore 24 in. 17512 Built-in Dishwasher
Dishwasher DU1100. Odd behaviour during cycle: "Washing" light goes off and sound of washing stops. "Normal" light starts blinking and "soak and scour" light comes on (it was off before). No sound from washer. This persists for at least 10 hours. After that, the lights go off. Is this normal behaviour? It would appear tha the drying cycle did not go.
No it is not normal. It appears that either the membrane switch pad has failed or the control board has failed. ... Whirlpool Dishwashers
My Bosch SHU 5315 always runs for 2 hours or longer for its washing cycles--read manual-- does not indicate how to change wash cycle to less time
"The repairman said these washers seldom have mechanical failures and the main board failure is the most common failure."Taken from this ... Bosch Dishwashers
I have a Smeg DWD1SSE dishwasher, that has decided to start and stop on it's own during the wash cycle. We have to restart it at least three times during the 30 min short wash, and it very rarely gets to finish a whole cycle. I have stripped it down to make sure that there is no moisture on the main PCB behind the buttons, which there isn't. I think it looks as though the control board is faulty. If anyone can help or back my thoughts up, I would be very great full. Thanks.
... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher
I have a couple of problems. Firstly, the auto programme now shows a cycle time of 199mins but actually takes much longer than that to complete - more like 4 hours. On the quick (!) wash cycle the time is 97 minutes, whereas it should be less than 30 mins. Second problem, the detergent box flap won't stay shut when loading, so I have to put the tablet in loose in the bottom. Could the 2 problems be related?
There is an issue with the machine not heating properly, it could be the control panel or the thermostat, The flap not staying shut is not connected to this. ... Dishwashers
I have model #FGBD243KF1, Gallery 24" stainless. The wash cycle is taking almost 2 hours. Should it take this long? Also, when switching cycles during the wash time the motor whines a bit. Is this also something to live with or should I get it checked out? Thanks.
These units are pre programmed they can wash that longer and sometimes up to two hours and fourty five minutes. there are alot of factors involved.your unit sounds like it is running normally. at this time ... Frigidaire Dishwashers
When dishwasher is set to begin, sensor takes very long period of time. Cycles are longer than minutes indicated. Dishwasher fills with water but does not wash. Water then drains as though cycle is complete and moves to next cycle. Then the process continues. When cycle for drying is reached, much heat is given and occasionally it smells as though there is burning. A 82 minute procedure turns into hours.
... Kenmore 24 in. 16532 - Multiple Color Built-in Dishwasher
Our Miele G975SC dishwasher has developed a problem - it starts a wash or rinse cycle as normal - it pumps out, then fills with new water and starts washing as expected. Then it just carries on circulating the water and heating the water. It ran like this for at least 2 hours before we interrupted it by switching it off
... Miele Dishwashers
I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.
... Bosch 24 in. SHU43 Built-in Dishwasher
Thick film left on alot but not all dishes. Especially dark colors. All of my black utencils are now filmy gray and won't wash off with hand wash/scrubbing. Rinse aid is full, tried using less powder. Getting worse with each wash. Also, had always taken 4 hours to run cycle which I thought was a bit long.
The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Bosch 24 in. SHU53 Built-in Dishwasher
Dishwasher takes hours to run through wash and dry cycle. what should normal cycle time be?
2 to 6 hours is possible. The newer machines have a water heat cycle that will raise the water temperature. lets say your incoming water is 90 degrees. The machine want to see 140 -165 depending on the cycle so that cycle will take 75 minutes to reac ... Kenmore Dishwashers
LG DISHWASHER, MODEL LDF6810WW, SER #706KWTA00393 ON STARTUP PUMP RUNS 10 TO15 MIN. BEFORE IT PROGRESSES TO NEXT STEP.THERE IS A LOUD HUM DURING THAT TIME. ALSO THE NORMAL WASH CYCLE TAKES ABOUT 3.5 HOURS. THE REPAIIRMAN HAS BEEN HERE 3 TIMES WITH NO RESULTS.
... LG LDF6810ST Stainless Steel Built-in Dishwasher
I have just moved into a new house with an Asko Dishwasher. It is not working. I program it, the icon for the cycle I have chosen lights up in red, I press start, that lights up in red, the water runs in for about 30 seconds and then nothing more happens. This happens on every wash cycle that I attempt to use. It does not appear to be on time delay as that icon does not light up. Also I have left it for a number of hours after I have tried to start it and still nothing happens. I would appreciat
... Asko Dishwashers
Brand new GE modelGLD4408RWW, runs for avery long time on the normal cycle (3 or 4 hrs.). Did not even flush the detergent out of the cup on the light wash, which ran for about an hour and 30 minutes. The dishes were not clean in either cycle.
Is the water hot enough prime the sink first then start the dish washer/make sure its hooked to hot water i know it sounds dumb but i have ran across that ... Dishwashers
Kenmore Limited Edition Ultra-Wash + QuietGuard dishwasher. Model number 665.110729521. Purchased from Sears Canada about 10 yrs ago. Symptoms: Cycle really long. Takes about 2.5 hours. Sensing light stays on all the time during cycle.
... Kenmore Dishwashers
Cycle time The cycle is taking 3 hours to go through a wash at 65 in a slimline model
First, read the manual before touching the settings. You need to set it up carefully but don't always change it unless you understand it. Secondly, if there's no change, call the Dealer. ... Bosch SHU3305 Dishwasher
Bosch she44c wash cycle time keeps extending. Once averaged about 130 minutes, now starts at about 150 minutes indicated. Seems to hang up at 1 or 2 minutes before cycle end, then keep running for as much as 4 hours. Water is hot, filters are clean.
We have had the same problem, except the water was not getting hot either. After a ton of research there was an issue that kept popping up. There was a massive recall on many of the model and serial #s. According to the recall there was a fire risk f ... Bosch Dishwashers